2-3/8 Grommet Set For 2 Inch Wire Runs

2-3/8 grommet set for 2 inch hole, matte black gives you a matched cap and liner sized for a 2 inch bore hole, so cord pass-throughs in desks, cabinets, or work surfaces stay clean and consistently sized. The grommet cap and hole liner work together as a two-piece system, so the cutout edge is covered and the opening stays stable over time. The matte black finish keeps reflections down, which helps the grommet blend into dark tops and modern fixtures. This style grommet is part of a family that runs from 3/4 inch bore hole diameter to 4 inch bore hole diameter, so the 2 inch size slots neatly into common layouts. The permanent cut out in the cap gives wires a dedicated exit path, so cables sit in a defined channel instead of wandering across the work surface.

Key Grommet Details That Support Clean Installs

• The two-piece grommet cap and hole liner design creates a finished edge around the 2 inch bore hole, which hides raw cut surfaces and helps protect cables as they pass through.
• The cap has a permanent cut out for wires, so once the hole is drilled, routing cords is straightforward and repeatable across multiple stations or cabinets.
• The grommet is sized as a 2-3/8 grommet set for 2 inch hole, which balances a compact footprint with enough internal space for typical wire bundles.
• The matte black finish on the grommet cap presents a low-glare surface, which keeps the opening visually quiet on dark desktops, panels, or equipment surrounds.
• The style is available in eight sizes from 3/4 inch bore hole diameter to 4 inch bore hole diameter, so shop standards can stay consistent while you scale layouts up or down.

Installation Fit For 2 Inch Bore Hole Cutouts

This grommet set is configured for a 2 inch bore hole, so installers can base layout and drilling on that standard dimension. The liner drops into the bore hole depth, so once the cut is made to the right diameter, the edge is captured by the liner wall. The two-piece format means the liner can seat in the hole first and the cap can then be placed on top, which simplifies alignment on thicker or laminated worktops. With the permanent cut out built into the cap, there is no need to adjust the opening after install, so repeated installations across a run of desks or cabinets follow the same workflow.

Using This Matte Black Grommet Set In Projects

Where This 2-3/8 Grommet Set Works Best

This style grommet is designed for multimedia and workspace components, so it fits naturally into desks, counters, and cabinet tops that carry power or data lines. The 2-3/8 grommet set for 2 inch hole format suits runs where a standard 2 inch cutout is already part of the plan. Its role in shelf, closet, and garage organization is to give a defined pass-through point, so cords can transition through panels without chewing up the edge. The matte black color is well suited to dark work surfaces and hardware schemes, so the opening does its job without drawing attention in finished installations.

Why The TG3-90 Design Supports Repeatable Results

The Doug Mockett and Company, Inc. TG3-90 grommet uses a two-piece cap and liner layout, which helps repeatability when you are cutting multiple 2 inch holes in a row. Once the correct bore hole diameter is set on your tooling, the liner drops in and defines the interface, so every opening presents the same finished edge. The permanent cut out for wires in the cap standardizes the exit path, which keeps cable routing consistent from station to station. Because this grommet belongs to a line offered in eight sizes from 3/4 inch bore hole diameter to 4 inch bore hole diameter, shops can stay within one style across varied runs, which simplifies planning and layout notes. The matte black finish on the TG3-90 keeps the visible trim understated, which helps the focus stay on the work surface rather than the wire opening.

Common Questions About The TG3-90 Grommet Set

Selecting This Grommet Set For Your Next Run

The 2-3/8 grommet set for 2 inch hole, matte black offers a straightforward way to finish cable pass-throughs wherever a 2 inch bore hole is part of the layout. The Doug Mockett and Company, Inc. TG3-90 configuration with grommet cap and hole liner turns a drilled opening into a defined cable point that repeats cleanly from station to station. For projects that call for coordinated multimedia and workspace components in a dark finish, this black grommet and cap set aligns with standard shop processes and keeps wire runs organized.