Kitchen Kompact replacement door in DWhite at 11 inches wide by 33 inches high is built for matching existing Kitchen Kompact layouts where this size is already in use. The DW33X11 sizing identifies the 11 inch width and 33 inch height, which helps keep elevations consistent when you are swapping a damaged door or finishing a run with the same door layout. The recessed panel style on this door creates the framed look that coordinates with other Kitchen Kompact fronts built on the same platform. All frames on this Kitchen Kompact line are built of solid 3/4 inch oak, maple, or beech, so the door frame carries solid hardwood around the panel for strength in normal kitchen use. This DWhite door integrates into Kitchen Kompact cabinet runs that use the same construction, maintaining a unified appearance across the installation.
The 11 inch width and 33 inch height on the DW33X11 DWhite door set the opening coverage and reveal lines when used with matching Kitchen Kompact cases. That sizing works with the solid 3/4 inch hardwood frame construction, so hinge placement on the frame edges aligns with standard Kitchen Kompact cabinet layouts that share the same build. The recessed panel layout works with the mortise and tenon jointed frame, so the panel sits inside a rigid perimeter, helping keep the door face true along its height. When paired with cabinets that also use solid wood hanging strips and 3-ply end panels with engineered cores, this door helps maintain consistent door gaps and sight lines along wall and base runs.
The Kitchen Kompact 11 inch by 33 inch DWhite door with recessed panel is intended for cabinet layouts that already use Kitchen Kompact construction. Its size and DW33X11 designation match openings planned around that specific height and width, so it can be used when matching an existing cabinet run that uses similar DWhite fronts. Solid 3/4 inch oak, maple, or beech frame construction ties this door to Kitchen Kompact cabinet frames built of the same hardwood stock, so door edges and face frames share similar material character. When this door is paired with cabinets using 3-ply end panels with a 1/2 inch engineered core and hardwood veneers, the visible sides and fronts share the same general material structure, which supports a consistent look down a bank of wall or base units.
Each rail on the Kitchen Kompact DWhite DW33X11 door is kiln-dried before assembly, which stabilizes the hardwood so the frame better resists movement in a typical indoor kitchen environment. The mortise and tenon joints between rails and stiles, glued for added strength, create a solid frame that helps the recessed panel stay correctly seated as the door is opened and closed in regular use. Solid wood corner blocks in the cabinet construction are both glued and power nailed, tying the cabinet box into a rigid structure that gives this door a stable mounting surface. Solid wood toe kicks at 3/4 inch thick add mass at the base of cabinet runs, helping keep the front plane steady where this 33 inch high door lines up with drawer fronts or adjacent doors. Solid wood hanging strips at the top and bottom of wall and base cabinets keep the case firmly held to wall studs or floor lines, supporting consistent door reveals. The 3-ply end panels with 1/2 inch engineered wood core and hardwood veneers add sidewall rigidity near hinge locations, which helps the DWhite door swing through its path without the case twisting under everyday kitchen loads.
The Kitchen Kompact replacement door is 11 inches wide by 33 inches high, so it is sized for openings designed around that specific DW33X11 format.
The DWhite DW33X11 cabinet door uses a recessed panel design, giving a framed look that matches other Kitchen Kompact recessed panel fronts.
All frames in this Kitchen Kompact line are built of solid 3/4 inch oak, maple, or beech, providing a hardwood frame around the recessed panel.
Each rail is joined to the stiles by mortise and tenon and then glued, creating a strong frame that holds up to normal opening and closing cycles.
Cabinets use solid wood hanging strips, solid wood toe kicks, solid wood corner blocks, and 3-ply end panels with an engineered wood core and hardwood veneers.
The SAP description lists this product as DWHITE DOOR 33 X 11, indicating a DWhite finish door sized at 33 by 11 inches in the Kitchen Kompact line.
The Kitchen Kompact replacement door in DWhite at 11 inches by 33 inches, identified as DW33X11, is sized and framed for cabinet runs using Kitchen Kompact construction. The solid 3/4 inch hardwood frame, mortise and tenon joints, and kiln-dried rails create a stable door that works with cabinets built with solid wood hanging strips, solid toe kicks, solid corner blocks, and 3-ply end panels. Selecting this door allows a project to extend or repair Kitchen Kompact layouts while keeping the same recessed panel style, DWhite appearance, and cabinet construction approach through the run.
Sold In: 1 Each