2" Grommet Set for 1-3/4" Hole, Light Gray
Description
2" Grommet Set For 1-3/4" Hole Use
2" grommet set for 1-3/4" hole describes a Doug Mockett and Company, Inc. two-piece grommet designed for routing wires through a work surface. This setup organizes cords at desks or workstations by passing them through a finished opening. The product consists of a grommet cap and a matching hole liner, so the bore edge and the visible top are both finished in the same light gray tone. The grommet is part of a broader line available in eight sizes from 3/4" bore hole diameter to 4" bore hole diameter, which helps standardize hole sizes across multiple furniture pieces. The light gray color coordinates with many contemporary office and shop surfaces, keeping cable routes visually neat in multimedia and workspace components.
Functional Details That Support Wire Routing
- This style grommet has two pieces - a grommet cap and hole liner - so both the work surface opening and the top view are finished in the same system, giving a consistent, professional pass-through point for wiring.
- The cap has a permanent cut out for wires, which holds cables in a defined path through the work surface and reduces play at the edge of the hole during everyday use.
- The product is available in eight sizes from 3/4" bore hole diameter to 4" bore hole diameter, allowing the same style to be used across small device leads up to heavier cable clusters on matching furniture runs.
- The set is classified under shelf, closet and garage organization and multimedia and workspace components, indicating its role in routing and organizing wiring where equipment, shelving, or workstations require a clean cord path.
- The light gray finish on the SG3-92 variant visually softens the transition from surface to cable opening, helping cords blend into neutral-colored desks and work areas.
Work Surface Hole And Grommet Fit Details
The 2" grommet set for 1-3/4" hole is specified so the grommet matches a 1-3/4" bore in the work surface, providing a defined relationship between the drilled opening and the grommet components. The two-piece design, consisting of a cap and hole liner, lines the cut bore and covers the top side, which helps present a finished edge where wires pass through. Positioned within the multimedia and workspace components category, this grommet manages wire transitions through desks, benches, or similar surfaces where cord routing needs to be concentrated at a single point.
Using This Light Gray Grommet In Projects
Where This 2" Grommet Set Is Typically Used
The 2" grommet set for 1-3/4" hole, in light gray, is categorized under multimedia and workspace components, so it is suited for routing cords and cables through desks, counters, or other work surfaces that carry electronic equipment. Its role within shelf, closet and garage organization points to use in storage or utility areas where power strips, chargers, or devices sit on shelves and need a tidy wire exit through panels. The light gray finish on the SG3-92 version blends into many neutral laminate or painted surfaces, so cable pass-through points can be placed in visible desktop locations without strongly contrasting the surrounding material.
Details That Support Consistent Wire Management Results
The grommet cap and hole liner pairing on this Doug Mockett and Company, Inc. grommet create a continuous sleeve around the 1-3/4" bore, which helps guide wires smoothly through the opening while maintaining a finished edge. The cap has a permanent cut out for wires, so the cable path is fixed in the cap design and does not rely on field modifications, supporting consistent cord routing across multiple installations. Being part of a line with eight sizes from 3/4" bore hole diameter to 4" bore hole diameter allows the same overall style to be applied to different hole diameters, which is useful when coordinating several surfaces that handle different cable volumes. The light gray SG3-92 version aligns visually with many office and shop color schemes, so the wire management points can be planned into layouts without drawing focus away from the work area.
Common Questions About The SG3-92 Grommet Set
What hole size does this 2" grommet set match?
The 2" grommet set for 1-3/4" hole is specified for a 1-3/4" bore hole diameter, so the liner and cap are sized to finish that opening for wire pass-through.
What pieces are used in the SG3-92 grommet assembly?
The SG3-92 grommet set uses two pieces, a grommet cap and a hole liner, so the cut bore and the visible top are both finished where cables pass through.
How does the permanent cut out affect wire routing?
The cap has a permanent cut out for wires, providing a defined opening that guides cables through the work surface and keeps them grouped at a fixed point.
In what environments is this light gray grommet typically used?
The grommet is listed under multimedia and workspace components and shelf, closet and garage organization, supporting cable routing in desks, workstations, and storage areas.
What does the SG3-92 designation refer to?
SG3-92 is the manufacturer part number for this Doug Mockett and Company, Inc. light gray grommet set, identifying this specific size and finish in the product line.
How does the size range of this grommet line help projects?
The line spans eight sizes from 3/4" bore hole diameter to 4" bore hole diameter, allowing similar styling across different cable capacities and panel layouts.
Selecting This Grommet Set For Wire Routing
The 2" grommet set for 1-3/4" hole in light gray from Doug Mockett and Company, Inc. offers a defined wire pass-through point, using a grommet cap and hole liner to finish a 1-3/4" bore. With a cap that has a permanent cut out for wires and sizing tied to a specific bore diameter, this SG3-92 grommet helps organize cable transitions through desks, shelves, and other multimedia or workspace surfaces. For projects that need consistent, neutral-toned cord routing points across several work areas, this light gray set aligns finish, function, and bore size.
