
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Belwith Keeler Cavalier 3 inch pull is a zinc cabinet handle in an antique brass finish designed for cabinetry and similar surfaces. The 3 inch center to center dimension spaces the mounting holes for standard cabinet layouts, which simplifies drilling and replacement on many existing fronts that already follow this measurement. The overall 5-1/2 inch length gives the pull a larger hand contact area around the 3 inch mounting span, which helps with grasping doors or drawers in heavier-use areas. A 3/4 inch projection sets the grip off the face just enough to clear fingers from the cabinet surface, supporting everyday opening and closing. The 5/8 inch width keeps the profile visually slim while still providing a defined edge to pull against. The antique brass finish delivers a traditional metallic look that coordinates with other warm-toned decorative hardware across kitchens, baths, or entry built-ins.
This Cavalier series cabinet pull uses a 3 inch center to center dimension, so installers position two mounting points at that distance when setting up new cabinet faces or swapping hardware on existing fronts with the same spacing. The 5-1/2 inch overall length leaves material on each side of the mounting holes, which helps the handle visually anchor wide or narrow fronts without crowding the panel edges. With a 3/4 inch projection off the face, the pull creates enough hand clearance to operate doors and drawers while keeping the handle close to the cabinet for a tight, built-in look. The 5/8 inch width influences how much of the rail or stile the pull visually covers, helping installers plan alignment relative to panel lines and door styles.
The Belwith Keeler Cavalier P131-AB pull belongs to the Cavalier collection, which is described for use when updating a kitchen, bathroom, or entry way. That means the 3 inch center to center layout suits typical cabinet doors and drawer fronts in these spaces, allowing a consistent hardware run across banks of cabinets. The antique brass finish supports projects where a warm, classic metal tone is desired on face-frame or frameless cabinets in these rooms. The 5-1/2 inch overall length lets this pull span more of the drawer or door face in kitchens or baths, adding visual continuity from smaller doors to larger drawer stacks. The zinc construction provides a consistent base piece across multiple pulls, which supports a uniform look when repeating this model across all fronts in a room.
The defined 3 inch center to center spacing on the P131-AB pull gives installers a fixed drilling reference, which simplifies creating jigs or templates for repeating hole locations across many cabinet fronts. The 3/4 inch projection helps keep hands offset from the cabinet finish during use, which can reduce finger contact at the edge of doors and drawers as they are opened in busy kitchens, baths, or entry areas. A 5/8 inch width shapes how the handle sits against stiles and rails, letting installers position it so the pull aligns with surrounding trim lines without dominating narrow frames. The antique brass finish applied to the zinc body allows a continuous color tone from pull to pull, aiding projects where a unified antique brass hardware appearance is planned across multiple rooms or cabinetry runs.
The Belwith Keeler Cavalier P131-AB pull has a 3 inch center to center dimension, so mounting holes are spaced 3 inches apart to match this hardware pattern on cabinet doors or drawers.
The P131-AB pull has an overall length of 5-1/2 inches, which lets it cover more of the door or drawer front around the 3 inch mounting span for added visual balance.
This Cavalier series pull projects 3/4 inch from the cabinet surface, creating finger clearance behind the handle while keeping the hardware relatively close to the front.
The P131-AB pull is made from zinc with an antique brass finish, giving a metallic base with a warm brass appearance to coordinate with similar decorative hardware.
The Cavalier collection is described for updating kitchens, bathrooms, or entry ways, so this pull suits cabinetry and similar fronts in those areas.
This cabinet pull is from Belwith Keeler and part of the Cavalier collection, so it matches other Cavalier pieces for coordinated hardware runs.
The Belwith Keeler Cavalier 3 inch pull pairs a 3 inch center to center layout with a 5-1/2 inch overall length, giving both standard hole spacing and a generous grip area for kitchen, bath, or entry cabinetry. Its 3/4 inch projection and 5/8 inch width define how the handle sits in hand and on the door or drawer face, helping plan clearances and visual balance. With zinc construction and an antique brass finish from the Cavalier collection, this P131-AB pull gives a consistent look across multiple fronts when sourced through Wurth Baer Supply.
Sold In: 1 Each