3" Grommet Cap and Liner Set for 2-1/2" Hole, White
Description
3 Inch Grommet Cap And Liner Set For Clean Pass-Through
3 inch grommet cap and liner set describes a two-piece grommet designed for a 2-1/2 inch hole, giving a defined pass-through point in desktops or panels so cables route through a fixed location instead of across work surfaces. The white finish ties into light-colored furniture or cabinetry, so the opening blends into painted panels or laminate tops instead of standing out. The design as a grommet cap and hole liner means the hole edge is fully sleeved, so the cut edge is covered as wires pass through. The cap has a permanent cut out for wires, creating a stable opening that does not shift, so cables stay organized once installed. Being part of the Grommets class under multimedia and workspace components aligns it with desk and workcenter layouts where a clean wire opening is needed.
Verified Grommet Details That Support Workspace Layouts
- The two-piece style grommet with cap and liner creates a finished collar around the 2-1/2 inch bore hole, so the cut edge is concealed and the pass-through looks planned on desktops, cabinets, or panels.
- The cap having a permanent cut out for wires defines a fixed cable channel through the 3 inch opening, so cords feed in the same spot every time instead of wandering across the desk surface.
- The 3 inch grommet cap and liner set is identified as a multimedia and workspace component, so it suits furniture layouts where electronics, monitors, or power modules need a controlled cable path through the work surface.
- The white color matches the SAP description grommet+cap, white, so it coordinates with white casework or light-toned workspace components for a consistent appearance around the cable hole.
- The product is in the shelf, closet and garage organization category as well, so the grommet can be used in storage panels where wires drop behind shelving or organizers through a dedicated opening.
Grommet Cap And Liner Details For Straightforward Fit
The 3 inch grommet cap and liner set is built for a 2-1/2 inch hole, so the opening in the panel or work surface is defined before installation, creating a predictable fit. The style as a grommet cap and hole liner means the liner occupies the bore and the cap nests into it, so the assembly seats into the hole as a matched pair instead of relying on the panel edge alone. The designation as a grommet in the multimedia and workspace components group ties it to typical desk or workcenter thicknesses, so installers can plan the bore for that setting. With the cap having a permanent cut out for wires, there is no extra step to create a cable opening in the cap, so once the pair is fitted into the 2-1/2 inch hole the path for wires is already defined.
Using The EDP3-95 Grommet In Real Projects
Where This 3 Inch Grommet Cap And Liner Set Fits
The 3 inch grommet cap and liner set for a 2-1/2 inch hole fits into furniture or panels where a controlled pass-through is needed, so desktops, counters, or cabinet tops can route cables down through the surface into concealed spaces. Being part of the shelf, closet and garage organization category allows the same style grommet to be used in storage applications, so electronics or chargers on a shelf can route wires behind the unit through the same white opening. Its placement in multimedia and workspace components shows it suits desks or workstations where monitors, phones, or docking stations sit on top and feed cables through the grommet. The white color described in the SAP description grommet+cap, white lets it sit cleanly in light worktops or painted closets, so the cable opening aligns with the surrounding finish.
Why This White Wire Grommet Cap Supports Repeatable Results
The manufacturer part number EDP3-95 identifies a specific Doug Mockett and Company, Inc. grommet, so repeat ordering for multiple workstations or matching replacements keeps the openings consistent across a project. The defined 2-1/2 inch hole requirement standardizes drilling on site or in the shop, so boring operations stay uniform from panel to panel and the grommet cap and liner set drops into each opening with the same fit. The cap having a permanent cut out for wires removes variation in the cable opening, so every station presents the same slot for cords, which simplifies layout for power, data, and device leads. Because this style grommet has two pieces, installers can set the liner in the bore and then place the cap, so the visible ring and cut out align the same way across desks, shelves, or work tables.
Common Questions About The EDP3-95 Grommet Cap And Liner
What hole size does the 3 inch grommet cap and liner set use?
The 3 inch grommet cap and liner set is designed for a 2-1/2 inch hole, so boring that diameter prepares the panel to accept the liner and cap as a matched assembly.
What does the permanent cut out in the cap do?
The cap has a permanent cut out for wires, so cables pass through a fixed opening, keeping cords gathered at that point rather than spreading across the work surface.
How does the two-piece grommet design affect installation?
This style grommet has two pieces, a cap and hole liner, so the liner first sleeves the 2-1/2 inch bore and the cap then seats into it, giving a finished edge around the opening.
Where is this white grommet typically used?
The grommet is listed under multimedia and workspace components and shelf, closet and garage organization, so it suits desks, workstations, and storage areas needing a cable pass-through.
What does the Doug Mockett EDP3-95 part number indicate?
Manufacturer part EDP3-95 identifies this specific Doug Mockett and Company, Inc. 3 inch grommet cap and liner set, so repeat projects can use the same style consistently.
Why choose a white grommet+cap for workspace projects?
The SAP description grommet+cap, white indicates a white finish, so the grommet blends into light-colored desks, cabinets, or closet systems where a neutral cable opening is preferred.
Select This 3 Inch Grommet Set For Planned Cable Openings
The 3 inch grommet cap and liner set for a 2-1/2 inch hole from Doug Mockett and Company, Inc. gives a defined wire path in desks, closets, and workspace layouts, with a white grommet+cap finish that matches light surfaces so cable openings stay orderly and intentional.
