Kitchen Kompact Warmwood wall corner cabinet is a 36 inch wide, 30 inch high, 12 inch deep wall corner unit designed to use corner wall space in a kitchen run. Door frames are mortised and tenoned construction of solid 3/4 inch maple, creating a rigid frame that holds alignment over time. The flat panel plywood insert is a three-ply panel with a rotary cut hard maple veneer face, so the visible panel carries a maple look while keeping weight reasonable. Maple flat panel doors present a consistent door style that matches other pieces in the Kitchen Kompact line. Solid wood corner blocks are glued and power nailed, tying cabinet corners together so the box stays square during hanging and over years of door use. Solid wood hanging strips located on the top and bottom give a continuous solid mounting surface along the wall, helping spread hanging loads.
This Warmwood 36 inch wall corner cabinet uses solid wood hanging strips located on the top and bottom, giving two substantial mounting rails to work against wall studs for cabinet hanging. Door frames are mortised and tenoned construction of solid 3/4 inch maple, so hinge loads transfer into solid joints that help doors stay aligned after mounting. Solid wood corner blocks are glued and power nailed, holding the cabinet box square as it is lifted, clamped, and fastened on the wall. The flat panel plywood insert with rotary cut hard maple veneer face keeps panel weight moderate while presenting a consistent face once the unit is hung at height. Adjustable shelves inside the cabinet let installed shelf positions match stored items, reducing the need to remount cabinets to change interior clearances.
The Kitchen Kompact 36 inch wide, 30 inch high, 12 inch deep Warmwood wall corner unit is sized for use in upper kitchen corners to transition between two wall runs. Solid wood hanging strips located on the top and bottom allow the cabinet to be fastened into framing at both rails, tying it structurally into adjacent wall cabinets. Door frames are mortised and tenoned construction of solid 3/4 inch maple, matching other maple-framed units in a Kitchen Kompact layout for a continuous look. The flat panel plywood insert with a rotary cut hard maple veneer face gives the visible door panel a maple face that coordinates with other Warmwood pieces. Maple flat panel doors present a consistent recessed panel style, so this wall corner can visually align with neighboring doors along the run.
The solid wood corner blocks that are glued and power nailed create firm interior bracing, which helps the wall corner cabinet resist racking when fastened to the wall and connected to adjoining cabinets. Solid wood hanging strips located on the top and bottom spread hanging forces along the width of the cabinet, supporting door operation and shelf loads without concentrating stress in a small area. Door frames using mortised and tenoned construction of solid 3/4 inch maple handle the repeated pulling and closing forces at the hinges, helping doors stay square in the opening. The flat panel plywood insert with its three-ply construction and rotary cut hard maple veneer face provides a stable panel that limits movement while keeping the maple appearance consistent under the 4 step process of stain, sealer, sanding and catalyzed top coat. Adjustable shelves let shelf spacing be set to stored items, using the cabinet volume efficiently without changing the exterior alignment within the kitchen run.
The Kitchen Kompact Warmwood wall corner cabinet is 36 inches wide, 30 inches high, and 12 inches deep, sizing it for upper kitchen corner installations.
The cabinet uses door frames that are mortised and tenoned construction of solid 3/4 inch maple, giving jointed solid wood frames suited to repeated hinge loading.
Solid wood corner blocks are glued and power nailed, bracing the junctions of sides, top, and bottom so the cabinet box stays square in service.
The door uses a flat panel plywood insert that is a three-ply panel with a rotary cut hard maple veneer face, providing a stable maple-faced center panel.
Solid wood hanging strips located on the top and bottom give two structural mounting rails that accept fasteners into wall framing.
The cabinet uses concealed, self-closing hinges, keeping hardware hidden while pulling the doors shut for a clean front appearance.
The Kitchen Kompact 36 inch Warmwood wall corner cabinet brings mortised and tenoned solid 3/4 inch maple door frames, solid wood corner blocks, and solid wood hanging strips into a single unit sized for upper corner placement. The flat panel plywood insert with rotary cut hard maple veneer face and maple flat panel doors present a coordinated Warmwood look across a Kitchen Kompact layout. Adjustable shelves and concealed, self-closing hinges support flexible interior storage and smooth door motion. For projects calling for a Warmwood corner solution within the Kitchen Kompact line, this WW36WC model provides the construction details and dimensions needed to integrate into a typical upper cabinet run.
Sold In: 1 Each