Bumpers Hemispherical, Clear Polyurethane Adhesive Backed 5/16" Diameter, 3/32" Thickness - 1350 Box Quantity

Clear Polyurethane Adhesive Bumpers For Doors

Clear polyurethane adhesive bumpers are hemispherical, adhesive backed elements designed as door and drawer bumpers for work surfaces, tables, and cabinetry. Each bumper is made of durable polyurethane polymer, so it resists deformation in everyday door and drawer contact. The clear material keeps the bumper visually discreet on cabinets and furniture while still providing a functional stop point. A high quality pressure sensitive adhesive backing is pre-applied to each bumper, allowing straightforward peel-and-stick placement where impact control is required. With a 5/16 inch diameter, each bumper covers a compact contact area that suits door and drawer corners and frame landings. The 3/32 inch thickness sets a small, repeatable stand-off distance between surfaces, which helps control closing contact. The shape is hemispherical, so the first contact is centered, which promotes smooth, progressive contact instead of a flat, abrupt hit.

Key Polyurethane Door Bumper Details That Matter

• The hemispherical design focuses contact at a central point, which helps manage impact where doors or drawers meet frames or cases and supports predictable closing behavior on finished work.
• The clear polyurethane material keeps the bumper visually low profile, which allows use on visible cabinet faces, table undersides, or furniture edges without interrupting the finished appearance.
• The 5/16 inch diameter gives a compact footprint, which fits narrow rails and small drawer fronts while still providing enough area for effective cushioning on typical cabinet layouts.
• The 3/32 inch thickness creates a controlled gap, which protects facing surfaces from direct contact and helps maintain consistent reveals on doors and drawers when used in matched positions.
• The high quality pressure sensitive adhesive backing bonds the bumper to the mounting surface, which streamlines installation steps and supports repeatable placement on multiple doors or drawers in a run.
• The door and drawer bumper classification defines its role in hardware assemblies, which helps installers assign it as the final contact point in cabinet and furniture projects.

Adhesive Backed Bumper Fit And Placement Use

Each bumper uses a pressure sensitive adhesive backing, so installation consists of positioning the bumper on the target surface and pressing it into place to activate the adhesive. The 5/16 inch diameter works well on typical cabinet door corners, drawer fronts, and work surface contact points without crowding hinges or pulls. At 3/32 inch thickness, the bumper adds only a modest offset, which supports maintaining planned door and drawer overlay, reveals, and alignment. The hemispherical profile helps guide contact into the center of the bumper, which reduces edge shear on the adhesive bond during repeated open and close cycles. Being part of the Work Surface and Tables, Bumpers category, it suits mounting on finished cabinet carcasses, furniture pieces, and table structures wherever controlled contact is required.

Using Polyurethane Polymer Bumpers In Projects

Where These Hemispherical Bumpers Are Applied

This product is classified as door and drawer bumpers, so its primary use is to cushion and space moving fronts against frames or cases. The clear polyurethane polymer construction allows use on painted, stained, or laminated cabinetry where visual distraction needs to remain low. In work surface and table applications, the bumpers serve as contact points between tops and adjacent structures, using the 3/32 inch thickness to define a fixed separation. The 5/16 inch diameter allows positioning on narrow rails and face frames common in kitchen, bath, and built-in cabinetry. Because the bumpers are adhesive backed, they support use on fully finished surfaces without drilling or cutting operations, which helps keep finished edges and coatings intact during installation.

Why Dimensions And Adhesive Improve Consistency

The combination of a hemispherical shape and 5/16 inch diameter concentrates impact in the center of each bumper, which improves repeatability of how doors and drawers land during closing. The 3/32 inch thickness is thin enough to avoid large gaps yet thick enough to prevent face-to-face contact, so repeated installations can hold similar reveal lines across a bank of fronts. The durable polyurethane polymer material supports repeated compression and release at these dimensions, which maintains the designed stand-off over time in typical cabinet usage. The high quality pressure sensitive adhesive backing means each bumper installs with a consistent bond layer, contributing to uniform height and position across multiple pieces. As part of the Pro Value Series, the bumpers are identified for professional trade use, supporting batch installations on larger projects where consistency from piece to piece is important.

Common Questions About Clear Polyurethane Bumpers

Selecting These Bumpers For Cabinet Projects

The Pro Value Series hemispherical clear polyurethane adhesive backed 5/16 inch diameter, 3/32 inch thickness bumpers provide defined contact points for doors, drawers, work surfaces, and tables. The durable polyurethane polymer, precise dimensions, and pressure sensitive adhesive backing support consistent stand-off and controlled closing contact across multiple fronts. For cabinet, furniture, or work surface projects that require discrete, clear door and drawer bumpers in a repeatable size, this configuration aligns with typical trade requirements.