Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Kitchen Kompact Warmwood wall corner cabinet is a 42 inch wide, 30 inch high, 12 inch deep wall corner unit designed to create usable storage in a corner run. The cabinet uses maple flat panel doors, so the visible faces match a maple kitchen layout while keeping the profile clean for typical residential jobs. Door frames are mortised and tenoned construction of solid three-quarter inch maple, which ties the corners of each door together for a rigid frame that resists racking during daily use. Solid wood corner blocks are glued and power nailed, giving the cabinet case reinforced corners that stay tight when the unit is hung on the wall. Solid wood hanging strips located on the top and bottom add continuous attachment points along the back of the cabinet, which supports secure mounting across wall studs in a kitchen installation.
This Kitchen Kompact wall corner cabinet uses solid wood hanging strips located on the top and bottom, which give two continuous bands of solid wood at the back of the case for firm contact with wall framing during mounting. The 42 inch width and 30 inch height dimension allow the unit to align with standard wall cabinet heights in many kitchen layouts, so the corner transitions cleanly into adjacent wall runs. Solid wood corner blocks are glued and power nailed at the cabinet corners, which stabilizes the box during handling, lifting, and fastening to the wall. Maple flat panel doors finished in the Warmwood process complete the front, so once mounted the cabinet presents a consistent face with other Kitchen Kompact Warmwood wall units.
The Warmwood 42WC wall corner cabinet is designed as a wall corner unit at 42 inches wide, 30 inches high, and 12 inches deep, which places it in the upper corner position of a kitchen where two wall runs meet. Mortised and tenoned construction of solid three-quarter inch maple is used for the door frames, so when the doors are opened and closed along that corner, the frame joints stay tight and square under regular use. A flat panel plywood insert with a three-ply panel and rotary cut hard maple veneer face fills each door opening, giving a maple veneer that visually ties into other Warmwood maple fronts while keeping the center panel dimensionally stable. Solid wood corner blocks that are glued and power nailed sit inside the case, backing up the corner joints so the cabinet box remains square as it is positioned and leveled in the corner zone of the wall. Solid wood hanging strips on the top and bottom give the back of the cabinet continuous solid material for fastening across available studs at both the upper and lower edges of the cabinet, which is especially useful when spanning a corner where framing can vary.
The four step process of stain, sealer, sanding and catalyzed top coat applied to this Kitchen Kompact maple wall cabinet gives the Warmwood finish a layered coating, so the maple faces are sealed, leveled, and then protected with a catalyzed top coat that stands up to normal kitchen humidity and handling. Maple flat panel doors on this wall corner cabinet use solid maple frames around the plywood insert, so the outer edges carry the strength of solid wood while the center panel manages movement in changing indoor conditions. Adjustable shelves inside the cabinet let the installer set shelf height to suit cookware, pantry items, or small appliances, making the interior volume of the 12 inch deep cabinet more usable across different kitchen layouts. Concealed, self-closing hinges are used on the maple flat panel doors, so hinge hardware stays out of sight when doors are shut and the self-closing function pulls the doors to a closed position, which helps the doors sit flush and maintain an orderly appearance along the wall run. Solid wood corner blocks and solid wood hanging strips together support the cabinet structure as it carries the load of stored contents over time in the corner position.
The Kitchen Kompact Warmwood 42WC wall corner cabinet measures 42 inches wide, 30 inches high, and 12 inches deep, which lets it tie into standard-height wall cabinet runs in many kitchen layouts.
The door frames are mortised and tenoned construction of solid three-quarter inch maple, creating strong joints at each corner so the doors stay square and operate smoothly in everyday kitchen use.
This Warmwood wall corner cabinet uses solid wood corner blocks that are glued and power nailed, giving extra strength at the case corners so the box remains rigid during mounting and long-term use.
The Warmwood wall corner cabinet uses adjustable shelves, so shelf positions can be set to match the height of stored kitchen items, making the interior more flexible for different storage needs.
The cabinet fronts go through a four step process of stain, sealer, sanding and catalyzed top coat, producing a Warmwood finish that protects the maple surfaces while presenting a consistent color and sheen.
The maple flat panel doors on this Kitchen Kompact wall corner cabinet use concealed, self-closing hinges, which hide the hinge hardware and pull the doors closed for a clean, aligned front.
The Kitchen Kompact Warmwood wall corner cabinet WW42WC combines a 42 inch wide, 30 inch high, 12 inch deep wall format with solid maple door frames and a maple veneer flat panel insert, aligning it with typical Warmwood maple kitchens. Mortised and tenoned door construction, solid wood corner blocks, and solid wood hanging strips provide a robust structure that supports daily use in a corner position. Adjustable shelves and concealed, self-closing hinges give practical interior flexibility and clean door operation, fitting the needs of professional installers and serious DIY buyers building a Warmwood Kitchen Kompact run.
Sold In: 1 Each