Amerock Highland Ridge Series Black Bronze 8" (203 mm) Center to Center Appliance Pull, -BP55322BBR

Amerock Highland Ridge Appliance Pull For Appliances

Amerock Highland Ridge appliance pull is a black bronze handle designed for appliance-scale doors where a longer grip is needed. The 8 inch (203 mm) center-to-center mounting spreads the load across the panel, which helps when operating heavier fronts in busy spaces.

The pull is made from zinc, so the body provides a solid feel while keeping weight manageable on large doors. Its black bronze finish gives a dark, grounded look that supports design schemes ranging from darker woodwork to painted cabinet runs.

The overall length of 10-7/16 inches extends beyond the mounting points, giving users a generous handhold across wide appliance faces. A projection of 1-5/8 inches offsets the grip from the surface, giving fingers clearance when opening tall or integrated fronts.

The 7/8 inch width offers a stable gripping surface without feeling bulky, which helps users get a secure pull even when hands are wet or gloved during day-to-day kitchen work.

Key Highland Ridge Black Bronze Pull Details

• The 8 inch (203 mm) center-to-center layout creates a predictable drilling pattern, which supports consistent alignment when multiple appliance fronts use the same pull size across a run.
• The black bronze finish delivers a dark, refined visual, allowing this pull to coordinate with other black or bronze hardware so projects can follow a unified color story.
• The zinc material construction forms a rigid handle body, helping the pull stand up to repeated use on refrigerator, freezer, or panel-ready dishwasher fronts.
• The 10-7/16 inch overall length gives extra hand space at each end of the pull, which helps users get leverage across wide or tall doors during regular operation.
• The 1-5/8 inch projection holds the grip away from the door face, providing room for fingers to wrap around the bar and reducing knuckle contact with the panel surface.
• The 7/8 inch width presents a slim but confident profile, which keeps the handle from feeling oversized while still offering a solid, centered grip point.

Mounting And Fit Details For This Pull

This Amerock 8 inch center-to-center pull uses fixed posts set 8 inches (203 mm) apart, so layout work revolves around that exact spacing for drilling and through-bolting on appliance panels.

The base length of 1-15/16 inches at each post defines the footprint that rests on the surface, which helps installers plan clearances around panel edges, neighboring trim, or overlay cabinet doors.

A base width of 13/16 inch concentrates the contact area into a neat, compact pad, giving a clean seating area for each mounting post on both wood and panel-ready appliance faces.

This projection and footprint combination supports comfortable use on deeper fronts, allowing hands to clear door edges and surrounding cabinetry during pulling motions.

Using The BP55322BBR Pull In Real Projects

Where The Amerock Highland Ridge Appliance Pull Fits

The Amerock Highland Ridge appliance pull, part number BP55322BBR, is positioned for appliance-scale applications where an 8 inch center-to-center layout is already planned or preferred. Its length and projection suit refrigerator doors, freezer fronts, and panel-ready dishwashers that benefit from a longer gripping bar.

The black bronze finish works well in projects that call for darker hardware against woodgrain or painted surfaces. Because the pull sits 1-5/8 inches off the door face, it offers a consistent clearance that feels familiar across a full appliance wall using the same series.

The 7/8 inch width keeps the handle visually balanced on both narrow and wider panels, so the same model can be used on different appliance fronts without the hardware looking out of scale. The 10-7/16 inch overall length also gives designers and installers a clear reference when centering the pull relative to panel dimensions.

By using a zinc body with a black bronze finish, the BP55322BBR integrates into hardware packages that rely on metal pulls throughout the space, aligning appliance fronts with surrounding cabinet doors and drawers.

Details That Support Consistent Mounting Results

The 8 inch (203 mm) center-to-center spacing on this Amerock Highland Ridge appliance pull establishes a precise drilling pattern, allowing jigs and templates to be reused from cabinet fronts to appliance panels for consistent alignment.

The 1-15/16 inch base length at each post defines how far the mounting pads extend along the panel surface, which helps installers position the pull so the bases sit fully on flat sections of the door skin.

With a base width of 13/16 inch, each mounting point occupies a modest amount of surface area, concentrating clamping force where the posts meet the door for a tidy, defined footprint.

The 1-5/8 inch projection sets the handle off the face enough to clear raised profiles or light door reveals, providing working room for fingers during pulling without crowding adjacent cabinetry.

Using the 8-32 x 1-1/4 inch screws specified for this pull ties directly to common shop hardware practices, so installers can work with familiar thread size while securing the handle through typical appliance panels or door materials.

Together, these dimensions and screw details help create repeatable, straight installations when the same BP55322BBR pull is used across multiple doors in a single project.

Common Questions About This Amerock Appliance Pull

Selecting This Pull For Appliance-Scale Doors

The Amerock Highland Ridge appliance pull in black bronze, model BP55322BBR, combines an 8 inch center-to-center layout with a 10-7/16 inch overall length, zinc construction, and 1-5/8 inch projection to support appliance-scale fronts.

The defined base dimensions and 8-32 x 1-1/4 inch screw specification give installers clear mounting parameters. For projects calling for a dark, coordinated handle across multiple large doors, this pull offers consistent sizing and finish from one installation to the next.