Kitchen Kompact Glenwood wall cabinet in the GW12WXT model provides a 12 inch wide, 42 inch high, 12 inch deep upper cabinet that fits tall wall layouts and narrow spaces. This Glenwood cabinet uses a recessed panel design, giving a clean front profile that lines up well with other Kitchen Kompact pieces on a run. The cabinet is built within the Kitchen Kompact product class, so it aligns with the brand's typical kitchen cabinet applications where consistent sizing and appearance matter. The product uses a GLENWOOD 12WXT configuration, which identifies it as a tall wall unit in the Glenwood series for designers and installers matching layout plans. This Kitchen Kompact cabinet is intended as part of a kitchen system, so its dimensions and face style work in standard kitchen wall cabinet rows and corner transitions.
This Kitchen Kompact wall cabinet uses solid wood hanging strips at the top and bottom of the wall configuration, which concentrates strength where fasteners are typically driven and supports the weight of the loaded cabinet. The 12 inch depth matches standard upper cabinet projections, so it aligns with typical appliance clearances and counter layouts. At 42 inches high, the GW12WXT format reaches higher on the wall than shorter units, which influences how rows of cabinets step around windows or hoods. The solid 3/4 inch frame around the recessed panel creates a firm reference for door positioning and adjacent cabinet scribing, supporting a straight visual line across multiple wall units.
The GW12WXT Glenwood 12WXT cabinet, sized at 12 inches wide, works in narrow wall sections where full-width units will not fit, such as next to vents, windows, or tall appliances. Its 42 inch height suits layouts that run wall cabinets closer to the ceiling, creating additional vertical storage while keeping a continuous top line with other 42 inch Kitchen Kompact wall units. The 12 inch depth positions the cabinet front in the standard upper cabinet plane, which keeps sightlines consistent above countertops or work areas. Because the cabinet belongs to the Kitchen Kompact Glenwood series, the recessed panel style coordinates with other Glenwood pieces in the same room, helping installers lay out corners, fillers, and transitions without mixing profiles. The engineered wood core end panels with hardwood veneers allow visible cabinet sides to present a hardwood look, which matters when ends are exposed at a run termination or against an open space.
Solid 3/4 inch oak, maple, or beech frames provide substantial fastening edges for hinges and alignment, supporting door adjustment and helping the opening stay true after installation. Kiln-dried mortise and tenon rails that are glued for added strength resist seasonal movement at the joints, which supports long-term fit where doors, fillers, or trim meet the frame. Glued and power nailed solid wood corner blocks tie the cabinet box together, so the cabinet body resists flexing when lifted into position or when rows are clamped during wall mounting. The 3-ply, 1/2 inch thick engineered wood core end panels with hardwood veneers balance strength and stability, which helps keep the cabinet sides flat against walls or adjacent cabinets while still presenting a hardwood veneer for finishing. Solid wood hanging strips located at the top and bottom of this wall cabinet define strong fastening zones, helping installers spread fasteners across the cabinet height for load distribution when the cabinet is loaded with typical kitchen contents.
The GW12WXT Glenwood wall cabinet is 12 inches wide, 42 inches high, and 12 inches deep, which fits tall, narrow wall sections in standard kitchen layouts.
The Kitchen Kompact cabinet frame is built of solid 3/4 inch oak, maple, or beech, providing a sturdy face frame that supports doors and helps maintain alignment.
The frame rails are kiln-dried, joined by mortise and tenon, and glued, creating strong joints that help the cabinet stay square after installation and during use.
The Glenwood wall cabinet uses solid wood corner blocks that are glued and power nailed, tying the corners together to reduce twisting and flex during handling.
Kitchen Kompact wall cabinets use solid wood hanging strips at the top and bottom, providing strong areas for mounting fasteners when attaching the cabinet to wall framing.
The end panels have 3-ply construction with a 1/2 inch engineered wood core and hardwood veneers, offering dimensional stability with a hardwood-faced surface.
The Kitchen Kompact Glenwood wall cabinet in the GW12WXT size pairs a 12 inch width with a 42 inch height and 12 inch depth, giving planners a tall, narrow unit for tight wall sections. Its solid 3/4 inch oak, maple, or beech frame, mortise and tenon rails, and glued, power nailed solid wood corner blocks work together to create a rigid cabinet box that holds alignment in service. Solid wood hanging strips at the top and bottom give defined mounting zones that support a secure wall installation. For projects using the Glenwood recessed panel style and Kitchen Kompact product class, this GW12WXT cabinet provides a matching option that fits tall wall runs and coordinates visually with the rest of the line.
Sold In: 1 Each