Hughes Supply 5 mm Clear Plastic L-Shaped Shelf Supports, PGH802CL

5 mm Clear Plastic L-Shaped Shelf Supports For Cabinets

5 mm clear plastic L-shaped shelf supports from Hughes Supply provide a defined ledge to carry adjustable shelves in cabinetry and similar casework. The L-shaped design creates a distinct shelf rest area, so the load sits on a flat platform instead of directly on the pin stem, which helps distribute weight across the shelf edge. The clear plastic material keeps the support visually low-profile against most cabinet interiors, which helps maintain a cleaner look on open or glass-door cabinets. These parts are classified as shelf supports, so they are intended specifically to support shelving rather than general fastener duty. The product is identified by manufacturer part number PGH802CL, which allows consistent reordering when matching existing hardware on repeat projects or service work.

Key Shelf Support Details That Impact Your Builds

• The shelf rest area is 1/2 inch long by 9/16 inch wide, giving the shelf a defined bearing surface that helps control how the front edge of the panel is supported along the cabinet side.
• The stem has a 3/16 inch bore, so the pin geometry is designed around that core dimension, which affects how the plastic body surrounds the metal center during load.
• The stem is 3/8 inch long, so the support engages the side panel to a predictable depth that matters when matching to existing drilling patterns in cabinet sides or gables.
• The design is L-shaped, so one leg sits in the side panel while the other projects inward as the shelf ledge, which simplifies reading orientation during installation and adjustments.
• The product is a non-fluted stem style, so the stem surface is smooth along its length, which affects how it seats in the hole compared to fluted or serrated alternatives.

Mounting Fit And Stem Details For Installation

This Hughes Supply shelf support is specified as a 5 mm clear plastic L-shaped design, so it is intended for use where 5 mm shelf support holes are part of the cabinet construction and a visually unobtrusive support is preferred. The 3/8 inch long stem dimension sets how far the support engages into the side panel, which matters when lining up with standard drilling depths and maintaining clearance from adjacent hardware or interior features. The non-fluted stem construction means the stem surface stays smooth as it is pushed into the hole, so installation feel and seating are governed by the drilled hole size rather than any ridged gripping features on the pin itself.

Using These Shelf Supports In Real Cabinet Work

Where These 5 mm Shelf Supports Are Applied

Hughes Supply 5 mm clear plastic L-shaped shelf supports sit under the edge of a shelf panel in cabinets, closets, or similar storage assemblies that use 5 mm side holes. The 1/2 inch by 9/16 inch shelf rest area defines the actual footprint where the shelf edge bears, which is useful when working with common panel thicknesses because the support face engages a controlled area under the shelf rather than a point contact. Their classification under shelf, closet, and garage organization highlights their role in supporting adjustable shelving, so they fit naturally into projects focused on modular storage layouts. The clear plastic body lets the underlying cabinet material remain the visual focus while still giving a solid seating point for the shelf. Because they are identified as shelf supports, they are intended to act as the interface between the drilled side holes and the adjustable shelves carried on them.

Details That Help Repeatable Shelf Positioning

The PGH802CL shelf supports use a 5 mm stem with 3/8 inch length, so every support seats to the same depth in a properly drilled row, which helps keep shelf heights level from left to right when four supports are used across a cabinet. The non-fluted stem construction means the sides of the stem are smooth along their engagement length, so the fit in the hole is controlled by the bore dimension rather than fluting, which can help achieve a more uniform feel across a run of holes produced with the same bit. The 3/16 inch bore at the core of the stem influences how the plastic body wraps around the inner opening, which matters to installers who track how shelf pins are built for specific cabinet systems. The 1/2 inch by 9/16 inch shelf rest platform gives a repeatable reference for the underside of the shelf, simplifying layout when marking or checking shelf positions relative to doors, drawers, or hardware in the same cabinet run.

Common Questions About Hughes Shelf Support Details

Select Hughes Supports For Consistent Shelf Rest Geometry

Choosing Hughes Supply 5 mm clear plastic L-shaped shelf supports with a 1/2 inch by 9/16 inch shelf rest area and 3/8 inch long non-fluted stem ties your adjustable shelving layout to known dimensions. Using part number PGH802CL across a project or program keeps the stem size, rest platform, and clear plastic appearance consistent from cabinet to cabinet. For production or repeat-fit work, that consistency in shelf rest geometry and stem engagement helps streamline drilling patterns and supports predictable shelf placement across your installations.