1-3/4" Grommet Cap and Liner Set for 1-1/2" Hole, White
Description
1-3/4 Grommet Cap And Liner Set For Clean Wire Pass-Through
1-3/4 grommet cap and liner set for 1-1/2 inch hole, white, manages wires through a work surface opening so cables route cleanly through the hole instead of over the edge, which keeps desktops, counters, or shelf panels more organized and easier to work on.
The style grommet has two pieces - a grommet cap and a hole liner - so the liner finishes the cut edge of the 1-1/2 inch bore while the cap covers the opening, giving a more finished look on both the work side and the inside edge of the hole.
The cap has a permanent cut out for wires, so the cable opening stays consistent every time you remove and replace the cap, which helps maintain repeatable cable routing for computer, multimedia, or power cords in office, closet, or garage work areas.
The grommet is part of the Doug Mockett and Company, Inc. multimedia and workspace components line in the grommets class, so it is suited to typical desk, countertop, and work surface layouts in woodworking and custom fabrication projects where a 1-1/2 inch bore is specified.
Grommet Set Details That Support Workspace Layouts
- The 1-3/4 grommet cap and liner set for a 1-1/2 inch hole ties the visible cap size to the bore requirement, helping layouts where the hole size and flange size must coordinate across multiple cutouts.
- The white color on the grommet cap and liner works with light work surfaces, so the wire opening blends into white or light-toned desks and counters for a consistent appearance across several stations.
- The cap and liner are sold together as a set, so the finished edge and the cover are matched pieces, which simplifies specifying a single part for both the bore lining and the visible cap.
- The style grommet is available in eight sizes from 3/4 inch bore hole diameter to 4 inch bore hole diameter, so one design approach can cover multiple cable pass-through sizes in the same project.
- The grommet is sold in full box quantities of 5 and 10, so installers planning office or shop runs can order by project station counts rather than single loose parts.
Hole Size And Cap Layout For Straightforward Installation
The 1-3/4 grommet cap and liner set is designed for a 1-1/2 inch bore hole diameter, so installers cut a standard round 1-1/2 inch opening and then drop in the liner, which streamlines drilling because the same bit size repeats across the project.
The liner is sized to fit the 1-1/2 inch hole, so it covers the raw cut edge around the bore, which is useful on laminate, veneered, or painted surfaces where exposed core material at the cable opening is undesirable.
The cap for the 1-3/4 set rests in the liner opening, so the visible flange of the cap defines the final appearance around the cable exit, helping align the grommet visually with other hardware or layout lines on the work surface.
The permanent cut out for wires in the cap sets a fixed path for cables through the grommet, which supports repeatable cable bend and direction from one workstation to the next, useful in multimedia and workspace components layouts.
Using This Doug Mockett Grommet Set In Projects
Where The 1-3/4 Grommet Cap And Liner Set Works
The 1-3/4 grommet cap and liner set for a 1-1/2 inch hole, white, is categorized under shelf, closet, and garage organization as well as multimedia and workspace components, so it aligns with work surfaces in offices, storage areas, and shop benches that route cables through panels.
Being in the grommets product class, the BG3-95 part focuses on organizing and protecting wire pass-through points, so it fits applications where cords need a defined path through horizontal or vertical surfaces, such as desks, counters, or cabinetry panels.
The white finish works naturally with painted or melamine white fixtures often used in closets and office furniture, so the grommets can visually tie into standard white casework while still defining a clear opening for wires and cables.
Because the style grommet belongs to a family with eight sizes from 3/4 inch to 4 inch bore hole diameters, this 1-1/2 inch bore version can be used alongside larger or smaller bores in the same project while maintaining a consistent product line appearance.
Why BG3-95 Details Matter For Repeatable Layouts
The manufacturer part BG3-95 identifies this specific 1-3/4 grommet cap and liner set in white, so specifiers can call out the exact part on drawings or material lists, which supports consistent ordering and uniform appearance across multiple locations in a build.
The permanent cut out for wires in the grommet cap removes the step of cutting or snapping a custom opening for each install, so installers can drop in the cap and immediately route cables, reducing handling time per workstation.
The pairing of cap and liner in one style grommet means the edge treatment and visible cap profile are engineered together, which helps the liner grip the 1-1/2 inch bore while the cap seats securely, giving a uniform sightline around the wire exit.
The product is listed under multimedia and workspace components, so the design suits common cable types used around desks and equipment racks, helping keep low-voltage and power cords directed through a predictable opening on the surface.
Across a project that uses several bore sizes, the availability of eight sizes in this style grommet lets designers scale openings to cable volume while maintaining family consistency, which simplifies future replacements or additions because the same style and brand remain in use.
Common Questions About This White Wire Grommet Set
What hole size does the BG3-95 grommet set use?
The BG3-95 1-3/4 grommet cap and liner set is designed for a 1-1/2 inch bore hole diameter, so drilling that size matches the liner fit and supports a clean finished opening.
How does the permanent wire cut out help installation?
The grommet cap has a permanent cut out for wires, so the cable opening is already formed, letting installers route cables immediately without modifying the cap on site.
What surfaces are suited to this white desk grommet cap?
The 1-3/4 grommet cap and liner set is categorized for multimedia and workspace components and shelf, closet, and garage organization, fitting typical desks, counters, and storage surfaces that carry routed cables.
Why use a cap and liner set instead of a single piece?
This style grommet has a separate hole liner and cap, so the liner finishes the 1-1/2 inch bore edge while the cap defines the visible opening, giving a neater transition around cables.
How does the white finish support project layouts?
The white color on the 1-3/4 grommet cap and liner helps the wire opening blend with white or light-toned work surfaces, supporting consistent appearance on coordinated furniture runs.
When is the 1-1/2 inch bore version a good fit?
The 1-1/2 inch bore size works when cable bundles are moderate and a compact opening is preferred, while still matching the broader eight-size family used across a multimedia workspace project.
Select The BG3-95 Grommet Set For Defined Cable Openings
The 1-3/4 grommet cap and liner set for a 1-1/2 inch hole, white, from Doug Mockett and Company, Inc. combines a matched cap, liner, and permanent wire cut out so each bore in your multimedia or workspace layout gains a consistent, finished cable opening.
By specifying the BG3-95 part number wherever a 1-1/2 inch bore is called out, projects that span offices, closets, or garage workstations keep the same grommet style and color across multiple locations, helping layouts read as one coordinated system.
