2" Grommet Set for 1-3/4" Hole, Polished Brass

2" Grommet Set For 1-3/4" Hole Polished Brass

2" grommet set for 1-3/4" hole polished brass describes a two-piece Doug Mockett and Company, Inc. grommet designed for multimedia and workspace components. The set uses a grommet cap and a matching hole liner so the 1-3/4" bore stays clean and protected around the full circumference. The polished brass appearance comes from a brass plated finish, giving a bright, uniform edge around the cutout that matches brass-focused layouts. The cap has a permanent cut out for wires, so cords pass through the desktop opening without rubbing directly on the wood. This two-piece design belongs to Mockett's SG5 family, identified by manufacturer part SG5-3, which helps match this grommet to existing layouts using the same system. As part of the Grommets product class within shelf, closet, and garage organization, it suits organized cable pass-through points in built-in workspaces.

Brass Grommet Details That Support Clean Cable Runs

• The grommet cap and hole liner design covers both the top surface and the bore wall, so the 1-3/4" hole edge stays protected and the finished brass ring looks consistent around the opening.
• The polished brass finish is achieved with brass plated construction, giving a bright metallic look that coordinates with other brass components in multimedia work surfaces or cabinetry runs.
• The cap has a permanent cut out for wires, creating a dedicated path for cords so they route through the desktop opening in a known location instead of wandering across the full hole area.
• The 2" grommet set is built around a 1-3/4" hole, matching that bore size so installers cutting that opening can expect the liner to sit in the cutout and the cap to register against the surface.
• The SG5-3 designation ties this grommet to Doug Mockett and Company, Inc.'s SG5 line, which helps match this piece with other SG5 bore diameters when coordinating multiple pass-through points in the same project.

Brass Grommet Fit For 1-3/4 Inch Bore Holes

This grommet set is defined for a 1-3/4" hole, so it works where that bore has already been specified in drawings or created in the field. The hole liner is sized to sit in the 1-3/4" bore depth diameter, so the sidewall of the drilled opening becomes a continuous brass plated surface rather than raw substrate. On the surface, the 2" grommet cap registers over the liner, so the visible opening reads as a brass ring around the cord pass-through. Because the cap has a permanent cut out for wires, the working clearance is fixed, which keeps the opening shape consistent every time the cap is used in desktop or cabinet top layouts.

Using This Brass Grommet Set In Work Surfaces

Where This Polished Brass Grommet Set Performs

This product is categorized under multimedia and workspace components, so it suits desks, counters, and other work surfaces that need controlled wire pass-through points. The 2" grommet set for 1-3/4" hole polished brass format fits layouts that already call for a 1-3/4" bore, giving a defined trim piece for that cutout. Within shelf, closet, and garage organization projects, it can serve as the finished edge for power or data leads leaving cabinets or closet organizers. The brass plated finish presents as polished brass, so it coordinates with other brass hardware in the same installation, helping the cable exit point look intentional instead of like a rough drilled opening.

Why The Two-Piece Design Supports Repeatable Results

The style of this grommet is defined as two pieces - a grommet cap and a hole liner - which means the bore wall and top surface are handled by separate parts. The liner occupies the 1-3/4" bore hole depth diameter, giving a defined sleeve so every cut at that size accepts the same interior piece. The cap then seats over the liner, relying on the SG5-3 dimensions so each replacement or additional install feels consistent from one workstation to another. The permanent cut out for wires in the cap keeps the opening shape from changing, which matters when routing similar cable bundles across multiple desks or cabinets. By using a brass plated construction to achieve the polished brass appearance, the finish across cap and liner reads as one continuous ring, supporting uniform results in repeated installations throughout a project.

Common Brass Grommet Questions For SG5-3 Users

Select This Brass Grommet Set For Defined Cable Pass-Throughs

The 2" grommet set for 1-3/4" hole polished brass pairs Doug Mockett and Company, Inc.'s SG5-3 geometry with a brass plated finish, giving a consistent solution for cord pass-throughs in multimedia and workspace layouts. The two-piece style, with grommet cap and hole liner, defines both the bore wall and surface opening, supported by a permanent cut out for wires that maintains a stable exit path. For projects calling for a 1-3/4" bore and a polished brass edge, this grommet set from Wurth Baer Supply aligns the opening size, finish, and wire routing in a single part choice.