Kitchen Kompact replacement door identifies this part as a dedicated door for the Kitchen Kompact cabinet line, helping match existing runs when you need to swap a damaged front. The 21-1/2 inch wide by 22 inch high sizing, identified by code DW22X21, defines the face dimensions so you can line this door up with the opening and surrounding fronts on an existing DWhite layout. The recessed panel style establishes the door profile, so the visual pattern stays consistent across the run when this door replaces an older piece. The Kitchen Kompact branding ties this replacement directly to the Kitchen Kompact cabinet construction, which helps maintain a unified cabinet appearance when this door is installed on a base or wall unit built from the same line.
The specified size of 21-1/2 inches wide by 22 inches high sets the overall door footprint, which is critical when aligning this DWhite replacement door to existing cabinet openings. The solid 3/4 inch frame thickness provides material depth for hinge cup boring, so standard cabinet hinge patterns can be machined without weakening the edges of the recessed panel frame. The kiln-dried, mortise-and-tenon-joined rails create a square, rigid perimeter that helps the door hang flat against Kitchen Kompact cabinet boxes built with solid wood hanging strips. Because the same construction approach is used across Kitchen Kompact cabinets, this DWhite door works as a visual and structural match when you need to restore a damaged or worn front on a matching unit.
The manufacturer part number DW22X21 designates a DWhite door sized at 21-1/2 inches wide by 22 inches high, which positions it for locations on Kitchen Kompact cabinets calling for that face size. The recessed panel profile aligns with other recessed panel fronts in the Kitchen Kompact line, so this door serves well wherever you need to keep that same center-panel look on a run of cabinets. The solid 3/4 inch frame built from oak, maple or beech gives the door enough structure for hinge boring at typical setback distances, so it can be mounted on base or wall cabinets that share the same DWhite style. Because Kitchen Kompact cabinets use solid wood hanging strips at the top and bottom of wall and base units, this door can work on those cabinets within the line where the opening and overlay match the 21-1/2 by 22 size.
The solid wood 3/4 inch frame used on all Kitchen Kompact doors provides a dense edge for hinge screws to bite into, which helps the door stay securely mounted during years of opening and closing. Kiln-dried rails reduce internal stresses before machining, which supports the door staying flatter when it is hung on cabinets exposed to kitchen humidity and temperature shifts. Mortise and tenon joints at each corner create a positive mechanical engagement between rails and stiles, and the added glue further locks those joints, so the recessed panel frame resists twisting under the weight of the door. In the supporting cabinet box, solid wood corner blocks that are glued and power nailed give the case added rigidity, which helps keep the hinge-side of this door steady in service. Solid wood toe kicks at 3/4 inch thickness and solid wood hanging strips at the top and bottom of wall and base cabinets support the overall cabinet structure, helping this DWhite replacement door maintain consistent reveals and alignment across the face of the run.
The Kitchen Kompact DWhite door with part number DW22X21 is 21-1/2 inches wide by 22 inches high, which defines the face size used when matching it to an existing cabinet opening.
The door frame is built of solid 3/4 inch oak, maple or beech, with kiln-dried rails joined by mortise and tenon and then glued, which supports long-term joint strength in service.
The kiln-dried rails have controlled moisture content, which helps the DW22X21 door resist movement from humidity changes common in kitchen environments, supporting flatter, more stable operation.
The recessed panel configuration gives the door a framed look with a set-back center panel, which aligns visually with other Kitchen Kompact recessed panel fronts in DWhite layouts.
Solid wood hanging strips on Kitchen Kompact wall and base cabinets provide a rigid mounting area, helping this DWhite replacement door hang true and maintain consistent gaps.
Solid wood corner blocks in the cabinet case are glued and power nailed, which stiffens the box so hinges carrying the DW22X21 door stay anchored on a stable structure.
The Kitchen Kompact DWhite replacement door with part number DW22X21 gives you a recessed panel front sized at 21-1/2 inches wide by 22 inches high, matching cabinets built on the same system. The solid 3/4 inch oak, maple or beech frame, with kiln-dried, mortise-and-tenon-joined rails, supports hinge machining and long-term operation on Kitchen Kompact boxes reinforced by solid wood corner blocks, toe kicks and hanging strips. When your project calls for restoring a DWhite cabinet run that was originally built with this construction, selecting this door lets the visual style and structural approach carry through the repair.
Sold In: 1 Each