
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Kitchen Kompact replacement door identifies this 15-1/2 inch wide by 27 inch high recessed panel door as a direct match to Kitchen Kompact DWhite cabinet runs, so you can swap a damaged door while keeping the original style consistent across the line. The DWhite designation ties the finish and design back to the SAP description, which keeps ordering aligned with existing Kitchen Kompact installations. The recessed panel layout supports the framed construction approach used across the Kitchen Kompact cabinet program, helping maintain the same visual profile when you replace doors on a bank of wall or base units. The manufacturer part number DW27X15 gives you a precise size and pattern reference, which matters when you are replacing a single front without disturbing surrounding cabinets in an existing kitchen.
The 15-1/2 inch width and 27 inch height on this DWhite recessed panel door give you fixed proportions that match the DW27X15 part number, which is important when lining up reveals on existing Kitchen Kompact cabinets. The solid 3/4 inch hardwood frame construction from oak, maple or beech means hinge mounting lands on solid stock around the perimeter, which supports clean screw bite and long-term hinge stability. The framed recessed panel style follows the same construction logic as the rest of the Kitchen Kompact line, so this door fits visually and structurally into installations built with matching frames, end panels, toe kicks, hanging strips, and corner blocks.
This Kitchen Kompact cabinet door is sized at 27 inches high by 15-1/2 inches wide, which positions it for use wherever that door opening is built into a Kitchen Kompact layout, such as a matching wall or base cabinet in a DWhite run. The recessed panel pattern and framed construction tie directly to the Kitchen Kompact cabinet class, so it visually aligns with cabinets using the same 3/4 inch solid hardwood frames, end panels, and toe kicks. Because all frames are built of solid oak, maple or beech, the door matches the hardwood frame material used around openings in the broader cabinet assembly, helping keep grain and profile relationships consistent from unit to unit. In a replacement job, that consistency matters when you are matching one door to existing cabinets that already use solid wood hanging strips and corner blocks in their structure.
The mortise and tenon joints on each kiln-dried rail give this DW27X15 cabinet door a mechanically interlocked frame, which supports square alignment when you hang or adjust the door against a cabinet built from the same Kitchen Kompact components. Glued mortise and tenon construction at the corners works with the 3/4 inch solid hardwood thickness to resist racking forces, so reveals along the cabinet face stay more uniform during regular opening and closing cycles. Around the cabinet body, solid wood hanging strips at the top and bottom provide firm mounting lines that help keep the door operating plane stable relative to the box. Solid wood corner blocks that are glued and power nailed further stiffen the cabinet, which supports the door by reducing case twist that could otherwise throw the door out of alignment. Matching solid wood toe kicks at 3/4 inch thickness continue that structural approach down to the floor, helping the whole run support the door movement predictably.
The DW27X15 Kitchen Kompact replacement door is 15-1/2 inches wide and 27 inches high, so it aligns with openings built to that size in DWhite Kitchen Kompact cabinet layouts.
This Kitchen Kompact cabinet door uses a solid 3/4 inch hardwood frame with kiln-dried rails joined by mortise and tenon and glued, which supports joint strength during repeated door operation.
All frames are built of solid oak, maple or beech, giving the door a hardwood structure that supports hinge mounting and everyday kitchen wear at the frame edges.
The SAP description DWHITE DOOR 27 X 15 1/2 ties this recessed panel door to the DWhite finish line at 27 by 15-1/2 inches, which guides matching within Kitchen Kompact runs.
Solid wood hanging strips, corner blocks, toe kicks, and 3-ply end panels in Kitchen Kompact cabinets create a rigid box that helps the DW27X15 door operate along a stable face plane.
The mortise and tenon rail construction on this door distributes stress through the joint, helping the DW27X15 frame stay square so cabinet reveals remain more consistent over time.
The Kitchen Kompact 15-1/2 inch by 27 inch DWhite recessed panel door with solid 3/4 inch hardwood frame and mortise and tenon rail construction gives you a defined match point when servicing Kitchen Kompact runs. Using the DW27X15 part number and DWHITE DOOR 27 X 15 1/2 SAP description ties your order directly to the cabinet size and finish used in existing Kitchen Kompact installations. For replacement or expansion work on that line, choosing this door keeps the frame construction, dimensions, and visual pattern aligned with the cabinets you are working on.
Sold In: 1 Each