3-1/2 Inch Wire Grommet Set For Clean Pass-Through

3-1/2 inch wire grommet set describes a Doug Mockett and Company, Inc. 3-1/2 inch wire grommet set designed for a 3 inch hole, so you get a finished wire pass-through sized for common desktop and worksurface bores. The XG3-90 set is a two-piece style grommet with a grommet cap and matching hole liner, which creates a continuous edge for the full depth of the bore so cables do not ride against raw panel material. The cap has a permanent cut out for wires, so pass-through is always open without needing to rotate or remove parts during daily use. The matte black finish provides a neutral look on desks, shelving, or multimedia stations, helping the opening disappear visually while still organizing cables.

Key Details Of This Matte Black Wire Grommet

• The 3-1/2 inch wire grommet set is sized for a 3 inch hole, aligning cap and liner to a common bore size so installers can drill a straightforward round opening and drop the set into place.
• The grommet cap and hole liner two-piece construction provides a finished edge at the surface and along the bore depth, which helps protect wire jackets and gives a cleaner transition where cables exit the panel.
• The cap has a permanent cut out for wires, keeping the opening fixed and predictable so users can route cords without adjusting the cap position during moves or equipment changes.
• The matte black finish on the XG3-90 wire grommet blends with dark work surfaces and equipment, which helps the wire opening appear intentional on desks, closet shelves, and garage work areas.
• The set is identified by manufacturer part XG3-90 and categorized as a grommet for multimedia and workspace components, which helps specifiers match it to other Doug Mockett and Company, Inc. components during project planning.

Wire Grommet Fit For 3 Inch Bore Installations

This matte black wire grommet set is designed for a 3 inch hole, so layout begins with a single 3 inch bore through the work surface and continues with dropping in the liner for a snug, centered fit. The grommet cap then sits on the surface over the liner, so the visible edge aligns with the opening and covers minor bore irregularities from drilling. Because the cap has a permanent cut out for wires, there is no secondary cutting step on site to open the pass-through, which simplifies installation in production or retrofit work. As part of the grommets product class within multimedia and workspace components, this set fits into projects where clean routing of cords through furniture, shelving, or workstations is part of the installation scope.

Using The XG3-90 Grommet In Work Surfaces

Where This 3-1/2 Inch Wire Grommet Set Works

The 3-1/2 inch wire grommet set for 3 inch hole is classified under shelf, closet and garage organization and multimedia and workspace components, so it suits installations where wiring passes through shelves, desktops, or bench tops. The matte black finish supports use on darker surfaces common in office furniture, garage cabinetry, and media stations, so the opening reads as part of the hardware layout rather than a raw cutout. Because the style is a grommet with cap and liner, it aligns with jobs where an installer wants both a clean surface trim and a finished bore wall for a professional cable route. As a grommet in the grommets product class, it can be planned alongside other cable management parts in a coordinated layout across multiple workstations.

Why The Cap And Liner Design Supports Repeatable Results

This style grommet has two pieces; grommet cap and hole liner, so once the 3 inch bore is drilled, the liner defines the internal diameter and supports the cap for a consistent fit from station to station. The cap has permanent cut out for wires, so every opening functions the same way and maintains the same clearance for cords, which helps standardize routing when repeating the detail across a bank of desks or shelving runs. The 3-1/2 inch dimension of the wire grommet set over a 3 inch hole allows the top flange to cover slight chipping around the bore edge, improving the finished appearance without additional edge treatment. The XG3-90 identification from Doug Mockett and Company, Inc. provides a stable reference for reordering or matching on future phases, supporting continuity when expanding a workspace or adding more organized cable pass-through points.

Common Questions About The XG3-90 Wire Grommet

Select This Wire Grommet Set For Clean Cable Runs

The 3-1/2 inch wire grommet set for 3 inch hole, in matte black, provides a grommet cap and hole liner combination that turns a drilled opening into a finished wire route. With the cap permanent cut out for wires and the Doug Mockett and Company, Inc. XG3-90 designation, this grommet aligns with multimedia and workspace components where appearance and cable handling both matter. For desks, shelves, and workstations that need organized cord pass-through points, this set delivers a defined 3 inch bore solution with a consistent look.