Kitchen Kompact replacement door gives you a dedicated option when you need to match existing Kitchen Kompact cabinetry in a DWhite finish, so a damaged or outdated door can be swapped while keeping the overall run consistent.
This 21-1/2 inch wide, 33 inch high door matches the DW33X21 size, which helps align hinge layouts and reveals on cabinets originally built around this dimension. That sizing keeps door gaps predictable across adjacent cabinets.
The recessed panel style keeps the center visually set back from the rails and stiles, which supports a clean, framed look across the kitchen. When you line up multiple doors of the same style, the panel depth and frame lines carry smoothly from unit to unit.
As part of the Kitchen Kompact cabinet line, this door fits into a system that uses solid wood components and structured end panels, so the replacement front is designed around the same construction approach as the original cabinets.
This DWhite cabinet door 33 x 21-1/2 is sized so its 21-1/2 inch width and 33 inch height can match openings designed around the DW33X21 part, which matters when reusing hinge locations on existing Kitchen Kompact frames.
The solid 3/4 inch frame stock around the recessed panel gives you material for hinge cup boring and screw bite on standard cabinet hardware, so mounting forces stay in solid wood rather than thin substrate.
Because the surrounding Kitchen Kompact cabinets use solid wood hanging strips and structured end panels, the door is working with a stable box, which supports even reveals once hinges are adjusted.
The mortise and tenon rail joints and corner blocks hold the frame square during handling and hanging, so the installer can focus on hinge placement and alignment rather than fighting twist in the door itself.
The Kitchen Kompact DWhite door is designed as a front for Kitchen Kompact cabinets that share the same DWhite finish and DW33X21 size, so it targets situations where an existing door needs replacement while preserving the rest of the cabinet run.
Solid 3/4 inch oak, maple, or beech in the frame supports use in active kitchen spaces, because the door edges and hinge sides rely on hardwood strength rather than a thinner composite. That is helpful when the door is opened frequently or carries typical kitchen loads on the front.
The recessed panel design works well anywhere the surrounding Kitchen Kompact cabinets already use the same panel profile, because consistent panel depth and frame widths keep the bank of doors reading as a single, continuous installation.
End panels built with a 1/2 inch engineered wood core and hardwood veneers tie the cabinet boxes together behind the scenes, so this replacement front can operate against a rigid carcass that stays square at the opening.
The mortise and tenon joints between kiln-dried rails create predictable squareness in the frame, which supports repeatable hinge boring patterns and consistent clearances at the top and bottom edges when you hang multiple doors.
Corner blocks that are glued and power nailed give the frame added resistance to racking, so once you have the reveals dialed in, they hold steady through normal use rather than drifting out of alignment.
Solid wood hanging strips at the top and bottom of Kitchen Kompact wall and base cabinets keep the box tied firmly to the wall structure, which means the hinge side of this door is supported by a stable cabinet, reducing the need for later adjustment.
The 3-ply end panel construction with a 1/2 inch engineered wood core and hardwood veneers helps keep cabinet sides flat, so the door edge tracks against a straight reference, minimizing binding or uneven gaps over the height of the opening.
Solid wood toe kicks 3/4 inch thick give the base cabinet a firm footing, so the cabinet front sits level and the door bottom line matches adjacent units for a clean, continuous toe alignment.
Because all frames in the Kitchen Kompact line share the solid wood, kiln-dried, mortise and tenon approach, replacing one front with this door helps preserve the original cabinet performance and appearance across the entire installation.
The Kitchen Kompact replacement door has a 21-1/2 inch width and 33 inch height, which aligns with openings designed around the DW33X21 cabinet front size.
The door frame uses solid 3/4 inch oak, maple, or beech with kiln-dried rails joined by mortise and tenon and glue, supporting a square, stable frame for hinge mounting.
The recessed panel design sets the center back from the frame, creating a defined border that visually matches other Kitchen Kompact recessed panel fronts.
Solid wood corner blocks are glued and power nailed to tie the frame together, helping the door resist racking and keeping reveals consistent in use.
Solid wood hanging strips on wall and base cabinets at the top and bottom give the cabinet box firm anchoring, supporting stable hinge action for this door.
End panels with a 1/2 inch engineered wood core and hardwood veneers keep cabinet sides flat, helping this door swing against a straight opening with even gaps.
Kitchen Kompact replacement door in the DWhite DW33X21 size gives you a direct option when you need to restore a Kitchen Kompact run built on solid wood frames and structured end panels. Matching the 21-1/2 inch width, 33 inch height, and recessed panel profile keeps the new front working with existing hinges, reveals, and cabinet box construction, so the repaired section blends visually and structurally with the rest of the installation.
Sold In: 1 Each