Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Kitchen Kompact Warmwood sink base gives you a 36 inch wide, 32-1/2 inch high, 24 inch deep cabinet sized for ADA compliant sink base layouts, so the dimensions support accessible kitchen planning and consistent centerline runs. The cabinet uses door frames with mortised and tenoned construction of solid 3/4 inch maple, creating a rigid face frame that helps doors stay aligned after repeated daily use. A flat panel plywood insert made from a three-ply panel with a rotary cut hard maple veneer face provides a stable door panel surface that takes finish evenly across the front. Solid wood corner blocks are glued and power nailed, tying the cabinet box together at stress points so the carcass resists racking when the cabinet is moved or fastened in place. Solid wood hanging strips located on the top and bottom give you solid mounting areas along the back, which supports secure wall fastening and straight installations.
This Kitchen Kompact 36 inch Warmwood sink base cabinet is 36 inches wide, 32-1/2 inches high, and 24 inches deep, so it aligns with standard kitchen base depths while meeting the lower height needed for ADA compliant layouts. The range and sink base design described as Warmwood handicap 36 range/base/sink in the SAP description signals that this unit is intended for accessible range or sink positions, which helps when planning mixed-height runs. Maple, flat panel doors give the front a consistent profile that matches other Kitchen Kompact pieces, supporting visual alignment across adjoining cabinets. Adjustable shelves are part of the cabinet interior, letting you position storage around plumbing or under-sink components for better use of the remaining volume.
The Warmwood ADA sink base cabinet is identified as a 36 inch range/base/sink unit, so it is suited to positions under sinks or ranges where ADA compliant heights are required in a kitchen run. With overall dimensions of 36 inches wide, 32-1/2 inches high, and 24 inches deep, the cabinet fits standard countertop depths while providing the lower working height that accessible layouts call for at key stations. Solid wood toe kicks at 3/4 inch thick give the front bottom edge a stable structure, which works well where wheel and foot traffic often contact the base. Maple, flat panel doors keep the look consistent with other Kitchen Kompact Warmwood cabinets, so this ADA section can be integrated into mixed runs without changing door style. The Warmwood stain and top coat system applied in four steps allows this unit to visually tie into other Warmwood pieces across the space.
The mortised and tenoned solid 3/4 inch maple door frames on this Kitchen Kompact WWH36RBS cabinet provide square, strong corners, so hinges operate on a stable frame and door alignment is easier to maintain from cabinet to cabinet. Solid wood hanging strips located on the top and bottom give installers continuous backing for fasteners along the rear edge, which helps pull the cabinet tight to the wall and maintain a straight line with neighboring units. Solid wood corner blocks that are glued and power nailed tie cabinet sides to the front, so the box resists racking when clamped or when countertops are set, reducing on-site adjustment time. Adjustable shelves allow the interior to be tailored around plumbing, which is valuable at sink locations where trap and supply lines cut into usable space. The plywood drawers with a front to back epoxy-coated drawer system are securely attached to a solid wood strip in the back of the cabinet, giving drawer slides a firm anchor that supports smooth operation along the full depth. A 4 step process of stain, sealer, sanding and catalyzed top coat is applied, so touch-ups and replacements in the same Warmwood series remain visually consistent across different install dates.
The WWH36RBS Warmwood sink base is 36 inches wide, 32-1/2 inches high, and 24 inches deep, so it lines up with standard base depths while fitting ADA compliant height layouts.
The door frames use mortised and tenoned solid 3/4 inch maple with a flat panel plywood insert, giving a strong perimeter and stable center panel for consistent door alignment.
The Warmwood cabinet uses a 4 step process of stain, sealer, sanding and catalyzed top coat, creating a finished surface suited to routine kitchen use and visual consistency.
Solid wood hanging strips located on the top and bottom provide solid backing for fasteners, helping the cabinet pull tight to the wall and stay aligned in a run.
The cabinet has plywood drawers with a front to back epoxy-coated drawer system securely attached to a solid wood strip, supporting smooth operation along the full depth.
The product name notes ADA compliant and the SAP description lists Warmwood handicap 36 range/base/sink, indicating it is intended for accessible sink or range locations.
The Kitchen Kompact 36 inch Warmwood sink base ADA compliant cabinet combines accessible 32-1/2 inch height with a 24 inch depth and 36 inch width, aligning with standard countertops while serving ADA sink or range spots. Mortised and tenoned solid maple door frames, a three-ply flat panel with rotary cut hard maple veneer, and solid wood corner blocks give the box and doors stability that suits everyday kitchen traffic. Solid wood hanging strips and solid wood toe kicks, together with plywood drawers on a front to back epoxy-coated system, provide a cabinet structure ready to be integrated into Warmwood runs where accessible functionality and consistent appearance are both required.
Sold In: 1 Each