
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Kitchen Kompact Glenwood valance in the 48 inch width is a recessed panel light valance designed for use with Glenwood cabinet runs. The GW48VAL part number identifies this specific 48 inch wide, 5-1/2 inch high, 3/4 inch thick Glenwood light valance. All frames are built of solid 3/4 inch oak, maple, or beech, so the valance matches the solid wood frame construction used across the Glenwood line. Each rail is kiln-dried, joined by mortise and tenon, and then glued, creating a stable connection that resists movement in normal kitchen environments. Solid wood corner blocks are glued and power nailed in the cabinet system, supporting rigid joints that help the valance line up cleanly with adjacent components. Solid wood toe kicks in the Glenwood construction work with this valance to keep the overall run visually consistent from floor to underside trim.
The Glenwood 48 inch recessed panel valance is 3/4 inch thick, so its thickness matches the solid 3/4 inch frames used throughout Kitchen Kompact Glenwood cabinets. This consistent 3/4 inch dimension helps the front faces line up when tying the valance into wall cabinets or bridging sections. The 5-1/2 inch height gives a defined light valance profile while coordinating with the proportions of Glenwood doors and rails. Because the rails are kiln-dried and joined with mortise and tenon joints before gluing, the assembled valance resists twisting, supporting straight alignment across the 48 inch span. In a continuous run, this matching construction helps the recessed panel valance blend cleanly with other Glenwood components.
The Kitchen Kompact Glenwood valance works with Glenwood cabinets that share the same solid 3/4 inch oak, maple, or beech frame construction. In a typical installation, the 48 inch width spans between wall cabinets or across an open area where a recessed panel light valance is needed. Because the Glenwood system uses solid wood hanging strips at the top and bottom of wall and base cabinets, the valance aligns visually with these structural elements. The 5-1/2 inch height gives enough face to cover under-cabinet lighting zones while staying in proportion with the surrounding 3/4 inch thick frames and rails.
The GW48VAL Glenwood light valance follows the same construction approach described for Glenwood: all frames are solid 3/4 inch wood, each rail is kiln-dried, joined by mortise and tenon, and then glued. This method reduces the likelihood of joint creep and helps the recessed panel center stay square to the rails. Solid wood corner blocks in the overall cabinet construction are glued and power nailed, so when the valance terminates at a corner, it meets a stable structure that supports clean joints. Solid wood toe kicks at 3/4 inch thickness maintain the same material profile vertically, which keeps visual lines consistent between the toe space and the valance level. Solid wood hanging strips on wall and base cabinets, located at the top and bottom, give predictable structural backing in the run, helping the valance tie into a system that is designed around solid wood attachment zones.
The Kitchen Kompact Glenwood GW48VAL is a 48 inch wide, 5-1/2 inch high, 3/4 inch thick recessed panel light valance built to match Glenwood cabinet frame construction.
The 3/4 inch solid wood frame matches Glenwood cabinet frames, so the valance aligns in thickness and movement, helping face frames and trim stay even over time.
The Glenwood valance uses kiln-dried rails joined by mortise and tenon and then glued to create tight, stable joints that keep the recessed panel profile straight along its length.
Solid wood corner blocks in the Glenwood cabinet system are glued and power nailed, giving the valance a rigid structure to meet at corners for cleaner joints.
The 5-1/2 inch height provides a defined light rail face that coordinates with Glenwood door and rail proportions, helping under-cabinet areas look balanced.
The valance shares 3/4 inch solid wood construction with Glenwood toe kicks and hanging strips, supporting a consistent material profile across the cabinet run.
The Kitchen Kompact Glenwood valance with part number GW48VAL provides a 48 inch wide, 5-1/2 inch high, 3/4 inch thick recessed panel trim that matches Glenwood cabinet construction. With solid 3/4 inch oak, maple, or beech frames and kiln-dried, mortise-and-tenon-joined rails, it aligns structurally and visually with Glenwood cabinets. Solid wood corner blocks, toe kicks, and hanging strips within the Glenwood system give this valance a coordinated context, helping cabinet runs present as one continuous, solid wood installation. Use this Glenwood light valance wherever a matching recessed panel span is required in a Glenwood layout.
Sold In: 1 Each