Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Kitchen Kompact Warmwood wall corner cabinet WW24WC is a 24 inch wide, 30 inch high, 12 inch deep wall corner cabinet built for standard kitchen layouts where a recessed panel style is needed. The maple flat panel doors give a warm, straightforward appearance that pairs with other Kitchen Kompact Warmwood cabinets, so a run of wall units looks consistent across the room. The door frames use mortised and tenoned construction in solid 3/4 inch maple, which locks the joints together mechanically for a rigid door that resists racking on its hinges during everyday opening and closing. A flat panel plywood insert with a three-ply construction and rotary cut hard maple veneer face fills the door frame, providing a stable center panel with a maple appearance that works well in typical kitchen environments. Solid wood corner blocks are glued and power nailed into the cabinet, tying the sides together for added structural strength when the cabinet is loaded in a corner run.
This Kitchen Kompact 24 x 30 wall cabinet measures 24 inches wide, 30 inches high, and 12 inches deep, giving it the proportions used on standard upper cabinet lines while fitting a corner position. The depth allows it to sit in line with typical 12 inch deep wall cabinets, which helps a run of uppers meet cleanly at the corner. Solid wood hanging strips at the top and bottom of the back panel provide continuous mounting members, so fasteners can pass through solid stock into wall structure along the full length of the cabinet. The WW24WC wall corner cabinet uses maple flat panel doors, so the face integrates visually with other Warmwood units when aligned along the wall. The concealed, self-closing hinges are set up on these doors, supporting repeatable door swing and closing action once the unit is mounted.
The Warmwood 24WC wall corner cabinet is sized at 24 inches wide to occupy a typical upper corner position in a kitchen, so it can tie two walls of cabinets together at a right angle. With a 30 inch height, it matches common wall cabinet heights, helping installers maintain a continuous top line when this unit is combined with adjacent Warmwood uppers. The 12 inch depth allows the front face to stay flush with surrounding wall cabinets, which simplifies alignment of doors and trim along the run. Maple flat panel doors on this corner unit mirror the look of other maple flat panel doors in the Warmwood series, so door styles stay consistent as the layout turns the corner. The rotary cut hard maple veneer on the door panels supports a continuous Warmwood appearance, which matters when this cabinet sits at eye level in a corner where two runs meet.
The solid 3/4 inch maple door frames on this Kitchen Kompact wall corner cabinet use mortised and tenoned joints, creating mechanical engagement between rails and stiles that supports square, stable doors during hinge adjustment and daily operation. Solid wood corner blocks, glued and power nailed, brace the cabinet box so it remains square while being handled, lifted, and fastened to the wall, which helps doors fit the opening evenly. Solid wood hanging strips at the top and bottom of the cabinet give installers defined fastening zones along the cabinet width, making it easier to place fasteners into structural backing while keeping the case aligned. The four step finishing process - stain, sealer, sanding, and catalyzed top coat - produces a uniform Warmwood finish over both solid maple and veneer surfaces, so the appearance stays consistent across doors and face areas under normal kitchen conditions. Adjustable shelves allow the interior to be configured around typical corner storage needs, using the same cabinet shell while supporting different contents.
The Kitchen Kompact Warmwood wall corner cabinet measures 24 inches wide, 30 inches high, and 12 inches deep, so it matches standard wall cabinet depth and height in many kitchen layouts.
The Warmwood 24WC cabinet doors use solid 3/4 inch maple frames with mortised and tenoned construction and a flat panel plywood insert, providing a rigid frame and stable maple-faced center panel.
The WW24WC wall corner cabinet uses concealed, self-closing hinges, so the hardware is hidden when doors are shut and the doors are pulled closed at the end of the swing.
The Kitchen Kompact Warmwood cabinet uses a four step process of stain, sealer, sanding, and catalyzed top coat, giving the maple and veneer surfaces a consistent Warmwood finish.
The Warmwood wall corner cabinet uses solid wood corner blocks that are glued and power nailed, along with solid wood hanging strips, to reinforce the cabinet case and mounting areas.
The WW24WC cabinet uses adjustable shelves, so interior shelf positions can be changed to accommodate different sizes of stored items in the corner space.
The Kitchen Kompact Warmwood wall corner cabinet WW24WC combines a 24 inch width, 30 inch height, and 12 inch depth with mortised and tenoned solid maple door frames, a rotary cut hard maple veneer panel, and a four step catalyzed finish. Solid wood corner blocks and hanging strips support a strong cabinet case for wall mounting in a corner run. When a layout calls for a Warmwood recessed panel wall corner, this unit provides matching maple flat panel doors, concealed self-closing hinges, and adjustable shelves, giving installers and serious DIY buyers a defined option for tying upper cabinets together at the corner.
Sold In: 1 Each