Glenwood base cabinet GW12B is a 12 inch wide Kitchen Kompact base cabinet that fills narrow runs where storage and alignment still matter. The cabinet stands 34-1/2 inches high and 24 inches deep, so it fits standard base cabinet height and depth in a run of Glenwood units. All frames are built of solid 3/4 inch oak, maple or beech, which provides a solid structure for doors and fronts in everyday kitchen use. The recessed panel Glenwood design keeps the style consistent with the rest of the Glenwood line while this 12 inch footprint uses minimal floor space. The 12 inch width works as a transition between larger cabinets, and the consistent height and depth help keep countertops level from piece to piece. Solid frame construction supports normal kitchen loads without the flex that can make doors harder to align over time.
This Kitchen Kompact base cabinet uses solid wood hanging strips at the top and bottom of the box, giving fixed fastening lines that help set the cabinet plumb and secure against wall studs or neighboring cabinets. The solid wood toe kicks at 3/4 inch thickness create a reliable base that supports shims and finished toe applications along the floor. End panels with 3 ply construction and a 1/2 inch engineered wood core keep the cabinet sides stable while hardwood veneers on the faces give a consistent surface for finishing next to other Glenwood units. Solid 3/4 inch frames in oak, maple or beech let fasteners bite into solid wood around the face, which helps hold front alignment when cabinets are pulled together in a row.
This 12 inch Glenwood base cabinet works in narrow spaces where a full-depth 24 inch cabinet is needed but the width is limited, such as between appliances or at the end of a short wall. The 34-1/2 inch height matches typical base cabinet height, so countertops line up when this unit is combined with other Glenwood 12B units or wider Glenwood bases. Because all frames use solid 3/4 inch oak, maple or beech, this narrower cabinet still supports standard countertop loads along the front edge. The 3 ply end panels with a 1/2 inch engineered wood core and hardwood veneers allow the cabinet side to present as a finished end when exposed at the end of a run. Solid wood toe kicks let this cabinet sit firmly in line with adjoining bases while providing a consistent toe profile along the floor.
The kiln-dried rails joined by mortise and tenon and then glued create predictable, square joints at the face frame, which helps doors and drawer fronts align consistently across multiple Glenwood base cabinets. Solid wood corner blocks that are glued and power nailed tie the cabinet sides to the face and back, so the box holds its shape during handling, positioning, and fastening to walls or other cabinets. Solid wood hanging strips at the top and bottom of the back give two solid fastening zones, which helps the cabinet stay tight against the wall and reduces movement that can throw off reveals. The 3 ply end panel build with a 1/2 inch engineered wood core and hardwood veneers keeps the sides resistant to warping, supporting straight seams where cabinets meet. These construction choices let installers work with predictable squareness, reducing adjustment time when setting a series of Glenwood base units.
The Glenwood base cabinet GW12B is 12 inches wide, 34-1/2 inches high, and 24 inches deep, so it fits standard base cabinet height and depth while occupying a narrow 12 inch space.
The frame of this Kitchen Kompact base cabinet is built of solid 3/4 inch oak, maple or beech, providing a solid front structure for fastening doors and aligning adjacent cabinets.
On the Glenwood GW12B, each rail is kiln-dried, joined by mortise and tenon, and then glued, creating strong joints that help the face frame stay square in typical kitchen conditions.
This cabinet uses solid wood hanging strips at the top and bottom of wall and base cabinets, giving solid fastening areas to secure the cabinet to wall framing or neighboring units.
The end panels use 3 ply construction with a 1/2 inch thick engineered wood core and hardwood veneers, helping the cabinet sides stay flat while presenting a hardwood surface.
On the GW12B, the 3/4 inch thick solid wood toe kicks provide a sturdy base at floor level, supporting toe finishes and continuous alignment along a base cabinet run.
The Glenwood base cabinet GW12B pairs a 12 inch width with 34-1/2 inch height and 24 inch depth, so it fits standard base lines while solving tight layout spots. Solid 3/4 inch frames in oak, maple or beech work with kiln-dried mortise and tenon rails, solid wood corner blocks, and 3 ply end panels to keep the box square and stable. Solid wood hanging strips and toe kicks give defined fastening and support points. When a run of Glenwood cabinets needs a narrow base that still carries full-depth counters, this GW12B layout keeps construction and dimensions consistent.
Sold In: 1 Each