Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Kitchen Kompact Warmwood sink base is a 33 inch wide, 32-1/2 inch high, 24 inch deep cabinet that provides a dedicated base for a sink in ADA-compliant kitchen runs, so layout follows a consistent footprint around accessible appliances and work zones. The cabinet uses mortised and tenoned construction on the door frames with solid 3/4 inch maple, which ties the corners together mechanically so the door assembly resists racking during daily opening and closing. A flat panel plywood insert with a three-ply panel and rotary cut hard maple veneer face gives the recessed panel look while keeping the panel stable over time in normal kitchen humidity. Maple, flat panel doors match that insert construction, so the visual and structural design stay consistent across the front. Solid wood corner blocks are glued and power nailed, tying the cabinet box together at stress points so loads from the counter and sink are transferred into the case cleanly.
The Kitchen Kompact 33 inch wide by 24 inch deep footprint lets installers drop this Warmwood sink base into standard-depth kitchen lines, so it aligns with adjacent bases and allows straightforward countertop templating. Solid wood hanging strips at the top and bottom of the back give long, continuous fastening zones, which helps draw the cabinet tight to wall studs while keeping the back plane straight. Solid wood toe kicks at 3/4 inch thickness run along the front, so shims behind the base transfer into a solid face when leveling to adjoining cabinets. Plywood drawers use a front to back epoxy-coated drawer system securely attached to a solid wood strip in the back of the cabinet, which helps the drawer glide track remain anchored so drawer motion stays smooth after installation.
This Kitchen Kompact Warmwood sink base with recessed panel fronts is built as a 33 inch wide by 32-1/2 inch high cabinet, which positions it naturally in standard kitchen layouts where that width is planned for a sink centerline. The 24 inch depth matches common base cabinet depth, so countertop fabricators can run a continuous surface over adjoining bases without depth transitions. The Warmwood finish follows a 4 step process of stain, sealer, sanding, and catalyzed top coat, which builds color and protection on the maple faces so the cabinet presents a consistent look along a run of matching Kitchen Kompact units. ADA-compliant intent for this sink base, noted in the product name, ties the height and configuration to accessible kitchen design planning, which matters when coordinating clearances and approach space in handicap-focused projects. Maple, flat panel doors combine with the flat panel plywood insert to create a recessed panel appearance, which aligns with the stated recessed panel style callout in the product name for cohesive design.
The door construction uses mortised and tenoned solid 3/4 inch maple frames, which provides square, rigid corners so hinge mounting points stay in plane and help doors close cleanly over time. Concealed, self-closing hinges are specified, so doors pull themselves shut from a partially closed position, which reduces door chatter and leaves fronts in a consistent position along the cabinet face line. Flat panel plywood inserts with rotary cut hard maple veneer deliver a stable field within the door frames, supporting consistent reveals and panel appearance between doors. Solid wood corner blocks that are glued and power nailed reinforce joints at the top and bottom of the case, which supports countertop and sink loads as they transfer through the cabinet. Plywood drawers, combined with a front to back epoxy-coated drawer system securely attached to a solid wood strip in the back, provide a guided drawer movement path that resists sagging, which is useful when drawers are loaded with cleaning supplies or everyday utensils under the sink. The solid wood hanging strips at both top and bottom give two structural nailing or screwing zones, which helps installers pull the cabinet flat to potentially uneven wall surfaces while keeping the box square with neighboring cabinets.
The WWH33RBS sink base measures 33 inches wide, 32-1/2 inches high, and 24 inches deep, so it fits standard-depth base cabinet runs planned for a 33 inch sink opening.
The doors on this cabinet use mortised and tenoned solid 3/4 inch maple frames with a flat panel plywood insert, giving a rigid frame and stable recessed panel look for long-term door alignment.
This Kitchen Kompact Warmwood sink base uses concealed, self-closing hinges, so the doors close into a consistent position without external hinge hardware breaking the front appearance.
The Warmwood finish uses a 4 step process of stain, sealer, sanding, and catalyzed top coat, building color and a protective film on maple faces for a uniform cabinet appearance.
The cabinet uses plywood drawers with a front to back epoxy-coated drawer system securely attached to a solid wood strip, supporting smooth drawer travel under typical storage loads.
Solid wood corner blocks that are glued and power nailed, along with solid wood hanging strips, help transfer countertop and sink loads through a reinforced cabinet box.
The Kitchen Kompact Warmwood sink base WWH33RBS provides a 33 inch wide, ADA-compliant cabinet built around solid maple frames, plywood panels, and reinforced corners, so it integrates into standard-depth kitchen layouts. The 4 step Warmwood finish process on maple faces coordinates with other Kitchen Kompact Warmwood units, which supports consistent color and style when building full runs. Concealed, self-closing hinges and the epoxy-coated drawer system simplify day-to-day use while keeping fronts aligned. For projects using Kitchen Kompact cabinetry and planning a 33 inch sink position, this sink base gives a defined footprint and construction approach that aligns structure, appearance, and accessible layout requirements.
Sold In: 1 Each