Kitchen Kompact replacement door identifies this piece as a dedicated door for the Kitchen Kompact cabinet line, which matters when matching existing runs in a kitchen or shop layout where consistent appearance is required. The product name specifies a 12-1/2 inch wide by 18 inch high door, so installers can align this door with existing openings that have been laid out to those dimensions. The recessed panel design described in the product name defines the panel profile, helping match the visual style of other Kitchen Kompact fronts on the job. The DWhite reference in the description identifies the color family, which helps it integrate visually with Kitchen Kompact DWhite cabinets already installed in a space.
The product name calls out a 12-1/2 inch width and 18 inch height, so cabinet builders and installers can lay out their openings and hinge placement around those dimensions when planning a cabinet run. The association with Kitchen Kompact cabinets and the DWhite designation ties this door to a known cabinet system, which helps align it with matching cabinet boxes built with solid wood frames, solid wood hanging strips, and engineered end panels described in the web description. The frame construction in solid 3/4 inch oak, maple, or beech provides a substantial edge for hinge mounting, which is important when doors are opened and closed repeatedly in busy kitchen or work areas.
The manufacturer part number DW18X12 identifies this piece as a specific 18 inch by 12-1/2 inch door within the Kitchen Kompact line, which helps installers match it to cabinet openings set up for that size. The DWhite wording in the description ties the finish tone to DWhite Kitchen Kompact cabinets, so this door visually lines up with existing cabinet fronts in that color family. The recessed panel design specified in the product name suits projects built around that style, helping maintain a consistent look across base and wall units that share the same profile. Because all frames are built of solid 3/4 inch oak, maple, or beech, the door works well wherever a solid-wood frame is preferred in a Kitchen Kompact installation.
The description states that each rail is kiln-dried, which supports dimensional stability when the door is installed in kitchens or workspaces subject to moisture and temperature changes, reducing movement that can affect reveals. Mortise and tenon joints that are glued add an interlocking mechanical connection, which distributes stress across the frame and helps the door stay square after repeated opening cycles. Solid wood corner blocks that are glued and power nailed strengthen key stress points in the cabinet structure behind this door, which helps keep the cabinet box aligned so the door closes consistently. Solid wood toe kicks at 3/4 inch thickness create a firm base, helping maintain door alignment relative to the floor line on long runs. Solid wood hanging strips at the top and bottom of wall and base cabinets give defined mounting zones that carry the load of this door into the cabinet structure. The end panels with 3-ply construction, a 1/2 inch engineered wood core, and hardwood veneers provide stable cabinet sides that help maintain hinge alignment and keep gaps consistent over time.
The DW18X12 door is identified in the product name as 12-1/2 inches wide by 18 inches high, helping installers match it to the correct cabinet opening size in a Kitchen Kompact layout.
The web description states that all frames are built of solid 3/4 inch oak, maple, or beech, providing a solid-wood frame suited to hinge mounting and regular cabinet use.
The rails are described as joined by mortise and tenon and then glued, creating a strong interlocking frame that supports long-term use without the joints loosening easily.
The SAP description uses DWHITE, indicating this door is intended for DWhite Kitchen Kompact cabinets, which matters when matching finish and appearance in an existing installation.
The web description notes solid wood hanging strips at the top and bottom of wall and base cabinets, giving defined, sturdy mounting areas that support the weight and motion of this door.
The end panels use 3-ply construction with a 1/2 inch engineered wood core and hardwood veneers, providing stable cabinet sides that help keep this door aligned over time.
This Kitchen Kompact replacement door is identified as 12-1/2 inches wide and 18 inches high, giving installers clear dimensions for planning cabinet openings and hinge locations. The recessed panel style and DWhite designation align this door with DWhite Kitchen Kompact cabinets, supporting visual consistency across a full run. Solid 3/4 inch oak, maple, or beech frame construction, mortise and tenon joints, and solid wood corner blocks described in the web description support long-term cabinet performance where this door is used.
Sold In: 1 Each