Kitchen Kompact Glenwood wall cabinet is a 24 inch wide, 21 inch high, 12 inch deep wall cabinet designed for upper kitchen runs and similar installations. The cabinet belongs to the Glenwood series, identified by manufacturer part number GW24R and description GLENWOOD 24R, which helps match this unit with other Glenwood components in a layout. All frames are built of solid 3/4 inch oak, maple or beech, so the face structure provides a hardwood surface ready for finishing systems that expect a solid-wood frame. The design uses a recessed panel style, which keeps the profile clean while still tying into traditional framed construction. This combination of solid frames and series-specific identification supports consistent appearance across multiple cabinets on the same wall.
The Glenwood 24R wall cabinet measures 24 inches wide, 21 inches high, and 12 inches deep, so it fits standard upper cabinet depths and works in typical 24 inch modules. Solid wood hanging strips are used at the top and bottom of wall cabinets, giving two continuous mounting members that accept wall fasteners across the width. This layout helps transfer cabinet and contents load into the stud field rather than concentrating it at a single point. The solid frame of 3/4 inch oak, maple or beech ties into the box, so door forces work through a rigid face rather than a thin edge.
This 24 inch wide, 21 inch high, 12 inch deep Glenwood wall cabinet works as a standard upper unit in kitchen, break room, or similar wall runs that follow 12 inch deep cabinets. The solid 3/4 inch hardwood frame at the front gives a firm structure for hanging doors and for aligning adjacent cabinets in a straight line. Because the manufacturer part number is GW24R and the description is GLENWOOD 24R, this model aligns with other Glenwood series pieces when building a coordinated elevation. End panels with 3-ply construction, a 1/2 inch thick engineered wood core, and hardwood veneers provide flat, stable sides that blend visually with the solid-wood frame, supporting a consistent finished appearance along exposed ends.
Each rail in the frame is kiln-dried, joined by mortise and tenon, and then glued, so the front of the cabinet is built to stay square as conditions change, which supports tight reveals and reduces hinge adjustment drift. Solid wood corner blocks that are glued and power nailed tie the box together, helping the cabinet hold its shape when lifted, clamped, and fastened on the wall. Solid wood hanging strips on wall and base cabinets, located at the top and bottom, provide defined mounting zones that help installers place fasteners where solid material backs them. End panels using 3-ply construction with a 1/2 inch thick engineered wood core and hardwood veneers keep the cabinet sides stable, which contributes to plumb alignment when multiple units are ganged. Solid wood toe kicks, 3/4 inch thick, give base cabinets a solid front support area that complements the wall units when designing full-height runs.
The Glenwood 24R wall cabinet is 24 inches wide, 21 inches high, and 12 inches deep, fitting common upper cabinet layouts that use 12 inch deep wall units and 24 inch modules.
The cabinet frame is built of solid 3/4 inch oak, maple or beech, providing a hardwood face that supports door loads and keeps the front structure rigid in service.
Each rail is kiln-dried, then joined by mortise and tenon and glued, creating a strong joint that helps the frame stay square and maintain alignment through daily use.
End panels have 3-ply construction with a 1/2 inch thick engineered wood core and hardwood veneers, giving a stable, flat surface suited to finishing and long wall runs.
The cabinet uses solid wood hanging strips on wall cabinets, located at the top and bottom, providing continuous solid mounting areas for wall fasteners across the width.
Solid wood corner blocks are glued and power nailed, tying the corners together so the cabinet resists racking during handling and while supporting loads on the wall.
The Kitchen Kompact Glenwood 24 inch wide, 21 inch high, 12 inch deep wall cabinet combines a solid 3/4 inch hardwood frame with kiln-dried, mortise-and-tenon-joined rails, solid wood corner blocks, and solid wood hanging strips. End panels with 3-ply construction and a 1/2 inch thick engineered wood core with hardwood veneers support flat, stable sides across longer runs. For projects built around the Glenwood series, using the GW24R part number keeps this recessed panel wall cabinet aligned with matching units along the same wall.
Sold In: 1 Each