2" Grommet Set for 1-3/4" Hole, Polished Chrome
Description
2" Grommet Set For Clean Wire Pass-Through
2" grommet set for 1-3/4" hole keeps a defined opening for wires, so cords pass through furniture or panels without cutting raw edges, which protects both cable jackets and finished surfaces in daily use.
The set is part of the grommets product class in the multimedia and workspace components category, so it is suited to routing power or data lines through desktops, counters, or panels in organized runs.
The Doug Mockett and Company, Inc. brand identifies this as a specialized component for woodworking and workspace build-outs, so fabricators can match it to other hardware from the same line in office or residential projects.
The grommet is described with a 2 inch size paired to a 1-3/4 inch hole, which means the liner fits into the bore while the cap covers the cutout, giving a finished appearance around the opening.
The polished chrome finish gives a bright metallic look on the visible cap, which helps the wire exit point tie into other chrome or chrome plated hardware across the installation.
The SAP description as chrome plated supports that the visible parts present a chrome plated surface, which matters wherever a consistent metal finish is part of the design intent.
Key Grommet Details That Support Daily Use
- The style grommet has two pieces, a grommet cap and hole liner, so the bore edge is lined while the top is finished, which creates a clean transition from panel surface to wiring space.
- The cap has a permanent cut out for wires, so cables always pass through the same opening, which keeps conductors grouped together and reduces random notches or field cuts in the surrounding material.
- The product is listed within shelf, closet and garage organization, as well as multimedia and workspace components, so it serves in storage systems and work areas where routed wiring supports equipment or lighting.
- The set is available as part of a family offered in eight sizes from 3/4 inch bore hole diameter to 4 inch bore hole diameter, so builders can scale from small device leads up to larger cable bundles while staying in the same visual style.
- The product is sold in full box quantities only, in full box quantities of 5 and 10, which suits shop workflows that install multiple openings across matching stations, cabinets, or panels in one project run.
Installation Fit Around 1-3/4 Inch Bore Holes
The 2 inch grommet set for 1-3/4 inch hole is specified to work with a 1-3/4 inch bore, so installers can cut that diameter and expect the liner to seat into the opening while the cap spans over the edge.
The web description notes the grommet style with cap and hole liner, so the liner occupies the drilled bore and the cap sits at the surface, which supports repeatable placement when drilling multiple identical holes.
The permanent cut out for wires is formed in the cap, so there is a defined path for cords without additional cutting, which speeds fit-out during desk or cabinet assembly when several grommets are used in sequence.
The product sits within the multimedia and workspace components group, so its dimensions and shape support passing typical workspace cords through horizontal or vertical panels where a 1-3/4 inch hole has been bored.
Using This Polished Chrome Grommet In Projects
Where This Doug Mockett Grommet Set Performs
The 2 inch grommet set for 1-3/4 inch hole is placed in the grommets class under multimedia and workspace components, so it functions as a cable pass-through in desks, counters, and panel systems that need organized wiring runs.
The cap and liner configuration means the liner resides inside the 1-3/4 inch bore, while the cap covers the opening, so the assembly shields the cut edge and presents a finished ring where cords emerge from the surface.
Because the cap has a permanent cut out for wires, the opening remains consistent from unit to unit, which is useful on installations like workstations or closet systems where repeated cutouts must align visually and functionally.
The polished chrome finish, supported by the chrome plated description, suits environments that use chrome hardware on handles, hinges, or closet rods, so the grommet can visually coordinate with other visible fittings.
The listing within shelf, closet and garage organization signals that the grommet set supports routing wires around storage and garage systems, so lighting or powered tools can be supplied through panels while maintaining a finished edge.
The eight-size family range from 3/4 inch bore hole diameter to 4 inch bore hole diameter means this style addresses both compact electronics cables and larger bundles, so installers can select related sizes for different stations within the same project.
Being branded Doug Mockett and Company, Inc. situates the part within a known hardware line used in woodworking and workspace components, so shops standardizing on that brand can integrate this grommet with their existing selections.
Details That Support Consistent Wire Management Results
The permanent cut out in the cap fixes the cable exit location, so wires exit in a predictable spot, which keeps conductors directed and avoids irregular openings that could interfere with adjacent components or contents.
The 2 inch grommet size mated to a 1-3/4 inch bore means the liner fits into a defined drilled hole while leaving material for the flange of the cap to rest on, which supports a snug fit and consistent reveal around the opening.
The two-piece construction with cap and hole liner separates the structural lining from the visible face, so the liner manages the bore interface while the cap presents the chrome surface, which helps preserve appearance even if the bore edge is rough.
The polished chrome surface gives a reflective metallic look described as chrome plated, so the cap can act as a small trim element, helping tie wiring points into the overall metal and finish scheme of the installation.
The designation within multimedia and workspace components points to use with devices that rely on constant cabling, so the fixed opening supports frequent cord movement through the grommet without altering the panel or finish.
The fact that the product is sold in full box quantities only, in full boxes of 5 and 10, aligns with production jobs where multiple identical grommets are installed together, so fabricators can plan consistent layouts using units from the same run.
Common Questions About This Chrome Grommet Set
What hole size does this 2" grommet set work with?
The 2" grommet set for 1-3/4" hole is specified for a 1-3/4 inch bore, so drilling that size allows the liner to fit properly and the cap to cover the opening.
What pieces are in this grommet style design?
This style grommet has two pieces, a grommet cap and hole liner, so the liner occupies the bore and the cap finishes the surface around the wire opening.
How are wires routed through the Doug Mockett SG5-26 grommet?
The cap has a permanent cut out for wires, so cords pass through that defined opening without further cutting at the panel or cap.
What finish does this polished chrome grommet provide?
The product name and SAP description describe it as polished chrome and chrome plated, so the visible cap presents a bright chrome metal appearance.
In what applications is this workspace grommet typically used?
The category places it under shelf, closet and garage organization and multimedia and workspace components, so it is applied where wiring passes through panels in those areas.
What does the SG5-26 manufacturer part number indicate?
The manufacturer part number SG5-26 identifies this specific Doug Mockett and Company, Inc. polished chrome grommet set for ordering and matching within the product line.
Select This Grommet Set For Organized Wiring Runs
The 2 inch grommet set for 1-3/4 inch hole from Doug Mockett and Company, Inc. provides a polished chrome, chrome plated cap and liner assembly, so each drilled opening becomes a finished cable exit ready for multimedia and workspace components.
The two-piece style with grommet cap, hole liner, and permanent cut out for wires supports repeatable wire routing across shelf, closet and garage organization projects, especially when ordered in full box quantities of 5 or 10 for multi-station layouts.
