Sound Dampening Bumpers Cylindrical Polyurethane Bumpers, Self-Adhesive, 1/2 dia. x 7/32 Height, Clear, 1000/Box

Sound Dampening Bumpers For Quiet Cabinet Closures

Sound Dampening Bumpers Cylindrical Polyurethane Bumpers are self-adhesive door and drawer bumpers that use a specialty sound damping design to deaden noise from closing cabinets or drawers. The bumpers are made of durable polyurethane polymer, so they provide a resilient contact point between the closing surface and the frame, reducing impact noise in everyday use. Each bumper is cylindrical with a 1/2 inch diameter and 7/32 inch height, giving a consistent stand-off that helps create an even gap when doors and drawers contact the case. The clear material keeps the bumper visually unobtrusive on most cabinet finishes, which matters when hardware should not distract from the finished work. High quality pressure sensitive adhesive backing allows the bumper to bond directly to the mounting surface, so the installer can place bumpers exactly where contact occurs.

Key Noise-Damping Details For Shop And Jobsite

• The durable polyurethane polymer construction forms a resilient stop point, which absorbs part of the impact when cabinets or drawers close and reduces sound in those high-contact areas.
• The high quality pressure sensitive adhesive backing creates a ready-to-stick surface, so bumpers can be pressed into position without additional adhesive, supporting straightforward installation in cabinet shops or on site.
• The specialty sound damping design is specifically intended to deaden noise from closing cabinets or drawers, which helps control sound levels in kitchens, offices, or other spaces with frequent door and drawer use.
• The clear cylindrical profile keeps the bumper low profile visually, so it serves its function without drawing attention on finished wood, painted, or laminated surfaces.
• The 1/2 inch diameter and 7/32 inch height give a repeatable size reference, helping installers match bumper placement to consistent reveal and contact points across multiple cabinet openings.

Self-Adhesive Bumper Layout And Application Workflow

These self-adhesive cylindrical polyurethane bumpers use a high quality pressure sensitive adhesive backing, so they are applied by pressing directly onto a clean mounting surface at the door or drawer contact point. The 1/2 inch diameter defines the footprint, which helps position the bumper where it will fully contact the mating surface during closing. With a 7/32 inch height, each bumper sets a small, predictable gap between the closing panel and frame as it compresses under normal contact. The clear polyurethane material keeps the bumper discreet on most cabinet interiors and face frames, which is useful where a visible stop would distract from the overall finish. As part of the Pro Value Series door and drawer bumpers category, they are suited to use wherever a sound-dampening stop point is required on cabinets or similar work.

Door And Drawer Bumpers For Everyday Cabinet Use

Where These Polyurethane Bumpers Are Typically Applied

These cylindrical polyurethane door and drawer bumpers are classified under Work Surface & Tables and Door and Drawer Bumpers, so they are intended for cabinet and similar furniture applications where doors or drawers close against a case or frame. The specialty sound damping design targets noise created when these components contact each other, so they are suited for kitchen cabinets, office casework, or work surfaces with hinged or sliding fronts. Because each bumper has a 1/2 inch diameter, they present a moderate contact area that works well at typical cabinet corner or edge locations. The 7/32 inch height adds a small projection to intercept doors and drawer fronts before wood, laminate, or other materials impact directly, which helps protect those contact points over repeated use.

How Design And Adhesive Support Consistent Results

The durable polyurethane polymer material gives these bumpers a combination of resilience and stability, so they can absorb impact while maintaining their cylindrical shape over time. That material behavior supports consistent door and drawer closing feel across multiple touch points on a run of cabinets. The high quality pressure sensitive adhesive backing provides a pre-applied bonding layer, so each bumper adheres where it is pressed into place without separate glue steps, which helps maintain layout accuracy on repetitive installations. Because the bumpers are clear, installers can place them on finished surfaces with minimal visual interruption, helping maintain the appearance of the Pro Value Series cabinet hardware setup. The defined 1/2 inch diameter and 7/32 inch height give predictable dimensions that can be repeated from opening to opening, supporting uniform gaps and contact throughout a project that relies on these door and drawer bumpers.

Common Questions About These Sound Dampening Bumpers

Selecting These Bumpers For Noise Control Projects

The Pro Value Series Sound Dampening Bumpers Cylindrical Polyurethane Bumpers offer a clear, self-adhesive option when a project calls for reduced cabinet or drawer closing noise. The combination of durable polyurethane polymer, specialty sound damping design, and high quality pressure sensitive adhesive backing supports consistent performance across multiple cabinet openings. With their 1/2 inch diameter, 7/32 inch height, and clear appearance, these door and drawer bumpers suit applications where a defined stop and quieter close are needed without changing the finished look of the work. For cabinet and woodworking projects through Wurth Baer Supply, this part number BS58SDCL10X20RP-BAR provides a straightforward way to add sound-dampening contact points.