Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Kitchen Kompact Glenwood wall cabinet GW36R is a 36 inch wide, 21 inch high and 12 inch deep wall cabinet that provides a defined storage footprint, which helps lay out upper cabinet runs with predictable spacing above counters or work areas. The Glenwood designation ties this unit to the Kitchen Kompact Glenwood line, so it aligns visually with other Glenwood pieces in a run when matching style is important on a job. The recessed panel design on this wall cabinet creates a distinct front appearance that coordinates with recessed panel doors and fronts in the same series, supporting consistent elevation lines. As a wall cabinet, this GW36R unit mounts above base cabinets to add vertical storage while keeping floor space open for traffic and equipment. The Kitchen Kompact brand connection links this cabinet to a defined product class, which matters when a project standardizes on Kitchen Kompact components.
This Glenwood 36R wall cabinet uses solid wood hanging strips on wall cabinets located at the top and bottom, creating clear fastening bands for anchoring into studs or other structural backing along those lines. That arrangement lets installers align fasteners across a run of wall cabinets so loads are transferred through the solid wood strips. All frames are built of solid 3/4 inch oak, maple or beech, giving a sturdy face frame that maintains alignment between adjacent units and helps doors stay even across a bank. Solid wood corner blocks that are glued and power nailed keep the box from racking, which supports square installation when cabinets are shimmed, leveled, and tied together on the wall.
The GW36R Glenwood 36 inch wide wall cabinet fits upper storage runs where a 21 inch high by 12 inch deep unit is specified, allowing planners to align it above matching base cabinets from the same Kitchen Kompact Glenwood series. As a Kitchen Kompact wall cabinet in the Kitchen Kompact category and product class, it slots into projects that are already using Kitchen Kompact components for a coordinated layout. All frames built of solid 3/4 inch oak, maple or beech support door hardware and opening cycles in active kitchen or workroom environments where wall space carries regular load changes. End panels with 3 ply construction and a 1/2 inch thick engineered wood core with hardwood veneers deliver a stable cabinet side that resists typical interior humidity swings while presenting a hardwood veneer surface along exposed ends. Solid wood hanging strips on wall cabinets located at the top and bottom give installers defined points to engage structure over the cabinet width, which matters when this 36 inch wide unit is part of a continuous run and must support stored contents evenly.
Each rail on this Glenwood 36R cabinet is kiln-dried, joined by mortise and tenon, and then glued for added strength, so the face frame behaves as a single, solid unit when clamping adjacent cabinets together, helping seams stay tight over time. Solid wood corner blocks that are glued and power nailed provide rigid corner reinforcement, which helps keep the cabinet square as it is lifted, positioned, and fastened across multiple mounting points. Solid wood hanging strips on wall cabinets at the top and bottom give a consistent fastening surface, simplifying layout for fastener placement along a run and supporting even load transfer through the strips. End panels with 3 ply construction, a 1/2 inch thick engineered wood core, and hardwood veneers balance strength with a finished outer face, so exposed ends look uniform while the engineered core supports screws driven within rated applications. Across base units in the same line, solid wood 3/4 inch thick toe kicks offer a substantial base structure that keeps stacked or aligned cabinets sitting true where wall and base units meet in a full installation.
The GW36R Glenwood wall cabinet is 36 inches wide, 21 inches high, and 12 inches deep, so it occupies a defined upper cabinet space when planning wall layouts.
This Kitchen Kompact cabinet has frames built of solid 3/4 inch oak, maple or beech, providing a sturdy structure for mounting doors and hardware in everyday service.
The GW36R cabinet rails are kiln-dried, joined by mortise and tenon, and glued, creating strong frame joints that help keep doors aligned over repeated opening cycles.
This Glenwood wall cabinet uses solid wood hanging strips on wall cabinets located at the top and bottom, giving defined zones for fastening into structural backing.
The Kitchen Kompact GW36R uses solid wood corner blocks that are glued and power nailed, helping the cabinet stay square during handling and in service.
The GW36R end panels use 3 ply construction with a 1/2 inch thick engineered wood core and hardwood veneers, giving stable sides with a hardwood veneer surface.
The Glenwood 36R wall cabinet combines a 36 inch wide by 21 inch high by 12 inch deep format with solid wood frame construction, so it fits upper runs that call for Kitchen Kompact Glenwood styling and defined storage capacity. Solid wood hanging strips located at the top and bottom of wall cabinets give consistent mounting zones, which helps when this cabinet is part of a longer line of uppers. End panels with 3 ply construction, a 1/2 inch thick engineered wood core, and hardwood veneers provide stable, finished sides that suit exposed or partially exposed wall positions. Selecting this GW36R cabinet lets projects keep to the Kitchen Kompact Glenwood series while using a size and structure intended for regular wall cabinet duty.
Sold In: 1 Each