Berenson Advantage Plus Two 3" (76 mm) Center to Center Weathered Nickel Pull, 9356-10WN-P

Berenson Advantage Plus Two Pull For Cabinets

Berenson Advantage Plus Two pull is a zinc die cast handle in the Advantage Plus collection, giving cabinet builders a defined product line to match across a job. The 3 inch center to center dimension sets consistent drilling for doors or drawers. The overall 3-3/8 inch length keeps the pull compact, which helps on smaller fronts where space is tight. A projection of 1-3/16 inch provides finger clearance from the cabinet face, supporting a comfortable grip when opening heavier fronts. The 1/8 inch width keeps the profile slim, which reduces visual bulk while still marking a clear hand hold. A base diameter of 3/8 inch gives a small footprint against the surface, which helps when laying out hardware close to panel edges. The Weathered Nickel finish provides a muted metal look, which works well where a softer, aged tone is preferred over bright metal.

Key Details Of This Weathered Nickel Pull

• The 3 inch center to center mounting size allows repeatable hole placement across multiple cabinets, which speeds layout and installation on larger runs.
• The 3-3/8 inch overall length keeps the pull within a compact footprint, which helps fit it on narrow rails or smaller drawer fronts without crowding edges.
• The 1-3/16 inch projection creates working space behind the pull, which supports a solid grip and reduces contact with the cabinet surface during use.
• The zinc die cast material provides a solid metal construction, which supports a reassuring feel in hand during everyday cabinet opening and closing.
• The Weathered Nickel finish delivers a toned-down metallic appearance, which helps the pull blend with other Weathered Nickel components on the project.

Mounting Dimensions For Straightforward Alignment

The 3 inch center to center dimension defines the distance between mounting points, which guides drilling jigs and templates for fast, repeatable installation. The 3/8 inch base diameter keeps the contact point compact, which is useful when positioning the pull near panel edges or decorative profiles. With a 3-3/8 inch overall length, the pull spans slightly beyond the mounting holes, which provides visual balance on standard cabinet rails. The 1-3/16 inch projection sets the standoff from the door or drawer face, which can help align with nearby knobs or pulls using similar projections.

How This Cabinet Pull Works In Real Projects

Where This 3 Inch Center Pull Fits Best

This pull belongs to the Advantage Plus collection from Berenson Corporation, which gives designers and installers a defined family for coordinating cabinet hardware. The 3 inch center to center spacing fits layouts built around this common drilling size, supporting consistent hole patterns throughout a room. The 3-3/8 inch length suits standard cabinet doors and drawers, so one model can serve multiple locations. Its 1-3/16 inch projection keeps hands clear of the surface, which is helpful on frequently used doors such as base cabinets. The 1/8 inch width keeps the pull visually light, an advantage on smaller fronts where wide hardware might dominate the design. Weathered Nickel finish allows use in spaces calling for a softer, aged metal tone, which can tie together hinges and other Weathered Nickel components.

Details That Support Repeatable Installation Results

The 3 inch center to center measurement anchors layout, so templates and drilling jigs can be set once and used across doors and drawers without re-measuring. The defined 3-3/8 inch overall length helps with visual alignment, letting installers center the pull relative to panel width while knowing the hardware stays within expected bounds. A 3/8 inch base diameter tightens the working area around each mounting location, which is valuable when fitting the pull near glass, insets, or routed details. The 1-3/16 inch projection controls how far the pull stands off the face, helping coordinate with neighboring hardware that follows similar projections for a uniform look. Zinc die cast construction gives a consistent form, which supports predictable fit against the cabinet surface. The manufacturer part number 9356-10WN-P uniquely identifies this Weathered Nickel version, which helps match specifications when ordering for repeat jobs or future additions.

Common Questions About The Berenson 9356-10WN-P Pull

Select This Pull For 3 Inch Cabinet Layouts

The Berenson Advantage Plus Two pull in Weathered Nickel offers a 3 inch center to center layout, a 3-3/8 inch length, and 1-3/16 inch projection that align well with common cabinet drilling and grip needs. Its zinc die cast construction and defined dimensions support consistent results across multiple fronts. For projects built around Weathered Nickel hardware and 3 inch centers, this 9356-10WN-P pull provides a clearly specified option.