3 Inch Grommet Cap And Liner Set For Wire Runs

3 inch grommet cap and liner set is a two-piece Doug Mockett and Company, Inc. solution for finishing a 2-1/2 inch bore hole in desks, cabinets, and work surfaces. The matched cap and hole liner work together to trim the opening so the cutout edge is covered and protected, which helps deliver a clean, professional look on finished woodworking jobs. The cap has a permanent cut out for wires, so cables pass through the surface while the opening stays visually controlled and consistent from project to project. This style grommet comes from the EDP3-93 line, tying it directly to a known manufacturer part number for repeat ordering and standardization across jobsites. The putty color offers a neutral appearance that blends into many worktops, which helps the focus stay on the installation rather than the wire pass-through.

Practical Details That Support Clean Wire Routing

• The two-piece design, with a separate grommet cap and hole liner, lets the liner sit in the 2-1/2 inch bore while the cap finishes the top edge, creating a more finished opening that hides rough cuts.
• The cap's permanent cut out for wires keeps a consistent pass-through size, so cables route through the same controlled opening on every install, which supports repeatable layouts on multiple stations.
• The set is sized for a 3 inch grommet with a 2-1/2 inch bore hole, aligning the visible top diameter with the underlying cutout, which simplifies layout when matching drilling patterns to grommet trim.
• The putty color option provides a neutral tone on work surfaces, so the grommet reads as part of the surface instead of a contrast point, which helps maintain a uniform appearance on finished casework.
• Being part of the manufacturer's grommet line in multiple sizes from 3/4 inch to 4 inch bore diameters allows this EDP3-93 model to slot into standardized wire management schemes across various panel thicknesses.

Installation Fit Around The 2-1/2 Inch Bore Hole

This grommet cap and liner are built around a 2-1/2 inch bore hole, aligning the liner with a standard drilled opening so the component drops into the cutout without additional shaping. The 3 inch grommet size refers to the overall style and visible footprint, so installers can plan the hole location knowing how much surface area the trim will cover. The two-piece layout lets the liner sit securely in the bore and receive the cap from above, which simplifies sequencing when cutting tops and then finishing them later. The permanent cut out in the cap is ready to route wires once the set is seated, so there is no extra step to create a pass-through after installation.

Using This Putty Grommet In Workspace Projects

Where This Grommet Cap And Liner Set Fits Best

This style grommet is categorized under multimedia and workspace components, so it aligns naturally with desks, conference tops, and similar work surfaces where power, data, or AV cables pass through. The 2-1/2 inch bore hole focus suits openings large enough for multiple low-voltage leads or mixed cable bundles in office and shop environments. Because the cap and liner sit in a drilled opening, the system integrates into wood, laminate, or similar panel materials where standard boring operations are common. The putty finish pairs with many light to medium-toned surfaces, giving installers a way to route wires while keeping the pass-through visually calm on built-ins, workbenches, and cabinetry runs. Within the broader Doug Mockett grommet line, this size can be matched with other bore diameters on the same project to keep a consistent design language across varied stations.

Why The Two-Piece Design And Wire Cutout Matter

The two-piece configuration, combining a grommet cap and a dedicated hole liner, separates the structural role from the visible finish, which helps the liner protect the 2-1/2 inch bore edges while the cap handles appearance. This arrangement supports cleaner results when tops are bored offsite and trimmed later, because the liner still seats correctly as long as the bore is to size. The permanent cut out for wires in the cap keeps the pass-through opening stable over time, so cable routing remains predictable even if wires are added or removed during reconfigurations. The defined 3 inch grommet size gives a reliable footprint for templating and CNC programming, which reduces layout time on repeated furniture or fixture runs. Linking this piece to manufacturer part number EDP3-93 also streamlines reordering for future phases or repairs, since installers can reference the exact model used in prior work.

Common Questions About The EDP3-93 Putty Grommet

Selecting This Grommet Set For Clean Wire Pass-Through

The 3 inch grommet cap and liner set for a 2-1/2 inch hole gives installers a defined way to finish wire pass-throughs with a neutral putty Doug Mockett component. The two-piece style, permanent wire cutout, and EDP3-93 identification align appearance, function, and repeat ordering on desks, cabinets, and workspace fixtures. For projects that call for organized cable routing through bored openings, this grommet set offers a consistent, cataloged option within a broader range of bore diameters.