
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
The Pro Value Series PRO 560 is a 15 inch full-extension, soft-close undermount drawer slide suited to both face-frame and frameless cabinet construction. Rated 100 lb per pair with ball-bearing travel, it delivers concealed slide performance at a value price point for shops running high drawer counts.
A 15 inch slide pairs with shallower cabinet runs: bathroom vanities, narrow base cabinets, island drawer banks, and secondary kitchen drawers where a full 18 or 21 inch slide would overshoot the available interior depth. The 15 inch nominal length keeps the drawer box proportional to the opening and leaves adequate clearance at the rear of the cabinet. Full extension means everything inside the drawer comes forward to the face — a meaningful advantage over 3/4-extension slides in tighter spaces where reaching to the back still matters.
The PRO 560 is built from zinc-aluminum with a zinc finish — a practical, corrosion-resistant combination for interior cabinetry. The ball-bearing carriage distinguishes it from roller-based economy slides: bearing travel stays consistent under load and does not degrade the way nylon rollers can over high-cycle use. Because the slide mounts concealed beneath the drawer box, the finish is functional rather than decorative — it does its job out of sight.
Cabinet shops producing face-frame and frameless work side by side will find the dual-construction compatibility useful — one slide SKU covers both cabinet types at this length. The 100 lb per pair rating is sufficient for residential kitchen and bath drawers, and the soft-close mechanism meets the expectation most homeowners and designers bring to any drawer project. Contractors finishing out vanities, designers specifying concealed hardware, and shops building mixed-construction runs all land on this slide for the same reason: it delivers the core undermount feature set without the premium-line price.
Yes. Like all undermount slides, the PRO 560 requires the drawer box to be built to the manufacturer's specification for this series — including nominal 15 inch length, the correct box width for the required side clearance, a bottom recess, and a rear notch for the slide to seat properly. A standard off-the-shelf box that has not been dimensioned to this slide will not seat correctly.
The PRO 560 is designed for drawer sides up to 5/8 inch thick. It is not intended for 3/4 inch material; for 3/4 inch drawer sides, a slide specifically rated for that thickness is required.
Face-frame cabinets typically require rear mounting brackets to support the back end of the slide where the cabinet side is set behind the face frame. Confirm whether the series-specific rear brackets are included with this SKU or need to be ordered separately before installing in a face-frame cabinet.
Verify whether locking devices ship with this SKU or are sold as a separate accessory. Front locking devices for the PRO 560 are series-specific and will not interchange with locking devices from other undermount brands or series.
Per pair — that is the standard way undermount drawer slide capacity is stated in this catalog. One pair of PRO 560 slides carries up to 100 lb of drawer and contents combined.
The PRO 560 in 15 inch puts full-extension, soft-close, ball-bearing performance in a compact length that fits the cabinetry most shops build every week — without overcomplicating the order or the install.
Sold In: 6 Set
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 6 Pair | DSPRO560FLD-NARROW Mfr# 0684250156961 120 | PRO Value PRO560 6-Pair Box Front Locking Device, Left Hand/Right Hand, 0684250156961 120 | ||||
Sold in: 6 Pair | DSPRO560FLD-3D Mfr# 0684250157961 120 | PRO Value PRO560 6-Pair Box Front Locking Device, Left Hand/Right Hand, 0684250157961 120 | ||||
Sold in: 6 Pair | DSPRO560FLD-2D Mfr# 0684250159961 120 | PRO560 2D 4-Way Adjustable Non-Flanged Front Locking Device Set, 0684250159961 120 |
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 12 Each | DSPRO560-RB Mfr# 0684250712961 240 | PRO Value PRO560 Rear Mounting Bracket, 0684250712961 240 |