Kitchen Kompact Warmwood sink base gives you a 30 inch wide, 32-1/2 inch high, 24 inch deep ADA compliant cabinet that is ready to drop into handicap-conscious layouts where consistent sizing keeps base runs aligned. The mortised and tenoned construction of solid 3/4 inch maple door frames creates a rigid front that holds hinges and doors in place over time, which supports smooth operation in daily kitchen use. Flat panel plywood inserts built as three-ply panels with a rotary cut hard maple veneer face provide a stable door field that resists warping while keeping a Warmwood look across the run. Solid wood corner blocks that are glued and power nailed tie the cabinet box together at stress points, helping the sink base handle repeated door use. Solid wood hanging strips located on the top and bottom give you continuous solid material for fastening the cabinet to wall framing along the length.
The 30 inch width, 32-1/2 inch height, and 24 inch depth on this Kitchen Kompact ADA sink base simplify planning for countertop and appliance spacing, because the dimensions match common base cabinet footprints. Solid wood hanging strips at the top and bottom give you long, continuous fastening zones so fasteners bite into hardwood instead of edge grain, which helps the cabinet stay tight to the wall. Solid wood corner blocks that are glued and power nailed brace the corners, so the box resists racking when leveled and shimmed. The 3/4 inch solid wood toe kicks provide a strong base at floor level that supports scribing or trim transitions where the cabinet meets finished flooring along the run.
This Kitchen Kompact Warmwood sink base, sized at 30 inches wide by 32-1/2 inches high by 24 inches deep, fits into standard-depth base rows where ADA compliant height is required under counters. The recessed panel Warmwood door design with maple flat panel doors aligns with other Kitchen Kompact cabinets in the same finish, supporting visually continuous fronts in L-shaped or straight runs. Maple door frames built from solid 3/4 inch stock add structure at the opening, which is valuable at sink locations that see frequent use. Adjustable shelves inside the base give flexibility in areas not occupied by sink bowls or plumbing, letting project layouts adapt interior storage to different trap or supply locations. Solid wood toe kicks at 3/4 inch thickness carry the cabinet facade to the floor, creating a defined base line that mates cleanly to finished flooring and adjacent bases.
The mortised and tenoned construction of the solid 3/4 inch maple door frames creates strong joints at each corner, so hinge mounting points remain square, which supports consistent door reveals across neighboring cabinets. Flat panel plywood inserts made as three-ply panels with a rotary cut hard maple veneer face hold a flat plane across the panel, reducing the chance of twist that could affect door alignment. Solid wood corner blocks that are glued and power nailed bring mechanical and adhesive strength together at stress zones, helping the cabinet stay square after transport, handling, and leveling. Solid wood hanging strips at the top and bottom of the back give reliable anchoring surfaces, which supports straight, level installs when cabinets are ganged and fastened to studs. The four step stain, sealer, sanding, and catalyzed top coat system creates a uniform finish film, so multiple WWH30RBS units read consistently under jobsite and finished lighting.
The WWH30RBS sink base is 30 inches wide, 32-1/2 inches high, and 24 inches deep, which matches standard base cabinet footprints and simplifies planning for countertops and adjacent cabinets.
The door frames use mortised and tenoned construction with solid 3/4 inch maple, providing strong joints that help doors stay aligned around the sink opening.
The door has a flat panel plywood insert made as a three-ply panel with a rotary cut hard maple veneer face, giving a stable, flat panel with a maple appearance.
Solid wood hanging strips located on the top and bottom provide continuous hardwood surfaces for fastening, supporting a secure attachment to wall framing.
The cabinet uses plywood drawers with a front to back epoxy-coated drawer system securely attached to a solid wood strip at the back, helping drawers track smoothly.
The cabinet receives a four step process of stain, sealer, sanding and catalyzed top coat, giving the maple surfaces a consistent, protective finish layer.
The Kitchen Kompact Warmwood sink base WWH30RBS pairs ADA compliant height with a 30 inch width and 24 inch depth, so it drops into standard base layouts while meeting design intent. Mortised and tenoned 3/4 inch maple door frames, flat panel plywood inserts with a rotary cut hard maple veneer face, and solid wood corner blocks create a solid front and box that support everyday sink use. Solid wood hanging strips, 3/4 inch solid wood toe kicks, adjustable shelves, and plywood drawers with an epoxy-coated drawer system provide practical details for a working kitchen, giving installers a Warmwood sink base that matches the broader Kitchen Kompact run.
Sold In: 1 Each