Bumpers Hemispherical, Clear Polyurethane Adhesive Backed 7/16" Diameter, 7/32" Thickness - 1210 Box Quantity

Clear Polyurethane Bumpers For Doors And Drawers

Clear polyurethane bumpers provide a simple way to add a soft contact point on doors and drawers, so panels meet frames with a cushioned stop instead of hard material-to-material impact during daily use. These bumpers are described as hemispherical, so their domed shape presents a small, defined contact area that touches the mating surface predictably when the door or drawer closes. Each bumper is made of durable polyurethane polymer, so the part resists breaking down under repeated opening and closing in typical woodworking and cabinet environments. The bumpers are clear, so they visually blend with many finishes while still delivering the same physical stop. A 7/16 inch diameter face spreads the impact over a moderate area, helping control noise at the contact point. The 7/32 inch thickness sets a consistent offset between surfaces, so repeated installations can share the same gap dimension.

Key Bumper Details For Everyday Use

• The durable polyurethane polymer construction creates a resilient contact point, so doors and drawers can close against the bumper repeatedly without the material losing its basic shape in normal service.
• The clear material provides a neutral appearance, so the bumper can serve as a functional stop on many cabinet or furniture finishes without adding a contrasting color at the contact location.
• The hemispherical form focuses contact at the crown of the dome, so the closing surface meets a consistent point that helps control where impact occurs on the frame or case.
• The 7/16 inch diameter face establishes a defined footprint, so installers can plan bumper placement on narrow rails or wider panels with a known contact area.
• The 7/32 inch thickness sets the stand-off between two surfaces, so door and drawer fronts can share a repeatable clearance when these bumpers are used at matching locations.
• The high quality pressure sensitive adhesive backing allows the bumper to be applied to a clean mounting surface without separate fastening steps, so installation is a peel-and-place operation.

Adhesive Backing And Dimensional Fit Details

The high quality pressure sensitive adhesive backing is designed to bond the bumper directly to the target surface, so installers can position the stop precisely and press it into place without drilling or other prep on most smooth substrates. The 7/16 inch diameter gives enough area for the adhesive layer to grip, so the bumper can support repeated closing cycles where the load remains within normal expectations for door and drawer contact. The 7/32 inch thickness defines how far the door or drawer front stands off when it rests on the bumper, so the same part can be used at multiple locations to keep reveals visually consistent along a run of cabinets or furniture pieces.

Using Polyurethane Bumpers In Workflows

Where These Door And Drawer Bumpers Fit

As a product in the Door and Drawer Bumpers class, these clear polyurethane adhesive backed parts are suited to flat mounting locations where a door, drawer face, or panel needs a cushioned stop point when closing. The hemispherical design works on cabinet frames, casework interiors, or similar woodworking assemblies where a small, predictable contact area is preferred over a broad pad. Because the bumpers are clear and made from polyurethane polymer, they can function on work surfaces, tables, and related furniture pieces that fall within the Work Surface & Tables and Bumpers category description, while maintaining a low visual profile. The adhesive backing lets the bumper be positioned at the exact strike point, so installers can tune door or drawer closure behavior during final assembly without changing hinges or other hardware.

Why These Bumper Details Support Consistent Results

The combination of a 7/16 inch diameter and 7/32 inch thickness gives each bumper a defined geometry, so repeated use of the same part number BS02CL11X22RP-BAR yields consistent stop height and footprint across a project. Durable polyurethane polymer construction means the hemispherical shape can compress slightly and rebound under typical closing forces, so the contact feel remains similar from one use to the next in everyday cabinet operation. The clear material helps keep attention on the door and drawer fronts rather than the stop, so hardware and finish choices stay visually prominent while still benefiting from a controlled closing point. As part of the Pro Value Series, these bumpers are presented as a practical option within the broader range of door and drawer bumpers, so installers can standardize on one clear polyurethane adhesive backed design for many casework and furniture applications. The door and drawer bumpers category positioning also signals the role of these parts as dedicated stops rather than general-purpose pads, so they can be specified when a defined close position is desired.

Common Questions About Clear Polyurethane Bumpers

Selecting These Bumpers For Your Next Project

Clear polyurethane bumpers with a 7/16 inch diameter, 7/32 inch thickness, and pressure sensitive adhesive backing provide a defined, cushioned stop for doors and drawers without changing other hardware. The hemispherical form and durable polyurethane polymer construction support consistent closing behavior across cabinets, work surfaces, and tables that rely on small contact points. Choosing the Pro Value Series BS02CL11X22RP-BAR part lets you specify a clear, adhesive backed door and drawer bumper that matches the described dimensions and materials for repeatable results on current and future woodworking projects.