Kitchen Kompact replacement door in DWhite provides a matched option when you need to swap a damaged or worn door on a Kitchen Kompact cabinet run. The DW12X15 model is a 15-1/2 inch wide by 12 inch high recessed panel door, so it targets openings built around that specific size and style on Kitchen Kompact cabinets. The door is part of the Kitchen Kompact cabinet line, which uses frames built of solid 3/4 inch oak, maple, or beech, giving the frame a solid-wood structure that supports everyday kitchen traffic. Each rail in the frame is kiln-dried and joined by mortise and tenon, then glued, so the frame is designed as a tight, stable assembly that resists loosening in normal service. This Kitchen Kompact construction approach lets you match a replacement door to the strength and visual style used across the rest of the run.
The DW12X15 Kitchen Kompact cabinet door is specified at 15-1/2 inches wide and 12 inches high, giving a clear target when planning a swap in a run that uses this size. The recessed panel design keeps the center panel set in from the frame, so the replacement door maintains the same visual profile as existing recessed panel fronts in the Kitchen Kompact line. Because the frame construction uses solid 3/4 inch oak, maple, or beech with kiln-dried, mortise and tenon joined rails, the door is set up to hang square on cabinet hinges and stay aligned with adjacent doors under normal use.
The Kitchen Kompact 15-1/2 inch wide by 12 inch high recessed panel door, model DW12X15, is sized for cabinet openings built around that footprint within the Kitchen Kompact system. As a DWhite door, it aligns with Kitchen Kompact DWhite cabinetry so the replacement panel keeps a consistent color and recessed panel look across upper or lower runs specified with this style. Because the product belongs to the Kitchen Kompact cabinet class, it ties directly into overall construction that uses solid wood frames, solid wood toe kicks, solid wood hanging strips, solid wood corner blocks, and 3-ply end panels with an engineered wood core and hardwood veneers. This shared construction profile means a replaced door can visually and structurally match the surrounding cabinet run when the existing cabinets use the same Kitchen Kompact system.
The solid 3/4 inch oak, maple, or beech frame used in Kitchen Kompact doors provides a dense, stable structure that supports reliable hinge mounting points and smooth door travel over daily cycles. Kiln-dried rails joined by mortise and tenon and glued create joints designed to hold their geometry, so squareness is maintained, which supports consistent reveals between this door and adjacent components. Solid wood hanging strips at the top and bottom of wall and base cabinets give the cabinet case a firm connection to the structure, which helps keep hinge alignment steady after the replacement door is installed. Solid wood corner blocks that are glued and power nailed stabilize cabinet corners, helping the case resist racking that could otherwise twist door alignment. The 3-ply end panels, with a 1/2 inch thick engineered wood core and hardwood veneers, provide a balanced, stable side construction that supports the overall rigidity of the cabinet run, so the DW12X15 door continues to operate against a cabinet line designed to stay true over time.
The Kitchen Kompact DW12X15 replacement door is 15-1/2 inches wide by 12 inches high, which targets cabinet openings that were originally built around this specific size.
The Kitchen Kompact DWhite DW12X15 door uses a recessed panel design, so it maintains the same inset center-panel look as other recessed panel fronts in matching Kitchen Kompact runs.
The Kitchen Kompact door frame is built of solid 3/4 inch oak, maple, or beech, giving the frame a solid-wood structure suited to everyday cabinet door use.
Rails on Kitchen Kompact frames are kiln-dried, joined by mortise and tenon, and then glued, which creates a tight joint that supports long-term door squareness and stability.
Kitchen Kompact cabinets use solid wood corner blocks, solid wood toe kicks, and solid wood hanging strips, giving the DW12X15 door a rigid, stable cabinet box to operate against.
Kitchen Kompact end panels have a 3-ply construction with a 1/2 inch thick engineered wood core and hardwood veneers, providing stable cabinet sides around the door area.
The Kitchen Kompact 15-1/2 inch wide by 12 inch high DWhite recessed panel door, model DW12X15, gives you a defined replacement option when you need to match an existing Kitchen Kompact cabinet run. With frames built of solid 3/4 inch oak, maple, or beech, kiln-dried mortise and tenon rails, solid wood toe kicks, solid wood hanging strips, solid wood corner blocks, and 3-ply end panels using a 1/2 inch engineered wood core with hardwood veneers, this door ties directly into the same construction approach used across Kitchen Kompact cabinetry. Use this DW12X15 door when the original layout was built around this size and DWhite recessed panel style, so your repair or upgrade can follow the same Kitchen Kompact structure and appearance from Wurth Baer Supply.
Sold In: 1 Each