Kitchen Kompact Glenwood base cabinet gives you a 15 inch wide, 34-1/2 inch high, 24 inch deep base unit that fits narrow runs while still matching Glenwood styling. This base cabinet uses a recessed panel design that keeps the look consistent across a Glenwood run, which matters when lining up doors and drawer fronts for a clean visual line. The cabinet is built as a base unit, so its 34-1/2 inch height works with standard countertop heights, helping maintain an even work surface. The 24 inch depth lines up with typical kitchen base layouts, so installers can keep standard front overhangs and align this cabinet with adjacent units. With its Glenwood identity tied to part number GW15B and SAP description GLENWOOD 15B, it fits into Glenwood job plans where specific series identification is required for layout or replacement work.
This Kitchen Kompact 15 inch wide base cabinet works into layouts where a narrow base is needed between larger units or next to appliances, while maintaining the Glenwood line. Its 34-1/2 inch height lets installers bring countertops to a standard finished height, keeping work surfaces consistent from cabinet to cabinet. The 24 inch depth sets up a standard footprint, so fronts line up with adjacent bases and toe kicks. Solid wood hanging strips placed at the top and bottom of the cabinet provide clear structural fastening zones for anchoring into framing, which helps keep the box tight to walls and floors. The 3/4 inch solid wood toe kick supports the cabinet front at floor level, giving a solid surface to rest shims against for a stable, level base run.
The Kitchen Kompact 15 inch wide Glenwood base cabinet fits runs where a narrow base is needed without breaking the Glenwood style line. Its recessed panel design ties into other Glenwood cabinets, so door faces maintain the same profile across the kitchen. With a 34-1/2 inch height, the cabinet supports a standard countertop build-up, helping installers carry a straight level line around corners and along walls. The 24 inch depth aligns this base with other standard-depth cabinets, so fronts, toe kicks, and end panels remain in the same plane. Solid wood corner blocks at each corner keep the box rigid when moving it into position, so side-to-side racking is reduced as the cabinet is slid into tight spaces or set against neighboring units.
Solid 3/4 inch oak, maple, or beech frame members give this Glenwood base cabinet a strong face frame that holds hinges and door hardware under repeated door use, supporting long-term alignment. Kiln-dried rails joined with mortise and tenon and then glued build a frame that resists seasonal movement at the joints, which helps keep reveals even. Solid wood hanging strips at the top and bottom create two continuous fastening bands, so fasteners can be placed where they tie directly into structural members, improving pull-out resistance. The 3/4 inch solid wood toe kick supports the front vertically and helps distribute load at the floor, which is useful when cabinets support heavier countertop materials. The 3-ply end panels, with a 1/2 inch engineered wood core and hardwood veneers, blend dimensional stability with a hardwood-faced exterior, giving a stable fastening surface on the sides while maintaining a hardwood look.
The Kitchen Kompact Glenwood GW15B base cabinet is 15 inches wide, 34-1/2 inches high, and 24 inches deep, which matches standard base cabinet footprints in many kitchen layouts.
The Kitchen Kompact Glenwood base cabinet uses solid 3/4 inch oak, maple, or beech for all frames, giving a solid wood structure that supports hinges and keeps the face frame stable.
The Glenwood 15 inch base cabinet rails are kiln-dried, joined by mortise and tenon, and then glued, creating strong joints that help maintain squareness at the face frame.
The cabinet uses solid wood corner blocks that are glued and power nailed, plus 3/4 inch thick solid wood toe kicks, helping keep the box rigid and stable at floor level.
The Kitchen Kompact base cabinet has solid wood hanging strips located at the top and bottom, providing structural zones for fastening into wall or floor framing.
The Glenwood base cabinet end panels use 3-ply construction with a 1/2 inch thick engineered wood core and hardwood veneers, offering stability with a hardwood-faced surface.
The Kitchen Kompact Glenwood 15 inch wide base cabinet, identified as GW15B and GLENWOOD 15B, gives installers a narrow base option that still aligns with Glenwood recessed panel styling. Its solid 3/4 inch wood frame, mortise-and-tenon joined rails, and solid wood corner blocks create a structurally sound box suited to everyday kitchen duty. Solid wood hanging strips and a 3/4 inch solid wood toe kick provide defined structural zones for fastening and support along walls and floors. The 3-ply end panels with an engineered wood core and hardwood veneers finish out the sides with a stable, hardwood-faced surface. Use this cabinet when a 15 inch Glenwood base is needed to complete a run while maintaining consistent height, depth, and face detailing.
Sold In: 1 Each