Knape And Vogt 22 Inch Drawer Slides For Smooth Travel

Knape and Vogt 22 inch drawer slides in the 8405 Series provide a side mount, ball bearing drawer slide solution for cabinets where controlled travel is important. The 8405B EB 22 model delivers 1 inch over-travel, allowing the drawer to extend past the cabinet face so the back of the drawer is easier to access in daily use. The slide height of 1-13/16 inches gives a compact profile that fits many drawer side designs while still supporting a ball bearing mechanism. These slides are non-handed, so the same part works on either side of the drawer, helping streamline layout and installation. Ebony Black finish provides a dark appearance that blends with darker cabinet interiors or hardware, supporting consistent project aesthetics.

Key 8405B EB 22 Details For Real-World Projects

• KV Model 8405 with 1 inch over-travel lets the drawer open beyond the cabinet front, which helps reach items at the back without shifting contents around.
• Side clearance of 1/2 inch plus 1/32 inch, minus 0 inch on each side defines the space between drawer and cabinet, supporting accurate drawer box sizing and predictable slide action.
• Side mount, ball bearing design supports drawers along the cabinet side panels, providing a familiar installation approach for shops already set up for side mount slides.
• The 1-13/16 inch slide height offers a relatively low profile, which helps in tighter vertical spaces while still accommodating the internal ball bearing system.
• Lever disconnect allows the drawer member to be separated from the cabinet member, which simplifies drawer removal for finishing, transport, or interior cabinet work.
• A ball retainer latch and polymer stop cushions work together to hold the slide components in place and soften end-of-travel contact, supporting controlled movement and reducing hard impacts.

Mounting And Clearance Details For Clean Installation

These Knape and Vogt 22 inch drawer slides use a side mount configuration, so the slides fasten along the drawer sides and cabinet sides in line with many shop standards. Recommended fasteners are #7 x 1/2 inch Phillips pan head screws, which match the slide hole sizing for proper gripping without excessive projection into the drawer material. The specified 1/2 inch plus 1/32 inch, minus 0 inch side clearance on each side defines the required gap, guiding drawer box width when working from cabinet opening dimensions. A 1-13/16 inch slide height helps with layout against drawer side height so the slide sits where the cabinet design requires. The non-handed design means the same 8405B EB 22 slide can be used on both left and right sides, helping keep inventory and jobsite labeling straightforward.

Using KV 8405 Over Travel Slides In Cabinet Builds

Where The 8405B EB 22 Slides Are Applied

The 8405B EB 22 drawer slides belong to the KV Model 8405 Series, a side mount, ball bearing family suited to cabinets that benefit from 1 inch over-travel. That added extension helps when drawers store items toward the back, because the rear area moves beyond the cabinet face for easier viewing and reach. The ebony black finish gives these slides a dark appearance that coordinates with black or darker-toned cabinet interiors, helping hardware visually recede when drawers are open. Non-handed construction means there is no separate left or right hand part number within this model, so pairs can be pulled directly for either side during assembly. Because the slide height is 1-13/16 inches, it works with many common drawer side heights, allowing the hardware to sit within the side panel without requiring unusual proportions.

Details That Support Repeatable Drawer Performance

The side clearance specification of 1/2 inch plus 1/32 inch, minus 0 inch on each side provides a clear target for drawer box width, supporting consistent fit across a run of cabinets. Ball bearing construction supports smooth linear motion between the cabinet member and drawer member, which helps drawers operate predictably under normal usage. Lever disconnect allows installers to mount cabinet members inside the case, then attach drawer members to the drawer boxes and reconnect them, which simplifies finishing sequences and adjustments. The ball retainer latch helps hold the bearing elements where they belong during use, supporting long-term slide function. Polymer stop cushions soften contact as the drawer reaches its designed stop, which helps reduce harsh metal-to-metal impact and contributes to a more controlled opening and closing feel. Recommended #7 x 1/2 inch Phillips pan head screws tie into the slide hole pattern effectively, supporting secure mounting into typical cabinet materials.

Common Questions About KV 8405B EB 22 Slides

Select KV 8405B EB 22 Slides For Precise Drawer Action

The Knape and Vogt 22 inch 8405B EB 22 drawer slides combine side mount, ball bearing construction with 1 inch over-travel for improved drawer access. Their defined 1/2 inch plus 1/32 inch, minus 0 inch side clearance helps establish dependable drawer box sizing. Features such as lever disconnect, ball retainer latch, polymer stop cushions, and a non-handed design support straightforward installation and consistent slide performance across cabinet runs.