Kitchen Kompact 30"W x 21"H x 12"D Glenwood Wall Cabinet, Recessed Panel - GW30R

Kitchen Kompact Glenwood Wall Cabinet For Kitchens

Kitchen Kompact Glenwood wall cabinet gives you a 30 inch wide, 21 inch high, 12 inch deep storage cabinet that fits standard wall runs where this size is needed. The recessed panel design of the Glenwood line provides a consistent front appearance that supports clean layouts in kitchen projects. The cabinet is built under the Kitchen Kompact brand and identified as model GW30R, so it can be specified accurately alongside other Glenwood units on a plan. This 30 inch cabinet size works as a common upper over worktops or as part of a staggered height layout when mixing different cabinet heights. The wall cabinet format helps free base space while still providing a defined storage zone, which is useful in tight runs or above appliances. Matching this wall unit with other Kitchen Kompact cabinets helps keep door style and construction details uniform across the job.

Construction Details That Support Daily Use

• All frames are built of solid 3/4 inch oak, maple or beech, giving the face frame a substantial structure that resists flex during handling and use, which helps doors stay aligned over time.
• Each rail is kiln-dried, joined by mortise and tenon, and then glued for added strength, so the frame joints are tight and stable, which supports repeated opening and closing without loosening at the corners.
• Solid wood corner blocks are glued and power nailed, tying the cabinet box together at critical stress points, which helps the cabinet hold square during installation and while loaded.
• Solid wood toe kicks, 3/4 inch thick, create a robust base construction across the line, which keeps the overall run feeling solid when this wall cabinet is combined with matching base units.
• Solid wood hanging strips on wall and base cabinets, located at the top and bottom, provide defined mounting surfaces, which makes fastening to wall framing more predictable and helps distribute the cabinet load.
• End panels use 3 ply construction with a 1/2 inch thick engineered wood core and hardwood veneers, giving a flat, stable side panel that takes finish consistently while resisting typical jobsite humidity changes.

Wall Cabinet Mounting And Alignment Characteristics

The Kitchen Kompact 30 inch wide Glenwood wall cabinet uses solid wood hanging strips at the top and bottom of the cabinet, giving clear zones for fasteners into studs or other structural backing. These continuous strips spread the cabinet weight across more fastener points, which is helpful when setting the cabinet over countertops or appliances. The 21 inch height and 12 inch depth are sized to line up with common kitchen layouts, which simplifies marking level lines and keeping reveals consistent with adjacent cabinets. The solid 3/4 inch frame at the front stiffens the box during lifting and positioning, so the cabinet can be held in place while fasteners are driven without racking the openings. The engineered wood core end panels with hardwood veneers provide flat sides for tight seams where cabinets sit next to each other in a run.

Using This Glenwood GW30R Cabinet In Projects

Where The Kitchen Kompact Wall Cabinet Fits

The Kitchen Kompact Glenwood GW30R wall cabinet, at 30 inches wide by 21 inches high by 12 inches deep, fits well above standard base cabinets where a shorter upper is preferred, such as under soffits or where vertical space is limited. The recessed panel style matches the Glenwood line, so this size can be mixed with other Glenwood cabinets while keeping a unified door and frame look along the wall. Solid 3/4 inch oak, maple or beech frames allow this cabinet to sit at the end of a run or between other units without the front flexing under door loads. The 3 ply, 1/2 inch thick engineered wood end panels with hardwood veneers provide stable, flat sides that align cleanly against neighboring cabinets, which is useful when creating long, straight runs in kitchen installations.

Details That Support Repeatable Cabinet Results

The Kitchen Kompact Glenwood wall cabinet uses kiln-dried rails joined with mortise and tenon and glue, creating consistent, tight frame joints that help doors hang true from one cabinet to the next. Solid wood corner blocks that are glued and power nailed keep the cabinet box square, which supports accurate alignment of doors and reveals after installation. Solid wood hanging strips at both the top and bottom of wall and base cabinets give installers predictable fastening zones, helping maintain level and plumb lines over multiple cabinets in the same run. The 3/4 inch solid wood toe kicks across the Kitchen Kompact line allow this wall cabinet to coordinate with base units that share the same construction approach, which supports a unified feel of strength in the overall kitchen assembly. The 3 ply engineered wood core end panels with hardwood veneers offer stability against normal indoor humidity shifts, supporting straight seams and minimizing adjustment work later.

Common Questions About The Glenwood GW30R Cabinet

Choose This Glenwood Wall Cabinet For Coordinated Runs

The Kitchen Kompact Glenwood 30 inch wide by 21 inch high by 12 inch deep wall cabinet provides a defined size that fits many upper cabinet positions while matching the Glenwood recessed panel style. Solid 3/4 inch oak, maple, or beech frames, kiln-dried mortise and tenon rails, and glued, power-nailed corner blocks support a rigid box that works well in multi-cabinet runs. Solid wood hanging strips at the top and bottom simplify locating strong fastening zones along wall framing. Selecting this GW30R cabinet through Wurth Baer Supply allows it to be specified with other Kitchen Kompact units so the construction details and appearance stay consistent across the project.