2-3/8" Grommet Set for 2" Hole, Light Gray

2-3/8" Grommet Set For Clean Wire Pass-Through

2-3/8" grommet set for 2" hole gives a sized match between the grommet and the bore, so wires route through a finished opening instead of a raw cutout. The Doug Mockett and Company, Inc. design keeps the edge protected, which helps reduce wear on cables at the hole.

This style grommet has two pieces; grommet cap and hole liner, so the liner shields the full bore while the cap provides the visible finish in light gray. That structure creates a consistent edge profile at the desk or panel surface, useful in multimedia and workspace components where repeated cable movement occurs.

The cap has permanent cut out for wires, so the opening stays fixed instead of being adjusted on-site. That fixed geometry supports repeat layouts across multiple workstations when running power or data through 2" holes.

Available in eight sizes from 3/4" bore hole depth diameter to 4" bore hole diameter, this TG3-92 version targets 2" applications while staying within a system that can match other bore sizes in the same project.

Practical Details That Support Wire Management

• The two-piece design with grommet cap and hole liner covers the entire bore, so cut edges are hidden and the contact surface against wires stays uniform along the hole wall.
• The cap has permanent cut out for wires, so cable pass-through location is predefined, which helps maintain consistent routing and appearance on a run of identical stations.
• The 2-3/8" grommet set for 2" hole matches a 2" bore, so installers drill a standard round hole and drop in a part sized for that opening without secondary cutting.
• The light gray finish on the TG3-92 grommet and cap set provides a neutral look, which helps it blend into many shelf, closet, and garage organization layouts.
• Availability in eight sizes from 3/4" bore hole depth diameter to 4" bore hole diameter allows this style to be used across different panels, so a single family of parts can support varied cable locations.

Installation Fit For 2" Bore Work Surfaces

The 2-3/8" grommet set for 2" hole is intended for a 2" bore hole diameter, so drilling that standard size creates the seat for the liner. This lets installers run a single bit size for panels sharing this grommet and keep setups straightforward.

The grommet cap and hole liner work together, with the liner dropped into the bore and the cap set at the surface. This arrangement gives a defined edge at the desktop or panel, which supports smoother cable transitions through the opening.

Because the cap has permanent cut out for wires, the opening position relative to the bore is fixed, which supports predictable cable exit points when repeating the detail across multiple furniture or workspace components.

Using This Light Gray TG3-92 Grommet In Projects

Where The TG3-92 Grommet Set Fits Best

The 2-3/8" grommet set for 2" hole fits standard 2" bore openings in multimedia and workspace components, so it suits desktops, counters, and panels where cables pass between equipment and power or data sources. As part of a grommets product class, it supports shelf, closet, and garage organization layouts that need a managed opening through a panel.

The grommet cap and hole liner arrangement is useful wherever a cut edge needs covering, because the liner occupies the bore and the cap defines the visible perimeter. In light gray, the TG3-92 grommet blends with many work surfaces, so it can serve in both office-style installations and utility areas without drawing focus away from equipment.

Since the design is available in eight sizes from 3/4" bore hole depth diameter to 4" bore hole diameter, a project can use this same style for smaller device leads and larger cable bundles on different parts of the installation while keeping a consistent look.

Why This Grommet Design Supports Repeatable Results

The permanent cut out for wires in the cap creates a fixed opening, so each 2-3/8" grommet set for 2" hole presents the same cable path from unit to unit. That consistency helps when laying out rows of workstations or cabinets that need identical routing points.

The grommet cap and hole liner pair encloses the bore, which prevents variation in exposed edge quality from affecting the finished result. Even if panel cuts vary slightly within normal tolerances, the liner acts as the final interface against cables, giving a more predictable contact surface at every location.

Using the TG3-92 grommet within the eight-size range from 3/4" bore hole depth diameter to 4" bore hole diameter lets planners standardize on one family of Doug Mockett and Company, Inc. parts. That simplifies specifying for different panel openings in the same build, while retaining the same installation approach across varied cable runs.

Common Questions About The TG3-92 Grommet Set

Select This Grommet Set For 2" Bore Projects

The 2-3/8" grommet set for 2" hole, light gray, ties a standard 2" bore to a finished wire pass-through, giving panels a defined opening sized to common cable runs. Using the TG3-92 grommet cap and hole liner keeps cut edges covered and cable paths consistent, so desks, closets, and garage panels in multimedia or workspace builds share a clean, repeatable routing point.