Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Sound dampening bumpers give cabinet and drawer projects a simple way to cut impact noise at closing. These cylindrical polyurethane bumpers use a soft durometer polymer that cushions doors and drawers, so the closing impact is absorbed instead of transferred into the casework. The 1/2 inch diameter contact area spreads the load as the door or drawer hits, and the 5/32 inch height provides just enough stand-off to create a consistent, quiet stop. The clear material keeps the bumper visually low profile on most finishes, which helps finish-focused shops maintain a clean look while still adding sound control. As part of the Pro Value Series line of door and drawer bumpers, this part is specified for sound damping, so it supports repeatable noise reduction when standard hard stops would create more sound.
These sound dampening bumpers use a high quality pressure sensitive adhesive backing, so the installer places each bumper directly on the door, drawer, or case surface at the intended contact point and presses it into position. The cylindrical 1/2 inch diameter footprint offers enough surface area for the adhesive to grip typical cabinet-grade substrates. At 5/32 inch height, each bumper sets a defined stop spacing that can be matched across multiple openings for consistent reveals. Because the bumpers are clear, they can be positioned on visible corners or stiles without drawing attention away from the surrounding finish, which suits both shop production runs and on-site adjustments.
These cylindrical polyurethane door and drawer bumpers are part of the Pro Value Series, positioning them for everyday cabinet, furniture, and casework applications where noise reduction is important. Their role as specialty sound damping bumpers means they are specifically designed to deaden noise resulting from closing cabinets or drawers, so they work well at typical hinge-side or corner impact points on doors and drawer fronts. The clear finish helps them disappear on painted, stained, or laminate surfaces, allowing use on face frames, frameless cabinet edges, or furniture carcasses without noticeably changing the finished appearance. With their 1/2 inch diameter and 5/32 inch height geometry, they are suited to flat mounting locations that need a defined, soft contact point instead of a hard mechanical stop.
The durable polyurethane polymer construction gives these sound dampening cabinet bumpers a resilient working surface, so they compress slightly on impact and then recover, maintaining a consistent stop point over repeated closings. The soft durometer behavior described in the SAP description works together with the cylindrical 1/2 inch diameter to spread impact loads, which helps reduce sharp noise spikes when doors and drawers meet the case. The 5/32 inch height gives installers a predictable stand-off that can be used across a run of cabinets to create a uniform feel as doors close. Their pressure sensitive adhesive backing simplifies workflow by making each bumper a ready-to-apply component, so placement becomes a quick final step instead of a separate hardware installation operation. The manufacturer part number BS33SDCL10X20RP-BAR provides a repeatable reference for reordering the same geometry and material when jobs require consistent bumper performance.
These sound dampening bumpers are made of durable polyurethane polymer, which provides a resilient, impact-absorbing surface for repeated cabinet and drawer use.
The bumpers use a high quality pressure sensitive adhesive backing, so they mount by being pressed onto the target surface at the desired contact point.
Each cylindrical bumper has a 1/2 inch diameter and a 5/32 inch height, creating a defined contact area and stop gap for cabinet and drawer fronts.
These specialty sound damping bumpers are specifically designed to deaden noise resulting from closing cabinets or drawers by cushioning impact at the contact point.
These bumpers are clear, so they visually blend with many cabinet and furniture finishes when installed on visible doors, drawer fronts, or frames.
This item is classified as a door and drawer bumper in the Work Surface & Tables | Bumpers category, aligning it with typical cabinet and furniture applications.
The Pro Value Series sound dampening bumpers provide a clear, cylindrical polyurethane stop that is specifically designed to deaden noise from closing cabinets and drawers. With a 1/2 inch diameter footprint, 5/32 inch height, and high quality pressure sensitive adhesive backing, they support straightforward placement at critical contact points. For projects that require a soft durometer, low-visibility stop on finished casework, this BS33SDCL10X20RP-BAR part number offers a defined geometry and material combination that can be specified, installed, and reordered consistently across jobs.
Sold In: 1 Box