Kitchen Kompact Glenwood valance identifies this piece as part of the Glenwood cabinet line, so it visually matches other Glenwood components when finishing a run of wall cabinets. The 72 inch width, 5-1/2 inch height, and 3/4 inch thickness define the span and proportion, which helps plan straight, continuous light or decorative reveals across wider cabinet layouts. The recessed panel design in the Glenwood style establishes a defined center field and surrounding frame, giving a consistent frame-and-panel look that aligns with matching Glenwood doors and fronts in a project. The solid 3/4 inch wood construction used throughout Glenwood framing supports a substantial edge profile, which helps the valance hold its shape along its full length in normal kitchen cabinet environments. As part of the Kitchen Kompact cabinet family, this valance integrates into installations using other Kitchen Kompact Glenwood components.
The 72 inch width of this Glenwood valance sets it up for wider cabinet sections, providing a single continuous piece that spans multiple wall cabinets where that length is required. Its 5-1/2 inch height defines how much space appears between the cabinet bottoms and the line it creates, which matters when coordinating with under-cabinet lighting or sightlines. The 3/4 inch thickness matches the solid framing thickness used elsewhere in the Glenwood line, so adjacent rails and stiles meet with a flush, consistent look. Because the frames are built of solid oak, maple, or beech, the edge profile of the valance can align with cabinet frames using the same woods in a Glenwood installation. Mortise and tenon rail joints, glued for added strength, help the valance remain straight as it is fixed at both ends between cabinets.
The GW72VAL Glenwood valance is sized at 72 inches wide, so it fits applications where a long, uninterrupted span is preferred across several wall cabinets in a Kitchen Kompact Glenwood layout. Its 5-1/2 inch height locates the lower edge at a predictable line below the cabinet frames, which supports consistent reveals when repeating the same dimension in multiple sections of a kitchen. Because the frames in this product family are built of solid 3/4 inch oak, maple, or beech, the valance edge presents the same solid material as matching cabinet frames, allowing it to visually tie together face frames, toe kicks, and end panels around it. The recessed panel profile uses that solid framing to form a defined border, so the valance serves as a visual continuation of Glenwood frame-and-panel styling beneath or between cabinets.
The kiln-dried rails with mortise and tenon joints, glued for added strength, give the GW72VAL Glenwood valance a rigid structure that helps maintain straight alignment from one cabinet to the next after fastening. Solid wood corner blocks that are glued and power nailed reinforce the frame corners, so the valance resists twisting as it is drawn tight to adjoining cabinets. The 3/4 inch solid wood thickness matches other Kitchen Kompact Glenwood framing components, reducing step transitions where frames meet along the run. Solid wood hanging strips on wall and base cabinets, located at the top and bottom, form dependable anchoring points for the main cabinet boxes, which allows the face components, including this recessed panel valance, to register against cabinets that stay square under normal load. End panels with 3-ply, 1/2 inch engineered wood cores and hardwood veneers provide stable neighboring surfaces, helping the long valance sit flat and maintain an even reveal.
The GW72VAL Glenwood valance is 72 inches wide, 5-1/2 inches high, and 3/4 inch thick, which defines the span, visual drop, and edge thickness in a Glenwood cabinet run.
The Glenwood recessed panel valance uses a framed center panel that echoes Glenwood doors and fronts, so the line under or between cabinets matches the cabinet style.
All frames in this product line are built of solid 3/4 inch oak, maple, or beech, giving the Glenwood valance a solid wood frame that aligns with matching cabinet components.
Each rail is kiln-dried, joined by mortise and tenon, and glued for added strength, so the valance frame stays tight and straight when fixed across multiple cabinets.
Solid wood corner blocks are glued and power nailed, tying the frame together so the valance resists racking when drawn into position between cabinets.
The GW72VAL Glenwood valance is part of the Kitchen Kompact Glenwood line, so its style and solid wood framing coordinate with Glenwood wall, base, and end components.
The GW72VAL Kitchen Kompact Glenwood valance combines a 72 inch span, 5-1/2 inch height, and 3/4 inch solid wood framing to match Glenwood cabinet styling in extended runs. Kiln-dried, mortise and tenon rails, solid wood corner blocks, and coordinated Glenwood construction details support a straight, stable frame that aligns with wall and base cabinets using the same system. For Glenwood installations needing a long recessed panel valance that carries the cabinet face style across a wider opening, this Kitchen Kompact component provides a matched solution ready to integrate into that layout.
Sold In: 1 Each