Kitchen Kompact Glenwood wall cabinet is a 33 inch wide, 42 inch high, 12 inch deep wall cabinet built for kitchen runs that need consistent sizing and dependable structure. The cabinet uses a frame built of solid 3/4 inch oak, maple, or beech, which provides a sturdy front frame for fastening doors and aligning adjoining cabinets during layout. Each rail is kiln-dried, then joined by mortise and tenon and glued, so the frame resists twisting or loosening as it is fastened to wall studs and tied into neighboring units. Solid wood corner blocks are both glued and power nailed, tying cabinet sides to the frame so the box stays square under load. The design uses 3/4 inch thick solid wood toe kicks and solid wood hanging strips, so wall and base cabinets share the same structural approach across the Glenwood line.
This 33 inch wide by 42 inch high by 12 inch deep Kitchen Kompact wall cabinet is designed around solid wood hanging strips at both the top and bottom, giving two continuous fastening lines for tying into wall framing. The solid 3/4 inch frame of oak, maple, or beech provides a strong face to clamp against adjacent units, helping pull seams tight during installation. Kiln-dried rails joined with mortise and tenon and glue keep the front frame square while screws are driven through the hanging strips into studs. Solid wood corner blocks that are glued and power nailed tie the frame to the cabinet sides, so the box stays aligned as it is hoisted, leveled, and joined in a run.
The Glenwood 33WXT wall cabinet, at 33 inches wide, 42 inches high, and 12 inches deep, fits upper cabinet runs that call for a taller wall cabinet profile. The solid wood hanging strips on this wall cabinet are located at the top and bottom, so it is suited to standard stud-wall construction where installers fasten at multiple heights to lock in plumb and level. The frame built of solid 3/4 inch oak, maple, or beech supports doors and face alignment, which matters when this cabinet sits between other Glenwood units in a straight run. End panels built with 3-ply construction and a 1/2 inch thick engineered wood core with hardwood veneers give the sides dimensional stability, which helps when this cabinet forms an exposed end in a layout.
The kiln-dried rails joined by mortise and tenon and then glued create a front frame that stays square as screws are driven, which supports repeatable joint lines between cabinets on multiple jobs. Solid wood corner blocks that are glued and power nailed lock the frame to the cabinet box, so repeated lifting and minor adjustments during install do not easily rack the case. Solid wood hanging strips on wall and base cabinets, located at the top and bottom, give predictable fastening points that simplify layout marks and drilling routines across projects. The 3-ply end panels with a 1/2 inch thick engineered wood core and hardwood veneers balance strength and stability, reducing movement at the sides that could otherwise open up seams between units. The use of solid 3/4 inch material in the frame also provides a consistent substrate for fastening hinges, helping maintain hardware performance over time.
The Kitchen Kompact Glenwood 33WXT wall cabinet measures 33 inches wide, 42 inches high, and 12 inches deep, so it matches layouts that call for a tall upper cabinet with a 12 inch depth.
The Glenwood wall cabinet frame is built of solid 3/4 inch oak, maple, or beech with kiln-dried rails joined by mortise and tenon and glue, providing a rigid, square front for mounting doors and aligning cabinets.
The solid wood hanging strips on wall and base cabinets, located at the top and bottom, create strong fastening zones that help installers anchor the cabinet securely into wall framing.
The end panels use 3-ply construction with a 1/2 inch thick engineered wood core and hardwood veneers, giving the sides stability that helps keep seams between cabinets tight over time.
The solid wood corner blocks are glued and power nailed, tying the frame to the sides so the cabinet box stays square during handling, lifting, and fastening in a run.
The solid wood toe kicks are 3/4 inch thick, giving base cabinets in the same Kitchen Kompact line a sturdy lower section that aligns visually and structurally with this wall cabinet.
The Kitchen Kompact Glenwood wall cabinet GW33WXT pairs a solid 3/4 inch oak, maple, or beech frame with kiln-dried, mortise-and-tenon-joined rails, giving you a rigid front for aligned doors and clean joints. Solid wood hanging strips at the top and bottom, along with glued and power-nailed corner blocks, support confident stud fastening and handling during install. For upper runs needing a 33 inch wide, 42 inch high, 12 inch deep cabinet built on this construction, this Glenwood wall cabinet matches that requirement.
Sold In: 1 Each