Kitchen Kompact 33 inch sink base cabinet DW33RBS is a 33 inch wide, 34-1/2 inch high, 24 inch deep DWhite sink base that provides a standard-size footprint for many kitchen sink layouts, so installers can plan runs and clearances around known dimensions. The cabinet design uses recessed, beech flat panel doors, which create a clean face style that works well in straightforward kitchen lines and simplifies door alignment across adjacent units. Door frames are mortised and tenoned construction of solid 3/4 inch maple, giving each door solid wood joints that hold alignment under normal use over time. A flat panel plywood insert is a three-ply panel with a rotary cut hard maple veneer face, so the door center panel stays stable while presenting a hard maple appearance on the front. Solid wood toe kicks at 3/4 inch thick form a sturdy base area that accepts on-site finish trimming and provides a solid toe space structure.
The Kitchen Kompact DW33RBS sink base uses solid wood hanging strips located on the top and bottom, giving installers continuous wood at these edges for fastening the cabinet to wall studs or adjacent units during layout. Solid wood corner blocks are glued and power nailed, so the front frame, sides, and bottom stay tied together as a rigid box while the cabinet is lifted, positioned, and clamped in place. Concealed, self-closing hinges are used on the doors, which hide hinge hardware from the front and pull doors closed to a consistent position, reducing door adjustment passes once the run is installed. Adjustable shelves inside the cabinet let installers or owners change shelf height to work around plumbing or stored items, without altering the cabinet structure. The overall cabinet size of 33 inches wide by 34-1/2 inches high by 24 inches deep aligns with common base cabinet runs, simplifying layout with neighboring pieces.
The Kitchen Kompact DW33RBS sink base is a DWhite 33 inch wide, 34-1/2 inch high, 24 inch deep base cabinet sized for typical kitchen sink locations, so it fits naturally into standard counter depths and base cabinet lines. Beech, flat panel doors on the front present a simple recessed panel style that blends into a wide range of straightforward kitchen designs, supporting consistent door appearance when used with other Kitchen Kompact pieces in the same line. The flat panel plywood insert uses a three-ply construction with a rotary cut hard maple veneer face, giving the visible panel area a hard maple look that coordinates with the solid 3/4 inch maple door frames. Inside, adjustable shelves allow repositioning to clear plumbing, water filters, or cleaning supplies, using the full depth and width of the 24 inch deep base where available. Solid wood toe kicks, 3/4 inch thick, create a strong lower front that integrates into toe-space trim along the run.
Door frames are mortised and tenoned construction of solid 3/4 inch maple, so each corner consists of interlocking solid wood joints that help doors resist racking and stay aligned with nearby fronts through daily opening and closing. Solid wood corner blocks are glued and power nailed, bracing the inside corners to hold the cabinet square from the factory through installation, which supports accurate leveling, shim work, and countertop templating. Solid wood hanging strips located on the top and bottom give installers defined fastening zones where screws can bite into solid stock along the cabinet length, improving pull resistance when walls are uneven. Adjustable shelves inside the cabinet allow shelf pins to be repositioned as storage needs or plumbing layouts change, using the same cabinet box without modification. The front to back epoxy-coated drawer system is securely attached to a solid wood strip in the back of the cabinet for stability, so the drawer components track from front frame to solid rear support for smoother operation. A 4 step process of stain, sealer, sanding and catalyzed top coat is applied, creating a layered finish that protects the maple and plywood faces under normal kitchen humidity and cleaning routines.
The Kitchen Kompact DW33RBS sink base measures 33 inches wide, 34-1/2 inches high, and 24 inches deep, so it fits common base cabinet and countertop layouts in many kitchen runs.
The DW33RBS door frames use mortised and tenoned construction of solid 3/4 inch maple, which provides solid wood joints that help keep doors aligned and stable during regular kitchen use.
The DW33RBS doors use a flat panel plywood insert that is a three-ply panel with a rotary cut hard maple veneer face, giving the recessed area a hard maple look with stable construction.
The DW33RBS cabinet uses adjustable shelves, so shelf positions can be changed inside the box to work around plumbing or storage needs while keeping the cabinet structure unchanged.
The DW33RBS cabinet uses concealed, self-closing hinges, which hide hinge hardware from the front and pull doors closed to a repeatable position for a tidy cabinet face.
The DW33RBS uses plywood drawers with a front to back epoxy-coated drawer system securely attached to a solid wood strip in the back, stabilizing drawer movement along the cabinet depth.
The Kitchen Kompact 33 inch sink base cabinet DW33RBS offers a DWhite recessed panel design, 33 inch width, 34-1/2 inch height, and 24 inch depth, aligning with common base layouts for many kitchens. Solid 3/4 inch maple mortised and tenoned door frames, three-ply flat panel plywood inserts with rotary cut hard maple veneer face, and 3/4 inch thick solid wood toe kicks work together to form a stable, traditional cabinet structure. Adjustable shelves, concealed self-closing hinges, and the epoxy-coated drawer system attached to a solid wood rear strip provide functional interior and hardware details. When a project calls for a sink base built around solid wood frame construction and a straightforward recessed panel style, this DW33RBS cabinet offers those characteristics for coordinated runs.
Sold In: 1 Each