4-1/2" Grommet Set for 4" Hole, Putty
Description
4-1/2" Grommet Set For 4" Hole Use
4-1/2" grommet set for 4" hole, putty gives you a matched cap and liner setup for managing cable pass-through in desks and work surfaces. The grommet and cap design organizes wire exits so cords route cleanly through a 4" bore hole. The putty finish coordinates with typical neutral worktops, which helps installations blend into shelf, closet, and garage organization layouts. As a multimedia and workspace grommet, it supports clean cable routing where equipment power and data lines drop through the surface. The grommet class design focuses the wire opening at a single fixed point, which keeps cords from rubbing against raw cut edges of the 4" bore. The overall set is sized for a 4" bore hole diameter, so it ties directly to standard large cable pass-through drilling operations on site.
Key Grommet Details For Workspace Projects
- This style grommet has two pieces; grommet cap and hole liner, so the drilled 4" bore is lined while the top edge is finished for a cleaner cable opening on work surfaces.
- Cap has permanent cut out for wires, which keeps a fixed opening for cords and helps maintain consistent routing without needing separate trim adjustments.
- Available in eight sizes from 3/4" bore hole diameter to 4" bore hole diameter, allowing the same style to be used across multiple panel openings on a project.
- The 4-1/2" grommet set for 4" hole, putty belongs to a grommets product class, aligning with typical multimedia and workspace cable pass-through requirements.
- As a shelf, closet and garage organization component, the grommet helps transition wiring through panels so storage areas stay more orderly around cable penetrations.
4 Inch Bore Wire Grommet Fit And Setup
The 4-1/2" grommet set for 4" hole, putty is sized for a 4" bore hole diameter, so installers can match it to standard 4" holes drilled in desks, counters, or cabinets. The grommet cap and hole liner combination separates the finished cable opening from the cut substrate, which reduces direct cord contact with the raw bore edge. As a grommet in the multimedia and workspace components category, it supports routing for bundled low-voltage and power leads through a single, dedicated opening. The putty color option keeps the visible trim neutral on many laminated or painted tops, helping the cable pass-through read as part of the surface layout.
Using This Grommet Set In Real Projects
Where This Grommet Cap And Liner Work Best
The 4-1/2" grommet set for 4" hole, putty is described for shelf, closet and garage organization, so it fits into storage and utility layouts where wiring passes through vertical or horizontal panels. As a multimedia and workspace component, it suits desks, benches, and workstations that carry computers, chargers, and other powered devices needing a cable drop point. The 4" bore hole diameter sizing locates it at larger pass-throughs, so installers can accommodate multiple cords or thicker bundled cables in a single opening. Across these locations, the grommet cap and hole liner combination turns the drilled opening into a defined routing point that supports neater cable management.
Details That Support Consistent Cable Routing Results
The grommet cap and hole liner structure means the liner addresses the bore wall while the cap controls the visible surface opening, which helps keep wire exit points consistent from one panel to the next. The cap has permanent cut out for wires, so the opening dimension and cable route remain the same over the life of the installation without repositioning the trim. With availability in eight sizes from 3/4" bore hole diameter to 4" bore hole diameter, installers can scale the same style across smaller device leads and larger bundles while retaining a unified appearance. The identified manufacturer part number ZG3-93 ties the 4-1/2" grommet set for 4" hole, putty to a specific Doug Mockett and Company, Inc. pattern, which supports repeat ordering when matching new workstations or replacement panels to an existing layout.
Common Questions About This Putty Grommet Set
What hole size does the 4-1/2" grommet set for 4" hole, putty fit?
The 4-1/2" grommet set for 4" hole, putty is sized for a 4" bore hole diameter, so it aligns with openings drilled specifically at that bore size.
How does the grommet cap and hole liner design help cable runs?
The style uses a cap and hole liner so the liner covers the bore wall while the cap finishes the top, giving cords a defined, smoother routing edge.
What is the purpose of the permanent wire cut out in the cap?
The cap has permanent cut out for wires, providing a fixed opening so cords exit in a controlled location and the pass-through remains consistent over time.
In what types of projects is this grommet typically used?
The 4-1/2" grommet set for 4" hole, putty is listed under shelf, closet and garage organization and multimedia and workspace components, suiting storage and workstation layouts.
How does the putty finish affect workspace appearance?
The putty color gives the grommet a neutral appearance, helping it blend with many worktops so the cable opening looks integrated into the surface.
Why might installers use multiple sizes from this grommet style family?
This style is available in eight sizes from 3/4" to 4" bore hole diameters, so installers can match different cable volumes while keeping a consistent look.
Selecting This Grommet For Your Cable Openings
The 4-1/2" grommet set for 4" hole, putty pairs a cap and liner around a 4" bore hole diameter, giving a defined pass-through for cable runs in desks, closets, and workstations. The permanent cut out for wires in the cap supports repeatable routing points when adding or rearranging equipment. The Doug Mockett and Company, Inc. part ZG3-93 identifies this specific putty finish pattern, so projects that already use it can be extended with matching openings.
