Kitchen Kompact sink base cabinet in the DW30RBS model provides a 30 inch wide, 34-1/2 inch high, 24 inch deep base specifically sized to anchor a sink run, so layouts follow standard kitchen dimensions without custom modification. Door frames use mortised and tenoned construction in solid 3/4 inch maple, creating a tight, stable joint that keeps doors square during everyday opening and closing. Flat panel plywood inserts use a three-ply panel with a rotary cut hard maple veneer face, so the recessed look stays consistent across the door faces. Beech, flat panel doors present a clean recessed-panel profile that pairs with the DWhite finish line for a unified appearance across Kitchen Kompact cabinets. Solid wood hanging strips are located on the top and bottom of the cabinet, giving solid grab points when fastening the unit to wall studs or adjoining cabinets during installation.
This Kitchen Kompact 30 inch wide sink base stands 34-1/2 inches high and 24 inches deep, matching standard base cabinet sizing so countertop and sink installation lines up with adjacent units. Solid wood hanging strips at both the top and bottom provide continuous fastening areas, so installers can run screws into studs or neighboring cabinets along a solid backing rather than thin panel edges. Solid wood toe kicks built at 3/4 inch thickness give a robust contact area along the floor, which supports templating and scribing of finished flooring or trim around the base.
The Kitchen Kompact 30 inch wide DW30RBS sink base slots into standard base runs where a 24 inch deep, 34-1/2 inch high unit is required under a sink opening, so layouts align with common countertop heights and depths. Beech, flat panel doors with a recessed profile and maple veneer flat panels suit projects using the DWhite line, maintaining visual continuity when combined with other Kitchen Kompact cabinets in the same finish family. Solid wood hanging strips at the top and bottom of the cabinet make this base well suited to wall-to-wall installations or island runs where solid fastening points improve alignment across multiple boxes. Solid wood toe kicks at 3/4 inch thickness support integration with typical kitchen flooring transitions because the toe area can interface cleanly with flooring materials and simple trim details.
Mortised and tenoned 3/4 inch solid maple door frames create strong joints that help doors remain square during door adjustment and long-term use, which reduces the need for repeated tweaks to keep reveals even. Flat panel plywood inserts built as a three-ply panel with a rotary cut hard maple veneer face add stability to the recessed center, helping the door face resist warping that could affect hinge performance. Solid wood corner blocks that are glued and power nailed tie the cabinet box together at load-bearing points, which matters when the sink base must carry both the countertop and the additional weight associated with sink installations. The plywood drawers, combined with a front to back epoxy-coated drawer system anchored into a solid wood strip at the rear of the cabinet, support smooth drawer travel and help keep the drawer square under typical loading from tools, cleaning supplies, or kitchen items stored below the sink. Adjustable shelves offer flexibility to work around plumbing penetrations by allowing the shelf to be positioned to clear supply and drain lines, making it easier to reclaim usable storage space inside the base after rough-in work is complete.
The Kitchen Kompact DW30RBS sink base measures 30 inches wide, 34-1/2 inches high, and 24 inches deep, so it aligns with standard base cabinet and countertop layouts.
The DW30RBS door frames use mortised and tenoned 3/4 inch solid maple with flat panel plywood inserts, providing stable, square doors that support consistent gaps and hinge performance.
The cabinet uses beech, flat panel doors with a recessed look and flat panel plywood inserts faced with rotary cut hard maple veneer, giving a coordinated recessed-panel appearance.
Solid wood hanging strips located at the top and bottom of the cabinet provide solid fastening zones, helping secure the unit to studs and neighboring cabinets along its full width.
The cabinet uses plywood drawers with a front to back epoxy-coated drawer system attached to a solid wood strip at the back, supporting smooth drawer travel under normal loads.
The cabinet uses a four-step process of stain, sealer, sanding, and catalyzed top coat, creating a finished surface designed to handle typical kitchen use and cleaning.
The Kitchen Kompact DW30RBS sink base cabinet combines 30 inch width, 34-1/2 inch height, and 24 inch depth with mortised and tenoned 3/4 inch maple door frames, flat panel plywood inserts, and solid wood corner blocks, giving a solid foundation for a sink area. Solid wood hanging strips and solid wood toe kicks support straightforward alignment with adjacent cabinets and flooring, while adjustable shelves and plywood drawers with epoxy-coated drawer systems help organize the space under the sink. For projects built around DWhite recessed-panel fronts, this sink base provides a matching, construction-focused option ready to drop into standard base cabinet layouts.
Sold In: 1 Each