Kitchen Kompact replacement door identifies this part as a dedicated door solution for Kitchen Kompact cabinetry, so it serves as a direct fit choice when matching existing Kitchen Kompact runs in DWhite. The product name specifies a 9-1/2 inch width and 22 inch height, which sets clear face dimensions when planning a door swap or cabinet repair around an existing opening. The recessed panel style described in the product name establishes the profile, helping align this door visually with other recessed panel Kitchen Kompact fronts in the same finish. The manufacturer part number DW22X9 directly ties this door to Kitchen Kompact documentation, which helps keep ordering repeat pieces consistent across multiple cabinets or future service work.
The 9-1/2 inch width on this Kitchen Kompact cabinet door sets the horizontal coverage over the cabinet opening, which matters when aligning reveals across a cabinet run. The 22 inch height defines the vertical face, allowing installers to size hinges and layout clearances above toe kicks or below countertops. The DWhite identification taken from the SAP description "DWHITE DOOR 22 X 9 1/2" ties the door to the DWhite finish family, which is important when visually matching existing Kitchen Kompact fronts during replacements or additions in the same kitchen.
This DW22X9 Kitchen Kompact door, listed as a 9-1/2 inch by 22 inch recessed panel DWhite door, fits into Kitchen Kompact layouts where that specific opening size and style are already in use. The product name "Kitchen Kompact 9-1/2"W x 22"H DWhite Replacement Door, Recessed Panel - DW22X9" defines both the style and nominal size, which helps designers and installers maintain consistent sightlines when mixing new doors with existing cabinets. The DWhite description identifies the finish group, which matters when tying this door into a full DWhite Kitchen Kompact cabinet sequence so runs look continuous. Because the door is part of the Kitchen Kompact cabinet class and category, it aligns with the wider Kitchen Kompact system where solid wood frames and coordinated panels are standard, supporting uniform appearance across wall and base cabinets using this size.
The solid wood cabinet door frame, built from 3/4 inch oak, maple, or beech, provides a dense structure that holds hinge fasteners in hardwood, which benefits long-term swing performance. Kiln-dried rails joined with mortise and tenon joints and then glued lock the frame together at each connection, which reduces the likelihood of twist or racking that could affect reveals. Glued and power-nailed solid wood corner blocks further tie the frame into one unit, adding mechanical reinforcement that supports repeated opening and closing. Solid wood toe kicks at 3/4 inch thick in the broader Kitchen Kompact system work with matching doors to maintain a consistent visual line from base cabinet bottom to door edge. Solid wood hanging strips on wall and base cabinets, located at the top and bottom, create a sturdy cabinet body, so this DW22X9 door mounts on a cabinet box designed to hold weight and stay square in service.
The DW22X9 Kitchen Kompact door is identified as 9-1/2 inches wide and 22 inches high, which guides layout when matching an existing cabinet opening or planning door spacing.
The Kitchen Kompact 9-1/2 inch x 22 inch DWhite replacement door is a recessed panel style tied to the DWhite group, so it aligns visually with DWhite Kitchen Kompact cabinetry.
The frame uses solid 3/4 inch oak, maple, or beech with kiln-dried rails joined by mortise and tenon and glue, supporting a stable, square door under regular hinge loads.
Solid wood corner blocks are glued and power nailed, tying the frame corners together so the door better resists loosening and maintains alignment over time.
Solid wood hanging strips on Kitchen Kompact wall and base cabinets create a sturdy cabinet box, giving this DW22X9 door a solid structure to hinge from.
Matching end panels use 3-ply construction with a 1/2 inch engineered wood core and hardwood veneers, supporting a coordinated cabinet system alongside this door.
The Kitchen Kompact replacement door in DWhite with a 9-1/2 inch width and 22 inch height offers a defined option when a Cabinet in the Kitchen Kompact line needs a door sized to that opening. The recessed panel identity in the product name signals a specific face profile that works with other recessed panel Fronts from the same brand. Using the DW22X9 designation from the manufacturer part number keeps ordering consistent on multi-cabinet projects where several doors of this size and style are required.
Sold In: 1 Each