Kitchen Kompact replacement door identifies this part as a factory-style match for Kitchen Kompact cabinetry, so it suits jobs where a damaged DWhite door needs to be replaced while keeping a consistent look. The door uses a recessed panel style, which creates a defined frame around the center panel and aligns with typical Kitchen Kompact design. The solid door frame is designed to work with standard kitchen cabinet layouts, which helps maintain uniform reveals when swapping out a single front. The specified 15-1/2 inch width by 18 inch height sizes the face accurately for openings that were originally built for this DW18X15 front, so the installer can hang the door in the existing run without redesigning the cabinet face. The DWhite description ties to the manufacturer color line, helping match this door to other DWhite components on the same wall or base run.
The manufacturer part number DW18X15 specifies this DWhite door at 18 inches high by 15-1/2 inches wide, which sets the overall face size for aligning with existing Kitchen Kompact cabinet frames. This defined sizing keeps the stiles and rails in proportion to neighboring doors, supporting even gaps once hinges are mounted. The solid 3/4 inch frame around the recessed panel gives hinge screws material depth to bite into on the cabinet door edge, which helps the door hold position over time. Because the frame is kiln-dried oak, maple, or beech, the door is built to stay relatively true on the cabinet front in normal kitchen conditions, supporting repeatable alignment after adjustment.
The Kitchen Kompact 15-1/2 inch wide by 18 inch high DWhite replacement door is sized for cabinet layouts originally designed around the DW18X15 front, so it fits into runs using that face dimension. In a kitchen using the Kitchen Kompact line, this recessed panel DWhite door matches the style and color family described for other DWhite components, supporting visual continuity across wall and base cabinets. The solid 3/4 inch oak, maple, or beech frame allows the door to function as the working face on an active storage cabinet, such as upper wall units or smaller base cabinets, where the frame must tolerate repeated openings. When paired with cabinets built with the same solid wood hanging strips and 3-ply end panels with engineered wood core and hardwood veneers, the door ties into a system built around wood-based construction, which is useful in remodels that extend an existing Kitchen Kompact installation.
The way each rail is kiln-dried before assembly prepares the wood for service on a hinged door, which supports consistent reveals because the frame is less likely to twist after hanging. Mortise and tenon rail joints that are glued add strength at the corners of the door frame, so installers can adjust hinge tension without the frame loosening at the joints. Solid wood corner blocks that are glued and power nailed work with the overall cabinet build, giving the box rigidity so the DW18X15 door closes against a stable front rather than a flexing case. The 3/4 inch solid wood toe kicks under base cabinets provide a firm base, which helps doors in the same run keep their alignment over time. Solid wood hanging strips at the top and bottom of wall and base cabinets give the installer reliable structure to fasten through, which supports accurate positioning of the cabinet box and helps this replacement door sit correctly in relation to other fronts.
The DW18X15 DWhite door is described as 18 inches high by 15-1/2 inches wide, which defines the face size needed to align with existing Kitchen Kompact cabinet openings.
The door frame is built of solid 3/4 inch oak, maple, or beech, giving hinge and handle locations solid wood for fasteners and helping the door tolerate repeated use.
Each rail is kiln-dried, joined by mortise and tenon, and then glued, creating a stable frame so the door stays square on the cabinet and maintains even gaps.
The DWhite description identifies this door as part of the DWhite line, helping match its appearance with other DWhite Kitchen Kompact cabinet components in the same project.
Solid wood hanging strips on wall and base cabinets, located at the top and bottom, provide strong mounting points so the cabinet sits securely and the door can align with adjacent fronts.
End panels consist of 3-ply construction with a 1/2 inch engineered wood core and hardwood veneers, giving the cabinet box a stable side so the door closes against a firm surface.
The Kitchen Kompact 15-1/2 inch wide by 18 inch high DWhite replacement door with recessed panel design gives installers a part sized to match DW18X15 openings. The solid 3/4 inch oak, maple, or beech frame, kiln-dried and mortise-and-tenon joined, supports daily hinge use on active kitchen cabinets. In cabinet runs built with solid wood toe kicks, corner blocks, and hanging strips, this door integrates into a sturdy wood-based system, helping maintain alignment across the run when replacing a single front or extending an existing Kitchen Kompact installation.
Sold In: 1 Each