
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Belwith Keeler Cavalier 3 inch pull gives cabinets a defined grip point using a 3 inch (76 mm) center to center design, which sets consistent hole spacing for straightforward layout across doors and drawers. The zinc material forms a solid pull body, supporting regular cabinet use in kitchens, bathrooms, or entry ways where repeated opening and closing are part of daily workflow. An antique brass finish covers the pull surface, creating a classic brass tone that ties into traditional or warm-toned projects while visually distinguishing the pull from door and drawer faces. The Cavalier collection designation identifies this pull as part of a broader decorative hardware family, which helps maintain a consistent design language when multiple pulls are installed on the same run of cabinets or throughout a room.
The 3 inch center to center layout on this Belwith Keeler P127-AB pull aligns the mounting posts at a fixed distance, supporting accurate drilling when laying out new cabinet fronts. With an overall length of 5 inches, the pull extends past the mounting points, which positions the grip area so fingers naturally land between the fasteners during operation. A 3/4 inch projection defines the standoff from the cabinet face, affecting both hand access behind the pull and clearance around adjacent cabinets or walls. The 1/2 inch width concentrates the contact area into a narrow band, which is useful when positioning multiple pulls on small drawers without crowding edges or neighboring hardware.
The Cavalier collection reference in the web description identifies this pull as part of a decorative hardware line suited to updating kitchens, bathrooms, or entry ways, so the same P127-AB profile can appear on base cabinets, wall cabinets, or entry storage. Being categorized under handles and pulls positions it for use on cabinet doors and drawers, giving a consistent handhold across different cabinet types in one installation. The antique brass finish mentioned in both the SAP description and web description ties into designs that call for brass-toned hardware, so it can visually coordinate with antique brass hinges or other brass-finished components in the same space. Because the length is listed as 5 inches with a 3 inch center to center, the pull offers a familiar size often used on standard cabinet widths, supporting layouts that balance proportion and grip area on common door and drawer sizes.
The explicit 3 inch (76 mm) center to center measurement on this Belwith Keeler cabinet handle anchors drilling templates and jigs to a common spacing, which streamlines repeat installations across multiple doors and drawers. With the projection set at 3/4 inch, installers can anticipate how far the pull stands off the face and allow for that when cabinets meet at corners or near walls, reducing interference where clearances are tight. The combination of 1/2 inch width and 5 inch overall length defines the rectangle of hardware visible on the face, which helps align multiple pulls in straight lines and keep margins even from panel edges. Zinc as the material is specified in the web description, giving a metal base that suits typical indoor cabinet environments in woodworking applications served by Wurth Baer Supply. The manufacturer part number P127-AB ties these dimensions and the antique brass finish to a single identifier, which supports consistent reordering when additional cabinets or replacement fronts are added later.
The Belwith Keeler Cavalier P127-AB pull has a 3 inch (76 mm) center to center measurement, so holes are drilled 3 inches apart for mounting across cabinet doors or drawers.
The P127-AB pull has a 5 inch overall length, providing extended grip area beyond the 3 inch mounting points on cabinet faces.
The Cavalier series P127-AB pull is made from zinc, giving a metal construction suited to everyday cabinet door and drawer operation.
The P127-AB pull uses an antique brass finish, delivering a classic brass tone that coordinates with other antique brass cabinet hardware.
The Belwith Keeler cabinet handle has a 3/4 inch projection, setting the distance from the cabinet surface to the front of the pull for finger clearance.
The Cavalier P127-AB pull has a 1/2 inch width, creating a narrow visible band on the cabinet front that helps maintain balanced proportions on smaller fronts.
The Belwith Keeler Cavalier series 3 inch center to center antique brass pull combines defined dimensions with a zinc construction and a 5 inch overall length, giving installers a known layout and finish for cabinet doors and drawers. With projection, width, and color clearly specified, this P127-AB handle can be matched to existing 3 inch hole patterns or planned into new cabinet runs where a brass-toned, compact-profile pull is needed. For projects drawing from Wurth Baer Supply offerings in decorative hardware and moldings, this pull provides a specific part number that ties appearance and mounting details together for repeat use.
Sold In: 1 Each