Kitchen Kompact sink base cabinet DW42RBS is a 42 inch wide, 34-1/2 inch high, 24 inch deep DWhite sink base that anchors a run under the sink with a consistent footprint. The recessed, beech flat panel doors present a flat panel style that aligns visually with other flat panel fronts in a kitchen layout. Door frames use mortised and tenoned construction of solid 3/4 inch maple, creating tight mechanical joints that help door corners stay square over time. Flat panel plywood inserts use a three-ply panel with a rotary cut hard maple veneer face, so the panel surface is hard maple while the core supports the face against typical cabinet use. Solid wood hanging strips located on the top and bottom create fixed mounting zones that accept wall fastening along the cabinet length. The cabinet body is part of the Kitchen Kompact line, so it fits within that product class for coordinated jobs.
The 42 inch width, 34-1/2 inch height and 24 inch depth give the Kitchen Kompact 42 inch cabinet a standard base footprint that drops into typical counter layouts, simplifying alignment with adjacent cabinets. Solid wood hanging strips on the top and bottom create predictable fastening lines, so fasteners land in solid wood along the full length of the cabinet back. Solid wood corner blocks that are glued and power nailed tie the sides to the front and back, helping the cabinet stay square during leveling. Solid wood toe kicks at 3/4 inch thick carry front-edge contact with the floor, supporting the cabinet base while leaving the recessed toe area open. These structural details work together so the sink base can be pulled into plane with nearby units while maintaining box integrity.
The Kitchen Kompact DW42RBS recessed panel sink base is sized for a 42 inch under-sink location, so it occupies a central position in many kitchen cabinet runs. The DWhite 42 inch sink base dimension of 34-1/2 inches high by 24 inches deep lines up with neighboring base cabinets that share the same height and depth. Beech, flat panel doors tie into other flat panel fronts in the Kitchen Kompact product class, giving a consistent face across multiple units. The solid wood toe kicks at the front define the toe space visually while carrying vertical load at the base. Plywood drawers are standard, and they sit on a front to back epoxy-coated drawer system that is securely attached to a solid wood strip in the back of the cabinet for stability, so drawer motion stays supported within the sink base footprint.
The mortised and tenoned construction of solid 3/4 inch maple door frames creates stable joints that help doors stay aligned with the face frame, which is important when installers set uniform gaps across a bank of cabinets. Adjustable shelves inside the cabinet allow shelf height to be changed, letting installers match interior spacing to plumbing or stored items without cutting fixed supports. Concealed, self-closing hinges keep the hinge hardware out of sight when the recessed panel doors are closed and pull the doors shut at the end of travel, supporting clean lines on the front of the cabinet. The plywood drawers use a front to back epoxy-coated drawer system that is securely attached to a solid wood strip in the back of the cabinet for stability, helping drawers track smoothly along their path. The four step process of stain, sealer, sanding and catalyzed top coat applied to the cabinet surfaces gives the wood a finished layer, which maintains the DWhite sink base appearance as doors, drawers and shelves are used.
The Kitchen Kompact sink base cabinet DW42RBS measures 42 inches wide, 34-1/2 inches high and 24 inches deep, so it follows a standard base cabinet footprint in a kitchen run.
The DW42RBS uses mortised and tenoned solid 3/4 inch maple door frames with flat panel plywood inserts, giving recessed panels supported by solid maple framing at the corners.
The DW42RBS uses concealed, self-closing hinges, so the hardware is hidden when doors are shut and the hinges pull the doors closed at the end of travel.
The Kitchen Kompact DW42RBS uses plywood drawers on a front to back epoxy-coated drawer system that is securely attached to a solid wood strip in the back for stability.
The DW42RBS has adjustable shelves, allowing shelf positions to be changed within the cabinet interior to clear plumbing or match storage height needs.
The DWhite 42 inch sink base receives a four step process of stain, sealer, sanding and catalyzed top coat, creating a layered finish over the cabinet wood surfaces.
The Kitchen Kompact DW42RBS sink base cabinet combines a 42 inch wide, 34-1/2 inch high, 24 inch deep footprint with recessed, beech flat panel doors, so it sets a defined under-sink position in DWhite layouts. Mortised and tenoned solid 3/4 inch maple door frames, solid wood corner blocks, and solid wood hanging strips create a reinforced box that holds alignment as it is fastened into a run. Plywood drawers on an epoxy-coated front to back system and adjustable shelves support interior organization within the sink base space. For projects built around the Kitchen Kompact product class, this recessed panel DWhite 42 inch sink base ties structural details and appearance into a single unit ready for installation.
Sold In: 1 Each