Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Kitchen Kompact Glenwood wall cabinet 24"W x 42"H x 12"D provides a tall upper storage option that matches standard kitchen depths, so it lines up cleanly with typical wall layouts and keeps wall runs consistent. The Glenwood recessed panel design defines the door style, giving a framed look that matches other Glenwood cabinets for a unified run. The solid 3/4" oak, maple, or beech frame forms the structural backbone of the cabinet, so the doors hang on solid material that holds up under repeated use. Solid wood toe kicks and solid wood corner blocks are part of the construction approach, tying the box together with solid components that support the cabinet structure. Solid wood hanging strips on wall cabinets are positioned at the top and bottom, creating a dedicated mounting area that matches common wall stud locations and helps keep the cabinet stable once fastened.
Kitchen Kompact wall cabinets use solid wood hanging strips at the top and bottom, so the installer has continuous solid material to bite into when fastening to wall framing. Having both top and bottom strips creates two mounting lines, which helps support the cabinet along its full height instead of at a single point. The 12" depth of this 24"W x 42"H cabinet aligns with typical wall cabinet dimensions, so depth is predictable when planning fastener length into framing. The overall framed construction ties those hanging strips into the sides and face frame, allowing the load from dishes and contents to transfer into the frame and corner blocks rather than stressing a thin back alone.
The 24" width of this Glenwood 24WXT wall cabinet fits common layout increments, which helps when planning upper runs over base cabinets or appliances. The 42" height creates a tall wall cabinet option, allowing more vertical storage above counters in kitchens that use higher uppers. The recessed panel Glenwood design means this unit visually matches other Glenwood cabinets, so the 24" wide cabinet can be mixed with other widths while keeping the same front profile. Solid wood corner blocks and toe kicks are part of the construction approach, tying this unit into the same build philosophy as matching base cabinets and supporting a consistent structural feel across the room. The 3/4" solid wood frames and 3-ply end panels carry the same material story from one cabinet to the next, helping runs look and perform as a coordinated group.
The 3/4" solid oak, maple, or beech frame on this GW24WXT Kitchen Kompact cabinet gives a true reference surface for aligning adjacent cabinets, so face frames can be drawn together cleanly when forming a bank. Mortise and tenon joints at the frame intersections hold those reference points square, which helps doors line up and reduces time spent tweaking reveals. Kiln-dried rails reduce the risk of later twisting, so the frame built in the shop behaves predictably once on the wall. The end panels with 3-ply construction and a 1/2" engineered wood core add dimensional stability at the sides, which helps mounting screws hold tension without crushing soft material. Solid wood hanging strips at both top and bottom tie directly into the cabinet structure, so when the cabinet is fastened through those strips into framing, the load transfers into the whole box rather than flexing a thin back panel. Solid wood corner blocks that are glued and power nailed further lock the sides, top, and bottom together, helping the cabinet stay square after tightening clamps and fasteners during installation.
The Kitchen Kompact Glenwood wall cabinet measures 24 inches wide, 42 inches high, and 12 inches deep, which fits common upper cabinet planning dimensions.
The cabinet frame is built of solid 3/4 inch oak, maple, or beech, giving a hardwood face frame that supports hinges and helps maintain door alignment.
Each frame rail uses a mortise and tenon joint and is glued, creating a mechanically locked corner that resists racking during use.
End panels use 3-ply construction with a 1/2 inch engineered wood core and hardwood veneers, giving stable sides with a hardwood appearance.
The cabinet uses solid wood hanging strips at the top and bottom of wall cabinets, providing solid mounting areas for fastening to framing.
The cabinet uses solid wood corner blocks that are glued and power nailed, tying the box together and supporting overall structural rigidity.
The GW24WXT Kitchen Kompact cabinet combines a 24"W x 42"H x 12"D format with a solid 3/4" hardwood frame, kiln-dried rails, and mortise and tenon joints, so it suits projects that call for framed construction. Solid wood hanging strips, corner blocks, and 3-ply end panels give this Glenwood recessed panel wall cabinet a defined structure for building consistent upper runs. Use this unit where a 24-inch-wide, tall Glenwood wall cabinet fits the layout and a solid frame construction is the preferred approach.
Sold In: 1 Each