Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Mockett 3 inch grommet cap and liner set is a matched pair designed for a 2-1/2 inch hole, so it finishes a standard cutout with a precise fit and a clean, defined edge on work surfaces. The set format means the cap and liner are sized to work together, helping installers avoid trial-and-error mixing of separate parts. The desert sand color ties directly to the EDP3-93D designation, giving a neutral tone that blends with many laminate and painted surfaces on desks, shelves, or closet components. As a grommet in the multimedia and workspace components category, it provides a dedicated pass-through point in panels where cables or other lines need a fixed opening. The flip flop style referenced in the description identifies this as a hinged cap style, which allows the opening to be accessed or closed as needed in routine use.
The specified 2-1/2 inch hole for this grommet cap and liner set dictates the drilling step, so using a 2-1/2 inch boring tool will create a hole that accepts the liner without excessive play around the perimeter. Because the assembly is described as a 3 inch grommet, the visible flange area extends beyond the cutout, covering any minor chipping from the drilling operation at the edge of the hole. The cap and liner pairing in a single set ensures that once the 2-1/2 inch opening is prepared, the matching parts work together for a unified finish that sits properly on the surface. With the EDP3-93D designation tied to desert sand, installers can repeat the same fit and appearance across multiple workstations or shelves that share this specification.
This Doug Mockett and Company, Inc. grommet set is listed in the shelf, closet and garage organization and multimedia and workspace components categories, placing it naturally in desks, work surfaces, and storage systems where controlled openings are needed. The 2-1/2 inch hole size means it suits panels that can accept a standard round cutout, common in many shop and site tools, so installers can apply it in new builds or retrofits that follow that dimension. Its 3 inch overall grommet description suggests a presence large enough to be practical in general workspace layouts, offering a defined route for cables or other pass-throughs in panels and tops. The desert sand finish attached to the EDP3-93D part number gives designers and builders a light, neutral tone suited for coordinated runs of shelving or worktops in similar shades.
By specifying both a 3 inch grommet identity and a 2-1/2 inch hole requirement, this cap and liner set removes guesswork around sizing, so layout, drilling, and finishing steps can be planned in a single sequence. The liner component seats in the cutout and defines the internal opening, supporting a consistent edge that resists wear from repeated use of the hole in normal workspace activity. The matching cap in the set works with that liner, creating a finished face that hides raw panel edges, which can reduce rework caused by exposed substrates around drilled openings. With its desert sand color coded as part of SAP and web descriptions, the EDP3-93D grommet allows projects to repeat the same visual standard, simplifying ordering and replacement when additional openings on shelves, closets, or work surfaces need to match existing parts.
The grommet cap and liner set is specified for a 2-1/2 inch hole, so panels drilled to that size will accept the liner for a stable fit in typical work surfaces.
The product is described as a 3 inch grommet, indicating the overall grommet footprint on the surface is larger than the 2-1/2 inch cutout, covering the hole edge.
The grommet cap and liner set is listed in desert sand, giving a light neutral finish that coordinates with many laminates and painted panels.
This grommet set is produced by Doug Mockett and Company, Inc., aligning it with the Mockett line of multimedia and workspace components.
The SAP description referencing flip flop grommet indicates a cap style that opens and closes, allowing access to the hole while keeping a finished look.
The grommet is categorized under shelf, closet and garage organization and multimedia and workspace components, positioning it for desks, worktops, and storage panels.
The EDP3-93D grommet cap and liner set combines a 3 inch grommet form with a 2-1/2 inch hole requirement, giving a clear target for panel drilling and visible coverage. Its desert sand finish ties into both SAP and web descriptions, simplifying specification when matching other project elements. Positioned within shelf, closet and garage organization and multimedia and workspace components, it suits work surfaces, storage panels, and similar installations needing a defined opening. For projects calling for a neutral-tone Mockett grommet that aligns hole size and visible flange dimensions, this set offers a straightforward choice.
Sold In: 1 Each
