Kitchen Kompact Glenwood base cabinet identifies this 21 inch wide, 34-1/2 inch high, 24 inch deep unit as a fitted kitchen base cabinet, so installers can plan runs and layouts using a known footprint. The recessed panel design on this Glenwood base cabinet defines the face style, which supports consistent visual alignment with other Glenwood recessed panel units on the same project. The cabinet is built under the Kitchen Kompact product class, tying it into a coordinated line for projects that standardize on this manufacturer. The base cabinet format makes it suitable wherever a standard 34-1/2 inch height and 24 inch depth are required, which helps maintain level countertop height through a kitchen.
This Glenwood 21B base cabinet measures 21 inches wide, which lets it fill narrower base openings in a run while still offering a full-height cabinet box for storage. The 34-1/2 inch height matches standard base cabinet dimensions, so it lines up with other base units to support countertop installation at a consistent working height. The 24 inch depth matches common countertop depths, allowing the front frame to sit properly under the front edge. Solid wood hanging strips positioned at the top and bottom of the base cabinet create predictable zones where fasteners can be driven into studs or neighboring cabinets without interfering with the 3-ply end panel core.
The Glenwood 21B base cabinet is a Kitchen Kompact unit sized at 21 inches wide, 34-1/2 inches high, and 24 inches deep, so it fits naturally into kitchen layouts built around standard base dimensions. As a recessed panel Glenwood cabinet, it aligns with other Glenwood pieces where a consistent recessed panel face across base cabinets is desired. The solid 3/4 inch hardwood frame around the front provides a firm boundary for aligning adjacent cabinets, especially at filler zones or transitions where precise front alignment is critical. Solid wood toe kicks at the base offer a defined front footprint at floor level, which supports toe-space trim while maintaining a sturdy connection between the cabinet box and the floor plane in a run.
Each rail on this Glenwood GW21B cabinet is kiln-dried, joined by mortise and tenon, and then glued, so the front frame resists twisting when cabinets are clamped together and fastened during installation. Solid wood corner blocks that are glued and power nailed tie the cabinet corners together, helping keep the box square while it is being maneuvered and leveled. Solid wood hanging strips located at the top and bottom of the base cabinet define strong fastening zones, which helps maintain alignment when securing the cabinet to studs or to adjacent units along the run. The 3-ply end panels with a 1/2 inch engineered wood core and hardwood veneers create side walls that balance dimensional stability with a hardwood exterior, supporting a straight, smooth side surface that aligns with neighboring cabinets and end panels.
The Glenwood 21B base cabinet is 21 inches wide, 34-1/2 inches high, and 24 inches deep, which aligns with standard base cabinet and countertop layouts in many kitchen installations.
The Kitchen Kompact cabinet frame is built of solid 3/4 inch oak, maple or beech, giving a hardwood structure at the front for fastening hinges and maintaining alignment between adjoining cabinets.
The Glenwood base cabinet rails are kiln-dried, joined by mortise and tenon, and glued, so the front frame joints are engineered for strength under daily use and during cabinet run assembly.
The Glenwood cabinet end panels use 3-ply construction with a 1/2 inch engineered wood core and hardwood veneers, combining a stable core with hardwood faces for exposed or flush-end conditions.
The 3/4 inch solid wood toe kicks form a structural front base, which supports floor-level trim and helps transfer the vertical load of countertops down to the floor.
The Glenwood base cabinet has solid wood hanging strips at the top and bottom, giving defined fastening locations when securing the cabinet to studs or to neighboring cabinets.
The Kitchen Kompact Glenwood 21B base cabinet pairs a 21 inch width and standard 34-1/2 inch height with solid wood framing, toe kicks, corner blocks, and hanging strips, giving a defined, hardwood-structured box for kitchen runs. The 3-ply end panels with engineered wood cores and hardwood veneers add stable sides with wood-faced exteriors suitable for exposed ends. For projects designed around Glenwood recessed panel styling and standard base dimensions, this GW21B cabinet provides a matching, structurally detailed option to slot into the layout.
Sold In: 1 Each